PDF download Download Article PDF download Download Article

If you’re making or repairing an earring, you’ll need a functioning earring hook to get the job done. When working with non-hoop earrings, use a pair of round- or needle-nosed pliers to open and close the small metal loop attached to the earring hook. If you’re working with hoop earrings, you can use your hands to open and close the earring. Once you get the hang of opening and closing these loops or hoops, you can try adding premade earrings to your hooks!

Method 1
Method 1 of 2:

Opening and Closing the Earring Hook

PDF download Download Article
  1. Examine the bottom end of your French earring hook to find a small metal loop attached. Next, pinch the loose, disconnected end of the wire with a pair of round- or needle-nosed pliers. Pull upwards or outwards on the end of the loop to create a wide gap, which you can use to string on beads or other jewelry attachments. [1]
    • French earring hooks have a gentle curve, and are commonly used in a variety of handmade jewelry. Some varieties of this hook have a wire coil attached to the base.
    • You can use this open loop to attach other earring decorations, like feathers or dangling leather shapes.
    • You can use the same process to open the small metal loops attached to lever-back French clips and earring posts. As the name suggests, lever-back hooks use a clasping mechanism to secure the earring, while posts use a straight strand, or “post,” of metal. [2]
  2. Watermark wikiHow to Attach Earring Hooks
    Examine the bottom portion of a kidney wire and find a fastener securing a loose section of wire into place. Use your fingers to pull the loose section of wire away from the fastener so you can string beads or jewelry attachments onto the hook. [3]
    • As the name suggests, kidney wires are ovular hooks that form complete loops, and have a clasp that prevents the actual earring from sliding off.
    • You can string beads onto kidney wire hooks while also attaching other earring accessories to the bottom loop.
    Advertisement
  3. Watermark wikiHow to Attach Earring Hooks
    Examine your specific set of hoop earrings to see what kind of mechanism holds it together. Pull, twist, or unfasten the loose end of wire to open the earring hook, which allows you to string beads and other trinkets onto the hoop. Note that, unlike other earrings, hoops double as both the hook and the earring itself. [4]
    • Manipulating hoops have a flattened metal end with a hole drilled in the center where the loose section of wire threads through. To connect and disconnect the hoop, slide the loose section of wire through the drilled hole.
    • Leverback hoops use a clasp mechanism, which can be opened and closed to secure the earring.
    • Crimp hoops use a special clip to hold the hoop together. To secure the earring into place, pull down the lever that’s attached to the crimp.
    • Endless hoops are made with a curved, hollow loop that accepts and secures a thin, small section of wire. Stick the thin portion of wire into the hollow loop to secure the jewelry, then pull on the wire to open the hoop.
    • Sleeper hoops come with a twisting mechanism that locks the loose section of wire into place.
  4. Take the beads of your choice and thread them onto the thin, loose section of wire. Next, drag the beads down the length or curve of the wire until you’re happy with their placement. To create a fun pattern or colorful effect, string additional beads onto the hoop or kidney wire. [5]
    • This type of design only works with kidney wires or hoops, as both earring hooks create continuous loops.
  5. Watermark wikiHow to Attach Earring Hooks
    Once your desired beads and decorations are threading onto the earring hook, you can pinch the loose, open end of the earring hook with a round- or needle-nosed set of pliers. Push the wire back to its original position, completing the original loop and securing the earring in place. [6]
    • Double-check that the earring is secure before trying it on.
    • This process doesn’t apply to any kind of hoop earring.
  6. Advertisement
Method 2
Method 2 of 2:

Attaching Premade Earrings to a Hook

PDF download Download Article
  1. Search online or in your local craft store for a set of premade earrings. If you’re purchasing metallic earrings, check that the earring is similar in color to the hooks that you have on hand. If you’re purchasing colorful, non-metallic earrings, then you don’t have to worry about this. [7]
    • For instance, if you have a pair of silver earring hooks, you’d want to pick out a pair of silver premade earrings.
  2. Watermark wikiHow to Attach Earring Hooks
    Pinch the end of this loop with a pair of round- or needle-nosed pliers, then pull upwards or outwards. Open the loop to create a 4mm-wide gap, so you can thread premade earrings onto the hook. If you’re having trouble opening the loop, try using another set of pliers to hold the earring hook in place. [8]
    • For instance, you could use the pliers in your left hand to hold the hook in place, and the pliers in your right hand to open the loop.
  3. Watermark wikiHow to Attach Earring Hooks
    Find the metal loop that’s attached to your earring of choice and thread it onto the earring hook’s open loop. At this point, check that the entire earring is intact so it won’t fall or slip off. [9]
  4. Arrange the open loop between the teeth of the pliers, then squeeze the pliers together. Next, apply an even amount of force so the loop closes completely. Continue squeezing this loop until it’s completely shut, and the earring is securely attached to the hook. [10]
    • If you want, try shaking the earring a little bit to ensure that hook is secure.
  5. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Things You’ll Need

      • Round- or needle-nose pliers

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about making jewelry, check out our in-depth interview with Cory Schifter .

      About This Article

      Thanks to all authors for creating a page that has been read 45,519 times.

      Did this article help you?

      Advertisement