Download Article
Download Article
Aluminum pipe is much easier to bend than aluminum tubing, due to the greater wall thickness, since it is less likely to collapse or deform when you bend it. The thicker material will also require more muscle or the use of a power bender.
Steps
-
Use a manual pipe bender or a hydraulic bender if you have one. You can bend 1 1/4" aluminum conduit by hand, but a manual pipe bender will make it easier. It doesn't matter what you use to bend the pipe, the main thing is how you keep it from collapsing. [1] X Research source
-
Fill the pipe with sand or other material, and secure three layers of window screening, with double hose clamps on the ends. [2] X Research sourceAdvertisement
-
Bend the pipe slowly so that you can watch to make sure it bends evenly and doesn't collapse or deform, and watch for cracks that may occur if the pipe is bent too sharply. [3] X Research source
-
Use whatever means you have to bend the pipe. The pipe will not collapse, but remember that there is a radius to wall thickness / diameter formula that must be observed. A loose rule of thumb is a maximum 3 1/2" radius to 1" diameter ratio. [4] X Research source
-
Consider building dies to bend your pipe if you have the equipment, you can machine your own bending dies for bending the pipe, or you can rent a manual or hydraulic bender for this purpose. [5] X Research source
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- When you use an electricians conduit bender, the head of the bender supports the pipe and helps to prevent distortion while bending. [6] X Research sourceThanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Check the back set or distance from the beginning of the radius to the centerline of the bend to make sure the finished pipe is the right length.Thanks
- Aluminum pipe may crack if you are using an alloy that doesn't have sufficient give for that purpose. [7] X Research sourceThanks
Advertisement
Things You'll Need
- Aluminum pipe
- Sand or other material to fill the pipe
- Conduit bender (optional)
Expert Interview
Thanks for reading our article! If you’d like to learn more about metalworking, check out our in-depth interview with Surekha Krishnan .
References
- ↑ https://www.youtube.com/watch?v=w9GOBXdK11g
- ↑ https://www.youtube.com/watch?v=WPNN46B87mw
- ↑ https://www.youtube.com/watch?v=GEKE9AOdXO4
- ↑ http://www.metalgeek.com/archives/2005/05/01/000047.php
- ↑ https://www.youtube.com/watch?v=3n_lf2RHIPs
- ↑ http://pdf.lowes.com/howtoguides/783250740345_how.pdf
- ↑ https://timberridgedesigns.com/bending-aluminum-tubing-tips-tricks-and-diy-help/
About This Article
Thanks to all authors for creating a page that has been read 149,519 times.
Reader Success Stories
- "Didn't know the difference between tubing and pipe. Good useful info."
Advertisement