PDF download Download Article PDF download Download Article

Patent leather shoes, with their distinctive gleam, make a striking and fun addition to any wardrobe. Modern patent leather shoes get their shine from a thin coating of plastic over the leather. [1] Unfortunately, this plastic finish makes patent leather shoes inflexible and difficult to stretch. [2] Minimize the need for breaking in by buying shoes that fit well and taking a few basic measures to protect your feet. You can stretch your too-tight patent leather shoes a little bit with gentle heat from a hair dryer or with a shoe stretching kit. [3]

Tips to Stretch Patent Leather Shoes

Place a shoe stretcher inside your shoe, then tighten the handle to keep it in place. Leave the stretcher for 24-48 hours and repeat the process until you get enough stretch. Alternatively, stuff your shoe with a rolled-up sock or wadded up newspaper, or take it to a shoe repair professional for a softer stretch.

Method 1
Method 1 of 3:

Making New Shoes More Comfortable

PDF download Download Article
  1. Minimize the need for stretching or breaking in by getting patent leather shoes that are already a good fit for you. Since patent leather is stiff and unforgiving, you're not going to be able to change the fit very much – maybe a quarter of a shoe size, at most. [4] Have yourself fitted for shoes in the store, and try on a few pairs before you buy. [5] Look out for the following when you try on patent leather shoes: [6]
    • Make sure that your toes do not feel squeezed or crushed.
    • Pick a shoe that is comfortable in the heel. The back of the shoe should not rub your heel or slip off when you walk.
    • Make note of how the shoe feels around the ball of your foot. This is the widest part of your foot, so look for a shoe that allows the ball of your foot to sit comfortably.
    • Test out the shoes with the kind of socks you would normally wear with those shoes. Make sure they fit comfortably with your usual socks.
    • Try out the shoes at the end of the day, when you're a little more tired. That way, you'll get a better idea of how it'll feel to be on your feet for a long time and wear the shoes. [7]
  2. You may be tempted to immediately take your new shoes for a night out on the town, but this is a recipe for aching feet. Buy your patent leather shoes in advance of when you plan to wear them, and spend a few days wearing them for short periods at home or at work. [8] Start by wearing them for 10 minutes at a time, and then increase your wear time by another 10 minutes. Keep doing this over several days until you are comfortable wearing (and walking around in) the shoes for a full hour.
    • The total break-in time will depend on a lot of factors, including what kind of material the sole is made of and how well the shoes fit to begin with.
    • Your shoes may take anywhere from a few days to a few weeks to feel comfortable. Shoes with leather soles take longer to break in than shoes with rubber soles.
    • The first time you wear your shoes out, try to keep your wear time to no more than 2-3 hours.
    Advertisement
  3. Thick socks can both stretch the shoes and protect your feet from pinching and blisters as your shoes adjust to your feet (and vice versa). Spend a couple of hours every day wearing your shoes around the house with thick socks. Eventually, the shoes should expand a little and feel more comfortable with regular socks or stockings on. [9]
  4. While you and your shoes are adjusting to each other, you can minimize your discomfort by putting protective coverings on sensitive spots, such as your heels and any corns or bunions. [10] Check your pharmacy or shoe store for products that fit your needs, such as:
    • Blister cushions
    • Bunion pads
    • Adhesive bandages
    • Surgical tape
  5. A lot of shoe-related discomfort is caused by shoes rubbing on your feet. Minimize blisters and friction-related pain by rubbing a little lotion, petroleum jelly, or antiperspirant on your feet before slipping on your shoes. Focus on the spots that tend to get the most irritated. [11]
  6. If your feet start to hurt or develop blisters, give them some time to heal before you wear the shoes again. Consider bringing a comfortable pair of shoes to change into if you have to wear your patent leather shoes for a long stretch of time during the break-in period.
    • It's also a good idea to keep adhesive bandages and blister cushions on you, in case you end up stuck without a change of shoes.
  7. Any time you're not wearing your shoes, put them on a shoe tree. A shoe tree is a foot-shaped device, much like a shoe stretcher. The shoe tree will help maintain your shoe's shape when it is not in use, which is very helpful during the break-in period.
    • Shoe trees are variable in price and design, but tend to cost anywhere from $10 USD to $35 USD.
    • Some shoe trees also function as shoe stretchers.
  8. Advertisement
Method 2
Method 2 of 3:

Stretching Your Shoes with a Hair Dryer

PDF download Download Article
  1. Use some heavy thermal socks, or layer on a few pairs of regular cotton crew socks. The thick socks will help force your shoe open a little wider as you stretch it. [12]
  2. Once the socks are on, squeeze your feet into the shoes you wish to stretch. [13] This may take a bit of effort, but the thick socks will help protect your feet from rubbing and pinching.
  3. With your shoes and socks on, gently pass hot air from a hair dryer over the tight parts of your shoe. Set the dryer on medium heat. [14] Don't do this for more than 20 seconds at a time, since too much heat can damage the leather and the finish. Let your shoes cool down for a bit, and then go over them again. [15] Aim for a total heating time of 2-3 minutes.
  4. While you are applying the heat, flex your feet inside the shoes. Getting the leather moving will help soften it up and make it more pliable. [16]
  5. Don't yank off your shoes as soon as you're done blasting them with hot air. Allowing the shoes to cool with your feet still in them will help them conform to the size and shape of your feet. [17] Walking around while your shoes are cooling can also help loosen up the leather and mold it to your foot.
  6. After you've blasted your shoes with heat a few times and allowed them to cool off, take off your shoes and strip off the extra thick socks. Try your shoes on again with the socks or stockings you would normally wear, and see how they fit. [18] If they still feel a bit tight, repeat the heat treatment. You may need 2-3 treatments to see a difference.
  7. Advertisement
Method 3
Method 3 of 3:

Using a Shoe Stretcher

PDF download Download Article
  1. A ball-and-ring stretcher, which looks a bit like a giant pair of pliers, gives a targeted stretch on one particular part of the shoe (e.g., over a bunion). Put a plastic sandwich bag over your shoe to protect the finish. Insert the ball part of the stretcher into the shoe at the point where you want to stretch it out, and squeeze the stretcher shut. Tighten the clamp on the handles to hold it in place, and leave overnight. [19]
    • Since patent leather shoes are pretty inflexible, you may need to repeat this process several times to get enough stretch.
    • You'll notice a bump on your shoe after you take off the stretcher. As you wear the shoe, this bump will eventually disappear.
    • Ball-and-ring stretchers can be pricey, with less expensive models starting at around $40 USD, and more expensive models running around $70 USD.
  2. Two-way shoe stretchers fit into your shoe like a foot, and can be expanded length- and width-wise. Insert the shoe stretcher into your shoe, and slowly turn the crank to expand the stretcher inside the shoe. Once you have opened up the stretcher to the desired length and width, leave it in the shoe for 24-48 hours. Repeat as needed. [20]
    • Take care not to stretch your shoe too much or too quickly, or you may damage the shoe.
    • Gradually add more stretch by expanding the stretcher with one full turn of the crank once every 8 hours.
    • Two-way shoe stretchers come in a variety of styles, and some can be fitted with “pressure relief pods” to target problem areas. Lower-end models start around $10 USD and more expensive models cost around $50 USD.
  3. If you're afraid that a shoe stretcher might be a bit too harsh on your delicate patent leathers, you can gently expand the inside of your shoe by pushing a rolled-up sock, some wadded up newspaper, or even a foot-sized potato into the toe and leaving it overnight. [21]
    EXPERT TIP

    Mallika Sharma

    Certified Leather Care Technician
    Mallika Sharma is a Certified Leather Care Technician and the Founder of The Leather Laundry, a niche spa service for luxury leather gear in India. Mallika specializes in leather cleaning, coloring, repairing, and restoring for shoes, handbags, jackets, wallets, belts, and sofas. She holds a Master’s degree in Finance and Investment from the University of Edinburgh Business School. Mallika is a certified Professional Leather Care Technician and trained with the globally reputed leather care company, LTT in the United Kingdom.
    Mallika Sharma
    Certified Leather Care Technician

    Stuff leather overnight to break it in. Rather than manually trying to soften and break in extremely stiff, rigid new leather items over a long period of time, you can speed up the break-in process by stuffing leather bags, shoes, or jackets to maximum capacity with tissue paper or air bags overnight. This stretches and loosens up the material. Just avoid overstuffing to the point that stitches or seams may tear.

  4. There are a variety of shoe-stretching sprays and treatments available to condition leather and make it easier to stretch. [22] However, the special plastic finish on patent leather shoes may limit the effectiveness of this treatment. If you choose to try shoe-stretching spray, check the label to make sure the product is safe for use on patent leather.
  5. [23] If you're not confident in your ability to stretch your shoes without damaging them, take them to a shoe repair professional. Someone who is experienced in handling delicate and expensive shoes may have a better idea of how much stretching your shoes can take, and what techniques will work best to get the desired result. [24]
  6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What can I do to speed up breaking in my new leather shoes?
    Marc Sigal
    Shoe Care Specialist
    Marc Sigal is a Shoe Care Specialist based in Los Angeles. Marc has over 19 years of experience working in the world of e-commerce, with extensive experience with the care of luxury goods. He is currently the VP of Strategic Partnerships at Blutag, an e-commerce platform helping consumers find products. Prior to Blutag, he founded ButlerBox, a dry cleaning and shoe care service based in Los Angeles, California. ButlerBox reinvented amenity services by placing custom-designed, wrinkle-resistant lockers in luxury apartment buildings, class A office buildings, shopping centers, and other convenient locations. The company got acquired by Rinse.com in 2021. Marc has a BA in Global and International Studies from the University of California, Santa Barbara.
    Shoe Care Specialist
    Expert Answer
    Try lacing the laces a little differently. If you keep them laced the way they came, the shoes kind of get used to it that way. If you switch them up, it will help bend the leather a little bit more and break them in. You can also use your hands and just bend the shoes in the direction that they should be going in.
  • Question
    What can I do with my Nikes? It's broken on my small toe, and it's a leather white Nike.
    Community Answer
    If your shoe has a break in the leather or in the finish, your best bet is to take it to a shoe repair professional. Depending on the nature of the damage, they may recommend replacing the damaged shoe.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      Things You'll Need

      • Thick socks
      • Blister cushions, surgical tape, or other protective foot covering
      • Lotion, petroleum jelly, or antiperspirant
      • Hair dryer
      • Shoe tree
      • Shoe stretcher

      References

      1. https://theidleman.com/manual/advice/wear-patent-leather-shoes/
      2. https://fashionista.com/2014/12/buying-small-shoes
      3. Marc Sigal. Shoe Care Specialist. Expert Interview. 15 January 2020.
      4. https://fashionista.com/2014/12/buying-small-shoes
      5. Penny Simmons. Shoe Care Specialist. Expert Interview. 19 November 2020.
      6. https://www.businessinsider.com/how-to-tell-if-shoes-fit-2013-12
      7. Penny Simmons. Shoe Care Specialist. Expert Interview. 19 November 2020.
      8. Marc Sigal. Shoe Care Specialist. Expert Interview. 15 January 2020.
      9. https://verilymag.com/2016/06/how-to-break-in-shoes-blisters-new-shoes

      About This Article

      Article Summary X

      To break in patent leather shoes using a hair dryer, start by putting on a pair of thick socks to help stretch out the shoes and protect your feet from rubbing and pinching. Next, put on the shoes and use a hair dryer to blow hot air onto them for 20 seconds as you move and stretch your feet. Then, let them cool down for 5 seconds to prevent damage to the leather and the finish. Continue the heating and cooling process for up to 3 minutes. Finally, walk around while the shoes cool down to help them conform to the size and shape of your feet. To learn more, including how to minimize discomfort on sensitive spots like your heels and bunions, read on.

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 141,971 times.

      Reader Success Stories

      • Susy Whisenant

        Apr 27, 2019

        "Thank you so much for the information. I have patent leather shoes, and I had no idea how to make them a little ..." more
      Share your story

      Did this article help you?

      Advertisement