How to Build a Popsicle Stick Tower

PDF download Download Article
PDF download Download Article

Popsicle stick towers are a common engineering project to be assigned in school. Your assignment may have various criteria for height, weight, and number of popsicles, but this guide will give you a general idea of how to construct a sturdy tower out of just popsicle sticks and wood glue. This project is fun and relatively easy to do. When you are finished with your construction, add weight on top to see how much it can hold.

Part 1
Part 1 of 3:

Making the Basic Squares

PDF download Download Article
  1. Lay out four popsicle sticks in a square with the horizontal sticks on the bottom and the vertical sticks laying on top. You want the sticks to be evenly spaced apart so they make a perfect square. Using one popsicle stick as a measuring device, make sure each stick is one “popsicle stick width” from the edge. [1]
    • To make your tower as sturdy as possible, use wood glue instead of the basic white tacky glue.
    • Each layer of the tower will be made up of four basic squares, so each layer will use 20 popsicle sticks.
    • Lay two sticks vertically side-by-side across the two horizontal sticks to get the proper spacing.
    • To align the sticks together, use a straight edge such as a block of wood or a brick.
  2. Watermark wikiHow to Build a Popsicle Stick Tower
    Lift one end of a vertical stick and place a dab of glue underneath. Press the two sticks together. Repeat this with the other side of the popsicle stick and then two more times with the other vertical stick. At this point, you should have a basic four popsicle stick square glued together. [2]
    • Take care to maintain the accuracy of the square. This will be important when gluing the “floors” of the tower together. Make each module as square and regular as possible.
    • Use a heavy weight such as a brick or textbook and lay on top of the glued joints to keep them flat while the glue dries.
    • If the square gets bumped out of alignment, simply move the sticks back into proper placement.
    • If the sticks dry out of alignment, you can carefully cut them apart with a knife and re-glue them or just make a new square.
    Advertisement
  3. Before continuing on to the next step, you want to let the glue dry. Follow the instructions listed on the bottle of glue you are using. The glue does not need to be completely dry, but you want to make sure it has set enough that the sticks will not move as you handle the square.
    • Leave the square under the heavy weight for at least 15 minutes before moving onto the next step.
  4. Watermark wikiHow to Build a Popsicle Stick Tower
    Place a popsicle stick diagonally on the “inside” of the square. The “inside” means the brace will be between the two vertical sticks and glued to the horizontal sticks. Place a small dab of glue at each end and glue the brace in place. The brace is essential stabilizing the structure and allowing it to hold more weight.
    • Put weight on top of the whole piece and wait about 15 minutes for the brace to dry.
    • Try to glue the brace in the same place on each square.
  5. Watermark wikiHow to Build a Popsicle Stick Tower
    Starting with four new sticks, lay them out in a square and glue them together. After letting the glue set, add the brace to finish. Make enough squares to build your entire tower.
    • If you want five floors in your tower you will need 20 squares.
    • You will get better and better at building the boxes as you go along. Some of your earlier boxes may be "less precise", so if you have unlimited popsicle sticks, you may consider building additional boxes and discard some of the first attempts.
    6. Advertisement
Part 2
Part 2 of 3:

Joining the Squares into One Floor

PDF download Download Article
  1. Place one side with the cross brace facing out flat on a table. Slide a second square against the outside of the first piece so that it is sticking up. Slide the third square on the opposite side of the square. [3]
    • It might be easier to place the first square on a raised platform so you can easily slide the other sides under it.
    • Opposite sides should have braces going in opposite directions.
  2. Watermark wikiHow to Build a Popsicle Stick Tower
    Liberally apply glue at each corner to attach the sides together. Let the glue sit for at least 15 minutes to set before you try to glue the final side on. Place books or weights against each side to hold everything in place while it dries. [4]
    • While the glue is setting, you can start assembling other squares or cubes.
    • You may need to hold the two pieces together, allowing the glue to set a bit before you place the books/weights to hold it in place.
  3. Watermark wikiHow to Build a Popsicle Stick Tower
    Once the glue has set, you can attach the final side to the cube. Slide the side over the edges of the sticks and make sure that the brace is facing the opposite direction of the side opposite it. Apply enough glue to ensure a firm seal of the joint.
    • Wait for everything to dry. Continue to assemble other components while waiting for glue to set.
    • Again, you may need to hold the fourth wall in place to let the glue set so the cube will be formed properly.
  4. Repeat this whole process assembling four squares into a cube until you have enough cubes to build the tower as high as you want. Set up multiple work stations so you can build more than one cube at a time.
    • Each cube takes four sides, so if you want to build a tower with five floors, you will need a total of 20 sides.
    • While your forming the cubes, try stacking them on top of each other and make sure they align properly. If they don’t, either break the cubes apart and remake them, or start with a fresh set of squares and make a new cube.
    5. Advertisement
Part 3
Part 3 of 3:

Assembling the Floors into a Tower

PDF download Download Article
  1. Stack a second cube on top of the first one so that the middle brace is going in the opposite direction of the side it’s stacked on top of. The tips of the popsicle sticks can overlap to give you a better position for gluing. [5]
    • The vertical sticks should be resting directly on top of the horizontal sticks.
    • Your cubes should fit together pretty well. If you have to work them together a little bit, the tower will still work, it just won’t be as sturdy. If you have to force them to fit together, the tower will lose structural integrity.
  2. Watermark wikiHow to Build a Popsicle Stick Tower
    Using the same wood glue used to assemble the other pieces, glue the joints of the cube together. Be generous with the glue to make a sturdier tower. If the squares have been properly constructed, they should fit together nicely.
    • If the cubes don’t sit nicely on top of each other, you may consider making a new cube so they stack properly. Uneven stacked cubes will not be as sturdy.
  3. Use clothespins or workbench clamps and attach the clips to hold the two cubes together. Clip them on in such a way that they hold the joints together, but are not touching the glue.
    • Wait for everything to dry before removing the clamps and adding another cube to the tower.
  4. Add another cube to the top of the tower making sure to alternate the direction of the diagonal cross beam for each level. Alternating the cross braces adds another level of structural integrity to the tower. Glue and clip each level to ensure strong bonding between the levels. [6]
    • When you glue the last cube on top, your tower is finished!
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What could cause the tower to fall?
    Community Answer
    The tower could fall if the glue is not strong enough or is still wet and dripping. The weight of the popsicle sticks, especially if the balance is off, can also cause the tower to fall.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 63 Helpful 155
  • Question
    Can it hold text books on top?
    Community Answer
    Yes, the tower will withstand the weight of several textbooks if constructed properly.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 79 Helpful 186
  • Question
    Why are popsicle sticks good for making a tower?
    Community Answer
    Popsicle sticks have good structural integrity, like bricks.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 53 Helpful 110
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Give yourself plenty of time to build the tower. Glue takes a long time to dry. Depending on your work area, maybe only a few modules can be under construction at a time. You also want a day or so for the final gluing to completely cure.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • 100-200 popsicle sticks (depends on the height of tower and having more may allow for "practice")
      • Rock slabs, bricks, or flat weights like heavy textbooks
      • Fresh wood glue
      • Clamps (clothes pins work well)
      • A clean flat building surface that can withstand glue drips etc.


      You Might Also Like

      How to
      Make Shrinky Dinks
      How to
      Build a Bridge with Popsicle Sticks
      4 DIY Methods to Make an Awesome Toy Car with Recycled Materials
      How to
      Build a Popsicle House
      How to
      Make a Cardboard Car
      How to
      Make Pipe Cleaner Flowers
      How to
      Make a Paper Tree for Kids
      How to
      Make a Pipe Cleaner Reindeer
      How to
      Harden and Preserve Sand Dollars
      How to
      Make Homemade Chalk
      How to
      Make Potions (for Small Kids)
      How to
      Care for Your Pet Rock
      How to
      Make a Bouncy Ball (Without Borax)
      How to
      Make a Pinwheel
      Advertisement

      References

      1. ↑ http://philliphansel.org/popsicletower/
      2. ↑ http://philliphansel.org/popsicletower/
      3. ↑ http://philliphansel.org/popsicletower/
      4. ↑ http://philliphansel.org/popsicletower/
      5. ↑ http://philliphansel.org/popsicletower/
      6. ↑ http://philliphansel.org/popsicletower/

      About This Article

      Article Summary X

      One way to build a popsicle stick tower is by stacking the popsicle sticks in cubes. Start by gluing 4 popsicle sticks into a square with a diagonal support between two corners. If you want to build a tower that is 5 cubes high, you’ll need 20 squares. Glue the first square into a cube without a top, and the following squares into cubes without tops or bottoms. Then, stack the cubes on top of each other, gluing them in the corners where they meet. Secure them with clothespins while the glue dries. If you want to learn how to stack more cubes on top of your tower, keep reading the article!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 537,278 times.

      Reader Success Stories

      • Anonymous

        May 7, 2018

        "I had no idea what to do for a school project but this article really helped me. Although, I haven't actually ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement