How to Find Partial Pressure

PDF download Download Article
Determining the pressure of each gas in a mixture
PDF download Download Article

In chemistry, “partial pressure” refers to the pressure that each gas in a gas mixture exerts against its surroundings, such as a sample flask, a diver’s air tank, or the boundary of an atmosphere. You can calculate the pressure of each gas in a mixture if you know how much of it there is, what volume it takes up, and its temperature. You can then add these partial pressures together to find the total pressure of the gas mixture, or, you can find the total pressure first and then find the partial pressures.

Part 1
Part 1 of 3:

Understanding the Properties of Gases

PDF download Download Article
  1. An ideal gas, in chemistry, is one that interacts with other gases without being attracted to their molecules. Individual molecules may strike one another and bounce off like billiard balls without being deformed in any way. [1]
    • The pressures of ideal gases increase as they are squeezed into smaller spaces and decrease as they expand into larger areas. This relationship is called Boyle’s Law, after Robert Boyle. It is written mathematically as k = P x V or, more simply, k = PV, where k represents the constant relationship, P represents pressure and V represents volume. [2]
    • Pressures may be given using one of several possible units. One is the pascal (Pa), defined as a force of one newton applied over a square meter. Another is the atmosphere (atm), defined as the pressure of Earth’s atmosphere at sea level. A pressure of 1 atm is equal to 101,325 Pa. [3]
    • The temperatures of ideal gases increase as their volumes increase and decrease as their volumes decrease. This relationship is called Charle’s Law after Jacques Charles. It is written mathematically as k = V / T, where k represents the constant relationship between the volume and temperature, V again represents the volume, and T represents temperature. [4]
    • Temperatures for gases in this equation are given in degrees Kelvin, which are found by adding 273 to the number of degrees Celsius in the gas’ temperature.
    • These two relationships can be combined into a single equation: k = PV / T, which can also be written as PV = kT.
  2. Gases have both mass and volume. Volume is usually measured in liters (l), but there are two kinds of mass. [5]
    • Conventional mass is measured in grams or, if there is a sufficiently large mass, kilograms.
    • Because of how lightweight gases usually are, they are also measured with another form of mass called molecular mass or molar mass. Molar mass is defined as the sum of the atomic weights of each atom in the compound the gas is composed of, with each atom compared against the standard value of 12 for carbon’s molar mass.
    • Because atoms and molecules are too small to work with, quantities of gases are defined in moles. The number of moles present in a given gas can be found by dividing the mass by the molar mass and can be represented by the letter n.
    • We can replace the arbitrary k constant in the gas equation with the product of n, the number of moles (mol), and a new constant R. The equation can now be written nR = PV/T or PV = nRT.
    • The value of R depends on the units used to measure the gases’ pressures, volumes, and temperatures. For volume in liters, temperature in degrees Kelvin, and pressure in atmospheres, its value is 0.0821 L atm/K mol. This may also be written 0.0821 L atm K -1 mol -1 to avoid using the division slash with units of measure.
    Advertisement
  3. Developed by chemist and physicist John Dalton, who first advanced the concept of chemical elements being made up of atoms, Dalton’s Law states that the total pressure of a gas mixture is the sum of the pressures of each of the gases in the mixture. [6]
    • Dalton’s Law can be written in equation form as P total = P 1 + P 2 + P 3 … with as many addends after the equal sign as there are gases in the mixture.
    • The Dalton’s Law equation can be expanded on when working with gases whose individual partial pressures are unknown, but for which we do know their volumes and temperatures. A gas’ partial pressure is the same pressure as if the same quantity of that gas were the only gas in the container.
    • For each of the partial pressures, we can rewrite the ideal gas equation so that instead of the form PV = nRT, we can have only P on the left side of the equal sign. To do this, we divide both sides by V: PV/V = nRT/V. The two V’s on the left side cancel out, leaving P = nRT/V.
    • We can then substitute for each subscripted P on the right side of the partial pressures equation: P total =(nRT/V) 1 + (nRT/V) 2 + (nRT/V) 3 …
    4. Advertisement
Part 2
Part 2 of 3:

Calculating Partial, Then Total Pressures

PDF download Download Article
  1. For the purposes of this calculation, we’ll assume a 2-liter flask holds 3 gases: nitrogen (N 2 ), oxygen (O 2 ), and carbon dioxide (CO 2 ). There are 10g of each gas, and the temperature of each gas in the flask is 37 degrees C (98.6 degrees F). We need to find the partial pressure for each gas, and the total pressure the gas mixture exerts in the container.
    • Our partial pressure equation becomes P total = P nitrogen + P oxygen + P carbon dioxide .
    • Since we’re trying to find the pressure each gas exerts, we know the volume and temperature, and we can find how many moles of each gas is present based on the mass, we can rewrite this equation as : P total =(nRT/V) nitrogen + (nRT/V) oxygen + (nRT/V) carbon dioxide
  2. The Celsius temperature is 37 degrees, so we add 273 to 37 to get 310 degrees K. [7]
  3. The number of moles of a gas is the mass of that gas divided by its molar mass, which we said was the sum of the atomic weights of each atom in the compound. [8]
    • For our first gas, nitrogen (N 2 ), each atom has an atomic weight of 14. Because the nitrogen is diatomic (forms two-atom molecules), we have to multiply 14 by 2 to find that the nitrogen in our sample has a molar mass of 28. We then divide the mass in grams, 10 g, by 28, to get the number of moles, which we’ll approximate as 0.4 mol of nitrogen when rounding to the nearest tenth.
    • For our second gas, oxygen (O 2 ), each atom has an atomic weight of 16. Oxygen is also diatomic, so we multiply 16 by 2 to find the oxygen in our sample has a molar mass of 32. Dividing 10 g by 32 gives us approximately 0.3 mol of oxygen in our sample.
    • Our third gas, carbon dioxide (CO 2 ), has 3 atoms: one of carbon, with an atomic weight of 12; and two of oxygen, each with an atomic weight of 16. We add the three weights: 12 + 16 + 16 = 44 as the molar mass. Dividing 10 g by 44 gives us approximately 0.2 mol of carbon dioxide.
  4. Our equation now looks like this: [9] P total =(0.4 * R * 310/2) nitrogen + (0.3 *R * 310/2) oxygen + (0.2 * R *310/2) carbon dioxide .
    • For simplicity’s sake, we’ve left out the units of measure accompanying the values. These units will cancel out after we do the math, leaving only the unit of measure we’re using to report the pressures in.
  5. We’ll report the partial and total pressures in atmospheres, so we’ll use the value for R of 0.0821 L atm/K mol. Plugging this value into the equation now gives us P total =(0.4 * 0.0821 * 310/2) nitrogen + (0.3 *0.0821 * 310/2) oxygen + (0.2 * 0.0821 * 310/2) carbon dioxide . [10]
  6. Now that we have the values in place, it’s time to do the math. [11]
    • For the partial pressure of nitrogen, we multiply 0.4 mol by our constant of 0.0821 and our temperature of 310 degrees K, then divide by 2 liters: 0.4 * 0.0821 * 310/2 = 5.09 atm, approximately.
    • For the partial pressure of oxygen, we multiply 0.3 mol by our constant of 0.0821 and our temperature of 310 degrees K, then divide by 2 liters: 0.3 *0.0821 * 310/2 = 3.82 atm, approximately.
    • For the partial pressure of carbon dioxide, we multiply 0.2 mol by our constant of 0.0821 and our temperature of 310 degrees K, then divide by 2 liters: 0.2 * 0.0821 * 310/2 = 2.54 atm, approximately.
    • We now add these pressures to find the total pressure: P total = 5.09 + 3.82 + 2.54, or 11.45 atm, approximately.
    7. Advertisement
Part 3
Part 3 of 3:

Calculating Total, then Partial Pressures

PDF download Download Article
  1. Again, we’ll assume a 2-liter flask holding 3 gases: nitrogen (N 2 ), oxygen (O 2 ), and carbon dioxide (CO 2 ). There are 10g of each gas, and the temperature of each gas in the flask is 37 degrees C (98.6 degrees F).
    • The Kelvin temperature will still be 310 degrees, and, as before, we have approximately 0.4 mol of nitrogen, 0.3 mol of oxygen, and 0.2 mol of carbon dioxide.
    • Likewise, we’ll still report the pressures in atmospheres, so we’ll use the value of 0.0821 L atm/K mol for the R constant.
    • Thus, our partial pressures equation still looks the same at this point: P total =(0.4 * 0.0821 * 310/2) nitrogen + (0.3 *0.0821 * 310/2) oxygen + (0.2 * 0.0821 * 310/2) carbon dioxide .
  2. Because the volume and temperature are the same for each sample in the gas, not to mention each molar value is multiplied by the same constant, we can use the distributive property of mathematics to rewrite the equation as P total = (0.4 + 0.3 + 0.2) * 0.0821 * 310/2.
    • Adding 0.4 + 0.3 + 0.2 = 0.9 mol of gas mixture. This further simplifies the equation to P total = 0.9 * 0.0821 * 310/2.
  3. Multiplying 0.9 * 0.0821 * 310/2 = 11.45 mol, approximately. [12]
  4. To do this, divide the number of moles of each gas into the total number of moles. [13]
    • There are 0.4 mol of nitrogen, so 0.4/0.9 = 0.44 (44 percent) of the sample, approximately.
    • There are 0.3 mol of nitrogen, so 0.3/0.9 = 0.33 (33 percent) of the sample, approximately.
    • There are 0.2 mol of carbon dioxide, so 0.2/0.9 = 0.22 (22 percent) of the sample, approximately.
    • While the above approximate percentages add to only 0.99, the actual decimals are repeating, so the sum would actual be a repeating series of 9s after the decimal. By definition, this is the same as 1, or 100 percent.
  5. [14]
    • Multiplying 0.44 * 11.45 = 5.04 atm, approximately.
    • Multiplying 0.33 * 11.45 = 3.78 atm, approximately.
    • Multiplying 0.22 * 11.45 = 2.52 atm, approximately.
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I calculate the pressure before the solution was made?
    Bess Ruff, MA
    Environmental Scientist
    Bess Ruff is a Geography PhD student at Florida State University. She received her MA in Environmental Science and Management from the University of California, Santa Barbara in 2016. She has conducted survey work for marine spatial planning projects in the Caribbean and provided research support as a graduate fellow for the Sustainable Fisheries Group.
    Bess Ruff, MA
    Environmental Scientist
    Expert Answer
    If you know the volume of a gas and the relationship the volume of that gas has with pressure then you can calculate initial pressure (i.e. the pressure before the solution was made) using the equation for Boyle's Law included in the article.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 5
  • Question
    What is a partial pressure of oxygen in a container that contains 2.0 mol of oxygen, 3.0 mol of nitrogen, and 1.0 mol of carbon dioxide when the total pressure is 900 Torr?
    Community Answer
    Use the law of partial pressures (P_total = P_O + P_N + P_CO2) along with the ideal gas law, PV = nRT.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 21 Helpful 54
  • Question
    How many molecules are there in a 3.46 gram sample of hydrogen chloride?
    Community Answer
    Hydrogen chloride is composed of one atom of hydrogen and one atom of chlorine. You can find the molar mass of HCl by adding the molar masses of hydrogen and chlorine, this will give you how many moles of HCl there are per gram. Use this to convert from grams to moles.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 10 Helpful 14
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • You’ll notice a slight difference in the values from finding the partial pressures first, then the total pressure and from finding the total pressure first, then the partial pressures. Remember that the values given were stated as approximate values, due to rounding to either 1 or 2 decimal places to make the values easier to understand. If you work out the calculations yourself with a calculator without rounding, you’ll notice either a smaller discrepancy between the two methods or none at all.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Knowledge of partial pressures of gases can become a matter of life or death for divers. Too low a partial pressure of oxygen can lead to unconsciousness and death, while too high a partial pressure of either nitrogen or oxygen can also be toxic. [15]
        Thanks
        Helpful 1 Not Helpful 0
      Advertisement

      Things You’ll Need

      • Calculator
      • Reference book of atomic weights/molar masses

      You Might Also Like

      How to
      Calculate the Concentration of a Solution
      How to
      Calculate Theoretical Yield
      How to
      Calculate Molarity: Easy Step-by-Step Guide
      How to
      Calculate Electronegativity
      How to
      Calculate Vapor Pressure
      How to
      Calculate the Enthalpy of a Chemical Reaction
      How to
      Calculate Molar Mass
      How to
      Calculate Bond Order in Chemistry
      How to
      Calculate Percent Yield in Chemistry
      How to
      Calculate Molar Absorptivity
      How to
      Calculate Average Atomic Mass (and Use the Result)
      How to
      Calculate Atomic Mass
      How to
      Calculate Bond Energy
      How to
      Convert Grams to Moles
      Advertisement

      References

      1. ↑ https://www.khanacademy.org/science/physics/thermodynamics/temp-kinetic-theory-ideal-gas-law/a/what-is-the-ideal-gas-law
      2. ↑ https://www1.grc.nasa.gov/beginners-guide-to-aeronautics/boyles-law/
      3. ↑ https://openstax.org/books/chemistry-2e/pages/9-1-gas-pressure
      4. ↑ https://www.chm.davidson.edu/vce/gaslaws/charleslaw.html
      5. ↑ https://chem.libretexts.org/Courses/can/intro/11%3A_Gases/11.09%3A_The_Ideal_Gas_Law%3A_Pressure_Volume_Temperature_and_Moles
      6. ↑ https://www.khanacademy.org/science/chemistry/gases-and-kinetic-molecular-theory/ideal-gas-laws/a/daltons-law-of-partial-pressure
      7. ↑ https://www.rapidtables.com/convert/temperature/celsius-to-kelvin.html
      8. ↑ https://www.khanacademy.org/science/chemistry/gases-and-kinetic-molecular-theory/ideal-gas-laws/a/daltons-law-of-partial-pressure
      9. ↑ https://www.omnicalculator.com/chemistry/partial-pressure
      1. ↑ https://chem.libretexts.org/Courses/can/intro/11%3A_Gases/11.09%3A_The_Ideal_Gas_Law%3A_Pressure_Volume_Temperature_and_Moles
      2. ↑ https://www.omnicalculator.com/chemistry/partial-pressure
      3. ↑ https://www.omnicalculator.com/chemistry/partial-pressure
      4. ↑ https://www.omnicalculator.com/chemistry/partial-pressure
      5. ↑ https://www.omnicalculator.com/chemistry/partial-pressure
      6. ↑ https://www.msdmanuals.com/home/injuries-and-poisoning/diving-and-compressed-air-injuries/gas-toxicity-during-diving

      About This Article

      Article Summary X

      To calculate partial pressure, start by applying the equation k = PV to treat the gas as an ideal gas according to Boyle's law. Then, convert the equation into Kelvin, if it isn't already, by adding 273 to the temperature in Celsius. After you've done that, begin finding the partial pressure of each gas by using the formula P = nRT/V. If there is more than 1 gas, you should use Dalton's law of partial pressures by plugging in the partial pressure of each gas into the equation Ptotal = P1 + P2 + P3. To learn how to find partial pressure by finding the total pressure first, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 422,872 times.

      Reader Success Stories

      • Anonymous

        Sep 29, 2017

        "I like how it's easy to understand with all the diagrams implemented."
      Share your story

      Did this article help you?

      Advertisement