Download Article
Download Article
Ever wonder why skydivers eventually reach a maximum speed when falling, even though the force of gravity in a vacuum will cause an object to continually accelerate? A falling object will reach a constant speed when there is a restraining force, such as drag from the air. The force applied by gravity near to a massive body is mostly constant, but forces like air resistance increase the faster the falling object goes. If allowed to free fall for long enough, a falling object will reach a speed where the force of the drag will become equal the force of gravity, and the two will cancel each other out, causing the object to fall at that same speed until it hits the ground. This is called terminal velocity.
Steps
-
Find the mass of the falling object. This should be measured in grams or kilograms, in the metric system. [3] X Research source
- If you are using the imperial system, remember that pounds is not actually a unit of mass, but of force. The unit of mass in the imperial system is the pound-mass (lbm), which under the gravitational force on the surface of the earth would experience a force of 32 pound-force (lbf). For example, if a person weighs 160 pounds on earth, that person is actually feeling 160 lbf, but their mass is 5 lbm.
-
Know the acceleration due to the gravity of the Earth. [4] X Expert Source Sean Alexander, MS
Physics Tutor Expert Interview. 14 May 2020. Close enough to the earth to encounter air resistance, this acceleration is 9.8 meters per second squared, or 32 feet per second squared. [5] X Research source -
Calculate the downward pull of gravity. The force with which the falling object is being pulled down equals the object's mass times acceleration due to gravity, or F = MA. This number, multiplied by two, goes in the top of the terminal velocity formula.
- In the imperial system, this is the lbf of the object, the number that is commonly called weight. It is more properly the mass in lbm times 32 feet per second squared. In the metric system, the force is the mass in grams times 9.8 meters per second squared.
Advertisement
-
Get the density of the medium. For an object falling through the Earth's atmosphere, the density is going to change based on the altitude and the temperature of the air. This makes calculating terminal velocity of a falling object especially difficult, as the density of the air will change as the object loses altitude. However, you can look up approximate air densities in textbooks and other references. [6] X Research source
- As a rough guide, the density of air at sea level when the temperature is 15 °C is 1.225 kg/m3.
-
Estimate the drag coefficient of the object. This number is based on how streamlined the object is. Unfortunately it is a very complex number to compute, and involves making certain scientific assumptions. Do not attempt to calculate drag coefficient yourself without the help of a wind tunnel and some serious aerodynamic math. Instead look up an approximation based on a similarly shaped object. [7] X Research source
-
Calculate the projected area of the object. The last variable you need to know is the sectional area being presented by the object to the medium. Imagine the silhouette of the falling object seeing when looking up from directly beneath it. That shape, projected onto a plane, is the projected area. Again, this is a difficult value to calculate with anything but simple geometric objects. [8] X Research source
-
Figure out the drag force that is opposing the downward pull of gravity. If you know the velocity of the object, but not the drag force, you can use the formula to calculate the drag force. [9] X Research source This is (C*ρ*A*(v^2))/2.
Advertisement
Community Q&A
Search
-
QuestionIf the drop is falling freely with the terminal velocity, then what will happen?Community AnswerIt will continue to fall at that speed without accelerating until it hits something.
-
QuestionWhat is base jumping?Community AnswerB.A.S.E is an acronym for Buildings, Antennas, Spans, and Earth. BASE jumping is an extreme sport in which you jump off these various forms and deploy a small parachute.
-
QuestionWhat speed is terminal velocity?Ben HalfordCommunity AnswerDepends on the weight, shape, and density of the air. Hence, you have a way to calculate it, as it is not a constant.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Without an open parachute, a skydiver would strike the ground at about 130 mph (210 km/h).Thanks
- Terminal velocity will actually change slightly during the free fall. Gravity goes up slightly as the object gets closer to the center of the earth, but the amount is negligible. Density of the medium will rise as the object gets down deeper into the medium. This is a much more noticeable effect. A skydiver will actually slow down as the fall proceeds because the atmosphere gets increasingly thick as altitude drops.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
References
- ↑ https://www.omnicalculator.com/physics/terminal-velocity
- ↑ http://www.engineeringtoolbox.com/drag-coefficient-d_627.html
- ↑ https://www.physicsclassroom.com/class/newtlaws/Lesson-3/Free-Fall-and-Air-Resistance
- ↑ Sean Alexander, MS. Physics Tutor. Expert Interview. 14 May 2020.
- ↑ https://www.physicsclassroom.com/class/1DKin/Lesson-5/Acceleration-of-Gravity
- ↑ http://wahiduddin.net/calc/density_altitude.htm
- ↑ https://phys.libretexts.org/Courses/Joliet_Junior_College/Physics_201_-_Fall_2019/Book%3A_Physics_(Boundless)/6%3A_Applications_of_Newton/6.07%3A_Drag_Force_and_Terminal_Speed
- ↑ https://www.omnicalculator.com/physics/drag-equation
- ↑ https://courses.lumenlearning.com/suny-physics/chapter/5-2-drag-forces/
About This Article
Article Summary
X
To calculate terminal velocity, start by multiplying the mass of the object by 2. Then, multiply that number by the acceleration of the object due to gravity and write your answer down. Next, multiply the density of the fluid the object is falling through by the projected area of the object. Then, multiply that number by the drag coefficient. Finally, divide your first answer by your second answer and take the square root of that number to find the terminal velocity. To learn how to find gravitational force and drag force, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 674,499 times.
Reader Success Stories
- "Amazing article, it was very informative and I don't think there is much out there that can be as useful as this website and their articles." ..." more
Advertisement
"Amazing article, it was very informative and I don't think there is much out there that can be as useful as this website and their articles."
..."
more
"Yes, because I needed this information very badly and now I have it. Thank you!"
