Download Article
Download Article
A surfboard on the roof of a car can act like the wing of an airplane. G-force, lift and drag all come into play. A board flying off a vehicle can become a deadly missile.
Steps
-
Securely attach racks to the vehicle. If the racks are so-called "soft racks," they should consist of more than just a web strap that wraps around the vehicle.
-
Straps that wrap around the rack and surfboard must be inspected for worn or weak spots. Buckles on the straps should be the cam-spring type and not d-ring style. No-Rust zinc buckles are preferred.Advertisement
-
Place the surfboard with the fin(s) up and forward on the rack. This reduces "lift" and the surfboard fins will act as a "stop" to prevent the board from sliding backwards off the rack.
-
Wrap the straps through the side-rails (around the cross-bars) of the rack and over the top of the surfboard(s) then around the cross-bars on the other side. Make sure the strap buckle is not on the rail of the surfboard. Each strap should cross the board twice. Repeat for other cross-bar. [1] X Research source
-
Give the board a solid "shake" to make sure the board will not shift in the rack. [2] X Research source
-
Always tie-off excess strap. Never let it flap in the wind.
-
Be careful not to over-tighten straps as this can damage surfboards. [3] X Research source
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Check tightness regularly if driving any long distance. If stacking boards, be careful not to ding the tail of the top board with the fin of the bottom board. Pay attention to rockers as to not ding the bottom deck of one with the nose of another. DO NOT speed!Thanks
- Remove leashes from boards before placing them in racks.Thanks
- A half-twist in the strap will prevent strap hum.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Always place your board fins up on the rack.Thanks
- Never, never put unsecured boards in the bed of a truck.Thanks
- A surfboard creates its own lift.Thanks
Advertisement
Things You'll Need
- Strong roof racks
- Secure poly webbing straps with Zinc Buckles and buckle pads
References
About This Article
Thanks to all authors for creating a page that has been read 169,146 times.
Advertisement