How to Carve a Coconut Shell

PDF download Download Article
PDF download Download Article

While you might think a coconut shell is best used to hold a cool drink, you can also use it to make beautiful carvings! Coconut carvings are incredibly popular in certain parts of the world, like China and India, and you can use this traditional practice to make lovely decorative pieces. While there are lots of things you can make from a coconut shell, the easiest is a bowl, so we’ll walk you through that process.

Part 1
Part 1 of 2:

Shell Prep and Sanding

PDF download Download Article
  1. The beautiful thing about using a coconut shell to make a bowl is that you can make a bowl of any size. For a smaller bowl, simply pick a smaller coconut. For a larger bowl, grab a bigger one. [1]
    • If there are cracks, they’ll just get larger and more pronounced as you smooth and sand the shell.
  2. Watermark wikiHow to Carve a Coconut Shell
    Grab a bowl, a cutting board, a hammer, and a screwdriver. Tap the screwdriver through the eyes of the coconut and drain the liquid into the bowl. Then, strike the coconut with the hammer all the way around its hemisphere until a crack starts to form. Keep hammering the coconut until the crack is large enough for you to pull the coconut apart. [2]
    • The great thing about making bowls is that you can get 2 out of each coconut. One of the halves will have holes in it from where you pierced through the eyes, but you can incorporate those into the bowl's design.
    Advertisement
  3. Watermark wikiHow to Carve a Coconut Shell
    This sounds harder than it is! Wedge a butter knife between the shell and the coconut meat and wiggle it back and forth until the meat begins to come away from the shell. It might take a while to do the entire coconut, but it’s an essential part of the process. [3]
    • Be careful while doing this. Try holding the coconut shell in your non-dominant hand so you can wield the butter knife with more control.
  4. Watermark wikiHow to Carve a Coconut Shell
    If possible, attach a sanding flap wheel to a drill to make the process go faster—it can take quite a while to sand the shell down by hand. [4] Make sure to wear a dust mask and gloves while you work! [5] If you don’t have a drill and sanding flap wheel, a few other alternatives are listed below for you:
    • Use a hand sander to protect your hands from the sandpaper’s grit. [6]
    • Rub the exterior of the shell with steel wool if you don’t have sandpaper.
    • Use a lathe and sanding attachment for an even quicker process. [7]
  5. Hold the shell in a gloved hand so that if the sandpaper slips, it won’t rough up your skin. Since you already used 80-grit sandpaper, move on to something higher, like 100-grit for the first pass-over. Continue using finer and finer grits of sandpaper until ending at 240-grit. [8]
    • For example, you could go from 100-grit to 120-grit to 240-grit.
    • The goal is to expose the smooth, polished shell beneath the fibrous exterior.
  6. Watermark wikiHow to Carve a Coconut Shell
    The edge of your coconut shell might not be completely even and might have a few jagged sections. Place a piece of 40-grit sandpaper on your workstation, place the shell cut-side-down on it, and rub it back and forth until the edge is smooth to the touch. [9]
    • This process makes your bowls look much more professional and polished once they’re done.
    7. Advertisement
Part 2
Part 2 of 2:

Designs and Finishes

PDF download Download Article
  1. You can always freestyle your carvings, but if you want something intricate, it’s best to follow an outline. Use a pencil or pen—basically anything that will be visible without permanently marring the shell's surface. [10] You could also print a design on paper and tape it to the outside of the shell. If you do this, take a precision knife and cut the paper away in the spots you want the shell carved. In this way, you make your own stencil. [11]
    • Keep in mind that coconut shells are really thin. You may not be able to carve it the same way you might traditionally carve a piece of wood.
    • Think about using small holes to create different designs, like swirls, geometric patterns, or even faces or words.
  2. With a dremel, you can usually carve a design into the shell without going all the way through. Just be conscious of how deep you’re carving, so you don’t accidentally break through. Use a small bit on a drill to make delicate holes through the shell. [12]
    • This is the fun part of the carving process! It’s super cool to watch your bowl take on a design and transform before your eyes.
  3. Watermark wikiHow to Carve a Coconut Shell
    For example, file a “V” shape into the edge of the shell every 2 to 3 inches (5.1 to 7.6 cm) to resemble flower petals. [13] You can use flat, rounded, circular, or triangular files on a coconut shell. [14]
    • Be careful working with metal files. They can be very sharp!
  4. The finish of a coconut shell all on its own is perfectly beautiful, but adding color could give your bowl a whole new look! [15]
    • Acrylic paint is an excellent choice for coconut shells because it dries quickly.
  5. Watermark wikiHow to Carve a Coconut Shell
    Put a little beeswax on a clean rag and rub it all over the shell. Reapply wax to the rag when it gets dry, and continue buffing the shell until it has an even shine all over. [16]
    • You can reapply beeswax as needed to keep your carved shell looking nice.
  6. Watermark wikiHow to Carve a Coconut Shell
    Use a clear varnish if you want the shell’s color to shine through, or use a colored varnish for a deeper shine. Let the varnish dry completely before moving the shell. [17]
    • If the shell is to hold food or drink, don’t apply varnish or wax on the inside.
    • Always read the instructions on the varnish before using it to make sure you’re applying it properly.
    • Do this step in a well-ventilated area. Varnish can produce some pretty strong fumes!
  7. The heat from the sun will help the wax or varnish dry faster. Once the bowls are no longer sticky or tacky to the touch, you can move them. [18]
    • If the weather isn’t cooperating, try putting the shell somewhere warm and dry. Just avoid putting it too close to direct heat so that it doesn’t become a fire hazard.
    8. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If you use a coconut you bought from the store, save the water and meat. You can drink the water or add it to recipes, and the coconut meat is good to eat! [19]
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Be very careful if you use any power tools. Wear goggles to protect your eyes and consider wearing a face mask, too, because of potential dust. [20]
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You’ll Need

      Shell Prep and Sanding

      • Coconut
      • Bowl
      • Cutting board
      • Hammer
      • Screwdriver
      • Butter knife
      • Sanding flap wheel
      • Drill
      • Sandpaper
      • Dust mask
      • Protective gloves

      Designs and Finishes

      • Writing utensil
      • Power drill
      • Dremel
      • Precision knife
      • Metal files
      • Acrylic paint (optional)
      • Beeswax
      • Varnish

      You Might Also Like

      How to
      Clean and Polish Seashells
      How to
      Prune a Rubber Plant
      How to
      Drill a Hole in a Seashell (Without a Drill)
      How to
      Clean and Preserve an Animal Skull
      How to
      Dye Fabric with Beets
      How to
      Preserve Pinecones: 3 Easy Steps
      How to
      Clean and Polish a Conch Shell
      How to
      Make String Art: A Fun & Easy DIY
      How to
      Bend Bamboo
      How to
      Glue Rocks Together for Landscaping: The Best Glue to Use & More
      How to
      Make Moss Graffiti
      How to
      Make Sachet Bags: Sewing, Filing & More
      How to
      Make Sea Glass Using a Rock Tumbler
      How to
      Braid String
      Advertisement

      References

      1. ↑ http://patricklepetit.jalbum.net/PHATTHALUNG/LIBRARY/Coconut%20Craft.pdf
      2. ↑ https://youtu.be/oFDePsAqxnI?t=17
      3. ↑ http://patricklepetit.jalbum.net/PHATTHALUNG/LIBRARY/Coconut%20Craft.pdf
      4. ↑ https://youtu.be/qR9o9s8ItwA?t=406
      5. ↑ https://youtu.be/qR9o9s8ItwA?t=416
      6. ↑ http://patricklepetit.jalbum.net/PHATTHALUNG/LIBRARY/Coconut%20Craft.pdf
      7. ↑ https://youtu.be/cp1m60kW7QE?t=89
      8. ↑ https://youtu.be/qR9o9s8ItwA?t=516
      9. ↑ https://youtu.be/qR9o9s8ItwA?t=585
      1. ↑ https://youtu.be/DVfdw1sVqII?t=242
      2. ↑ https://youtu.be/CW17nvTi6aY?t=20
      3. ↑ https://youtu.be/z9CTlO3i8pE?t=60
      4. ↑ https://youtu.be/R1_ANt0teAU?t=62
      5. ↑ http://patricklepetit.jalbum.net/PHATTHALUNG/LIBRARY/Coconut%20Craft.pdf
      6. ↑ http://www.dsource.in/resource/coconut-shell-painting-bhubaneshwar-orissa/tools-and-raw-materials
      7. ↑ http://patricklepetit.jalbum.net/PHATTHALUNG/LIBRARY/Coconut%20Craft.pdf
      8. ↑ http://patricklepetit.jalbum.net/PHATTHALUNG/LIBRARY/Coconut%20Craft.pdf
      9. ↑ http://patricklepetit.jalbum.net/PHATTHALUNG/LIBRARY/Coconut%20Craft.pdf
      10. ↑ https://www.thekitchn.com/how-to-crack-and-open-a-coconut-cooking-lessons-from-the-kitchn-176321
      11. ↑ https://www.osha.gov/Publications/osha3157.pdf

      About This Article

      Thanks to all authors for creating a page that has been read 27,075 times.

      Did this article help you?

      Advertisement