How to Restring a Nylon String Classical Guitar

PDF download Download Article
Replace your nylon strings and keep your instrument sounding fresh
PDF download Download Article

If the strings on your classical or Spanish guitar are dirty, sound blunt, or can no longer hold their tune, this may be a sign that it's time to change them out. All you need to do is tie each string to the bridge, then tie each string to their corresponding barrels in the headstock. With this in-depth guide and a little patience, you’ll have a newly restrung guitar to play in just 15 to 30 minutes.

Restringing a Classical or Spanish Guitar

  1. Loosen and untie each string from the headstock and the bridge.
  2. Insert the thickest (E) string into the far left hole in the bridge.
  3. Wrap the string’s end behind the main length and insert it into the loop.
  4. Wrap the end of the string around the left edge of the loop 1 time.
  5. Hold the end over the hole of the next string and tighten the knot.
  6. Repeat these steps with the 4th (D) and 5th (A) strings.
Section 1 of 4:

Removing the Existing Strings

PDF download Download Article
  1. Twist each of the tuning pegs by hand or using a winder until the string unravels completely. Untie the strings from the barrels or use scissors to clip them off. [1]
    • If you’re in a hurry, clip the strings with scissors or wire cutters after detaching them from the headstock.
  2. Undo the knot at the bridge and push each string back through the hole in the bridge. Pull all of the strings out of the bridge and dispose of them. [2]
    • Optionally, scrape up any grime on the fretboard with a popsicle stick. Clean the board with a toothbrush and a silicone-free guitar cleaner . Rub lemon oil on the fretboard with a soft cloth. [3]
    • If you prefer to change the strings one at a time, remove each string before you tie on the new one. [4]
    Advertisement
  3. Use normal tension nylon strings or strings made for classical guitars. Try to avoid steel strings or acoustic guitar strings that have a ball at one end.
    • Try out different tension nylon strings to see if you like the sound better. [5]
    • The tension in steel strings is much higher than nylon, which can put too much pressure on the neck, eventually causing it to bend or crack.
    4. Advertisement
Section 2 of 4:

Tying the New Strings to the Bridge

PDF download Download Article
  1. Push the E string through the far left hole so that about 3 to 4 in (7.6 to 10.2 cm) sticks out towards the bottom of the guitar. [6] Take the end and wrap it behind the main length of the string so that the end is on the left side. Insert the end inside the loop created so that it faces to the right. [7]
    • If one end of your new string has a rough, inflexible texture while the other end is smooth and flexible, use the smooth end to loop through the bridge. [8]
  2. Wrap the end of the E string around the left side of the loop 1 time. The bass strings on the left of your fretboard are thicker, and most only need to be wrapped around once to be secure. However, if your string is thinner, wrap it around 2 or 3 times. [9]
    • To secure the string, professional guitarist Carlos Alzonzo Rivera says “you slide one string in one end of the hole… Put in a little bit of the string there and then loop it back around. And then you have to tie a couple loops on the bridge, and then make sure the string is secure.” [10]
  3. Press your finger over the end of the E string so it lies flat just above the hole in the bridge for the string next to it (the A string). Pull on the main length of string to tighten the knot. [11]
    • If the end of the string is too long, trim it with a pair of scissors or wire cutters.
    • Make sure the end of the string comes down under the bridge before you tighten it. This will help to ensure that your knot won’t come loose.
  4. Wrap the thicker strings next to the E string the same way. Make sure that the bottom of each loop dips under the bridge with their ends just above the hole in the bridge. Leave the 4th (D) string slightly loose so you can tuck the tail of the 3rd (G) string next to it underneath. [12]
    • The A string will go over the end of the E string, tying it down. This prevents the end of your strings from whipping the guitar and scratching the surface.
    • Alternatively, just clip the ends of each string so they won’t be long enough to whip the guitar. [13]
  5. Thread the thinnest string through the rightmost hole in the bridge. Wrap the end behind the main length so the end points right. Fold the end over the top of the string so that the end now points left. [14] Insert the end in the back of the loop created. Wrap the string around the right side of the loop twice. [15]
    • This will create a secure knot around the bridge.
    • This is the same process as above, except the end of the string points in the opposite direction.
  6. Hold your finger over the end of the e string so it lies flat just above the hole in the bridge for the string directly beside it (the B string). Gently pull on the main length of string to tighten the knot. [16]
  7. This will create an even line of knots along the bridge, where the end of every string is tucked into the knot of the string next to it. [17] Leave the 3rd (G) string a little loose so you can tuck in the end of the 4th (D) string next to it.
  8. Take the end of the 3rd (G) string and tuck it over the hole of the 4th (D) string. Hold down the end and tighten the D string by pulling on its main length. Tuck the end of the D string over the hole of the G string, then tighten the G string by tugging gently on the main length above the bridge. [18]
    • This will create a nice even tie, where both ends are tucked into the knot of the other string.
    • Alternatively, repeat the first 3 steps with every string except the thinnest treble string (e). Follow the previous 4 steps for the e string and tuck its end into the B string’s knot. [19]
    9. Advertisement
Section 3 of 4:

Attaching the Strings to the Headstock

PDF download Download Article
  1. Rotate the white barrel (capstan) inside the headstock until the hole faces directly up or follows the natural curve of the headstock. This allows you to see what you're doing. [20]
    • Optionally, turn all the tuning pegs so that all the holes face upward and you don’t have to repeat this step.
  2. Push the end of the 6th (E) string down through the corresponding hole on barrel (capstan) in the neck. Catch the end with your finger so you can run it back through the gap above the capstan. [21]
    • Some people prefer to insert the string through the hole twice so it’s more secure. [22]
  3. Push the end of the string upward with your fingers so it pokes up above the capstan you threaded it into. [23] Going above the capstan with the E string can give you more room to work.
    • You can also push the string below the capstan—it depends on your preference.
  4. Pull the end of the string tight and place your finger on the white piece at the top of the fretboard. Pull the string down, keeping your finger at the same place along the string, until your finger reaches the first fret. This leaves slack in the middle of the neck so you can safely wind the string. [24]
    • Alternatively, push the string to the right edge of the fretboard on the 1st fret.
  5. Tie an overhand knot on the barrel by crossing the end of the string over the main length on the other side of the barrel. Insert the end into the loop created and pull tight to create the knot. [25]
  6. Turn the tuning peg clockwise to tighten the string. When the string is tight and secured around the barrel, stop winding. Cut off any excess string with a pair of scissors or wire cutters. [26]
    • Alternatively, use a pair of nail clippers to trim the ends of the strings.
  7. Working in order from the 6th (E) string to the 1st (e) string can make it easier to properly attach the new strings to the neck of the guitar. [27] Be careful not to tighten the strings so much that they snap.
    • After you've attached all of your new strings, you’re ready to tune your guitar .
    • Alternatively, you can attach the new E string before you remove the old A string and tune the guitar to itself. To do this, play the E string at the 5th fret and match it to the sound of the A string.
    8. Advertisement
Section 4 of 4:

How Often to Change Guitar Strings

PDF download Download Article
  1. Because each player and guitar is different, there’s no set standard for how often you need to restring your guitar. However, if your strings are discolored, the sound is dull, the strings won’t stay in tune, or they feel stiff or brittle, it might be time to switch them out. [28]
    • Alternatively, change your strings every month if you play more than 3 hours per day, every 2 to 3 months if you play 1 to 2 hours per day, or every 4 months if you play less than an hour a day.

Community Q&A

Search
Add New Question
  • Question
    Do nylon strings go dead?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    Yes, nylon strings will eventually stretch as they age and become harder to tune. However, they typically last longer than metal strings, which can corrode or rust.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 2
  • Question
    Can you use ball end strings on a classical guitar?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    You can, but most musicians say they will not sound as good as classical guitar strings.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 3
  • Question
    How often should you change strings on a classical guitar?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    If you play your guitar a lot, it’s a good idea to change the strings every 4-5 weeks. You may need to change them more or less often depending on how much use your guitar gets or whether your strings tend to get dirty or lose tone easily.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 2
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Your guitar strings will need to be tuned and stretched several times before they settle and stay in pitch. [29]
        Thanks
        Helpful 0 Not Helpful 0
      • Try to avoid overtightening strings—the strings can snap, fly back, and hurt you. This can put too much pressure on the bridge and neck, possibly causing them to crack or break.
        Thanks
        Helpful 0 Not Helpful 0
      • Using a string winder drastically speeds up the winding process. However, be careful not to tighten the string too much or it could snap.
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Classical guitar
      • New pack of classical guitar (nylon) strings
      • Popsicle stick, silicone-free guitar cleaner , lemon oil , and a toothbrush (optional)
      • String winder (optional)
      • Scissors, wire cutters, or nail clippers

      Video

      You Might Also Like

      How to
      Restring Your Guitar at Home: Step-by-Step Guide
      How to
      Change Strings on an Electric Guitar
      How to
      Lower the Action on an Acoustic Guitar
      How to
      Rapidly Learn to Play the Acoustic Guitar Yourself
      How to
      Replace the Bridge on an Acoustic Guitar
      How to
      String an Acoustic Guitar
      How to
      Adjust Acoustic Guitar Intonation
      How to
      Clean an Acoustic Guitar
      How to
      Use Good Guitar Posture
      How to
      Capo a Fret on an Acoustic Guitar
      How to
      Tune an Acoustic Guitar
      How to
      Play Classical Guitar
      Advertisement

      References

      1. ↑ https://youtu.be/4Cw84_0KHTI?t=7
      2. ↑ https://youtu.be/4Cw84_0KHTI?t=7
      3. ↑ https://acousticguitar.com/how-to-clean-a-guitar-fretboard-the-proper-and-safe-way/
      4. ↑ https://www.derek-hasted.co.uk/faqs/restring/
      5. ↑ https://www.guitarworld.com/features/classical-guitar-setup
      6. ↑ https://youtu.be/JRR5cX8eS0g?t=263
      7. ↑ https://youtu.be/bU-HTdGtkH4?t=83
      8. ↑ https://youtu.be/bU-HTdGtkH4?t=50
      9. ↑ https://youtu.be/bU-HTdGtkH4?t=84
      1. ↑ Carlos Alonzo Rivera, MA. Professional Guitarist. Expert Interview. 18 August 2020.
      2. ↑ https://youtu.be/bU-HTdGtkH4?t=101
      3. ↑ https://youtu.be/bU-HTdGtkH4?t=120
      4. ↑ https://youtu.be/22WAxzDxeJ8?t=853
      5. ↑ https://youtu.be/4Cw84_0KHTI?t=106
      6. ↑ https://youtu.be/4Cw84_0KHTI?t=106
      7. ↑ https://youtu.be/4Cw84_0KHTI?t=126
      8. ↑ https://www.musicradar.com/tuition/guitars/guitar-setup-how-to-restring-a-nylon-string-classical-guitar-626676
      9. ↑ https://youtu.be/ycWbsUDdR_E?t=451
      10. ↑ https://youtu.be/ycWbsUDdR_E?t=451
      11. ↑ https://youtu.be/bU-HTdGtkH4?t=149
      12. ↑ https://youtu.be/bU-HTdGtkH4?t=149
      13. ↑ https://www.musicradar.com/tuition/guitars/guitar-setup-how-to-restring-a-nylon-string-classical-guitar-626676
      14. ↑ https://youtu.be/bU-HTdGtkH4?t=149
      15. ↑ https://youtu.be/bU-HTdGtkH4?t=159
      16. ↑ https://youtu.be/bU-HTdGtkH4?t=177
      17. ↑ https://youtu.be/bU-HTdGtkH4?t=218
      18. ↑ https://youtu.be/bU-HTdGtkH4?t=243
      19. ↑ https://acousticguitar.com/how-guitar-strings-age-and-how-to-know-when-to-change-them/
      20. ↑ https://www.musicradar.com/tuition/guitars/guitar-setup-how-to-restring-a-nylon-string-classical-guitar-626676

      About This Article

      Article Summary X

      If your classical guitar strings buzz, sound blunt, or don't hold their tune, it's probably time to change them. To remove your old strings, loosen each string at the head and untie them at the bridge. You'll want to use nylon strings for your classical guitar, since steel strings can damage it. Tie your new strings to the bridge, looping each string around itself. Since the other 3 strings are thinner and can slip out, you’ll want to loop them 3 times before tying them. You'll thread each string through its hole in the headstock and tighten them by turning the knobs. For more tips from our Guitar co-author, including how to tune your classical guitar, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 595,428 times.

      Reader Success Stories

      • Tuula Westra

        Oct 6, 2016

        "I have taken lessons for six months, returned from my vacation, and the sixth string was loose on my guitar. I ..." more
      More reader stories Hide reader stories
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement