Download Article
A simple and easy guide to charging a Mophie powerstation
Download Article
This wikiHow teaches you how to charge your Mophie Juice Pack battery case and Mophie Powerstation power bank. If you have a Qi-supported wireless charger, you can recharge both your phone and Mophie Juice Pack wirelessly, even if your phone doesn't support wireless charging. You can also use a standard USB-C cable to recharge any Mophie product.
Mophie PowerStation Mini and XL Charging Tips
If your Mophie PowerStation or block is out of battery, you can charge it using the included micro-USB cable. Connect one end to your Mophie device and the other end to your computer or USB wall adapter.
Steps
-
Connect your wireless charging base to a power source. You can use a Mophie wireless charging base or any other Qi-compatible base. Other types of wireless chargers, such as those in public locations and those built in to furniture should also work. [1] X Research source
-
Attach the battery to your phone. The steps are different depending on your Juice Pack:
- If you're using a Juice Pack Connect, flip your phone over and align the battery next to the battery anchor with the green side down. Then, slide the battery left over the anchor until it clicks into place.
- If you have a Juice Pack Access, Air, or standard Juice Pack, snap your phone into the battery case securely.
Advertisement -
Place the Juice Pack on the wireless charging base. Just lay your phone down on the center of the charging base with the battery-side down. As soon as the case contacts the charging base, your phone will begin to charge. Once the phone is charged, your Juice Pack will begin to re-charge. [2] X Research source
- Charging your case wirelessly is significantly slower than doing so with a cable. [3] X Research source If you need a faster charge, use the USB-C cable instead.
-
Press the status button to check the charging status. This is the first button at the bottom of your Juice Pack's back side. If all four LEDs light up, you'll know the case is charged. If only one, two, or three LEDs are illuminated, keep charging until all four are lit.
- If you have a Juice Pack Connect, you can remove the rechargeable battery once charged and keep it in a safe place until you need it.
Advertisement
-
Attach the battery to your phone. The steps are different depending on your Juice Pack:
- If you're using a Juice Pack Connect, flip your phone over and align the battery next to the battery anchor with the green side down. Then, slide the battery left over the anchor until it clicks into place.
- If you have a Juice Pack Access, Air, or standard Juice Pack, snap your phone into the battery case securely.
- If you don't want to charge your phone at the same time as you charge the Juice Pack Connect, you don't need to attach it to the phone first—just connect the USB-C cable directly to the battery and then to a power source. When the battery is charged, you can use it to charge your phone.
-
Connect the smaller end of the USB-C cable to your Juice Pack battery. The port is on the bottom edge of the case. Use the cable that came with your case or a compatible USB-C to USB-A cable.
-
Connect the other end of the cable to a USB wall adapter. If you don't want to charge through a wall adapter, you can also connect the cable to another device that can give it power, such as a computer's USB port. Once connected, your phone will start to charge first—when the phone is finished charging, your Juice Pack will begin to charge.
-
Press the status button to check the charging status. This is the first button at the bottom of your Juice Pack's back side. If all four LEDs light up, you'll know the case is charged. If only one, two, or three LEDs are illuminated, keep charging until all four are lit.
- Your phone's charging port will remain available while you charge the battery pack—however, charging your phone through its own charging port will not charge the Juice Pack case.
- If you have a Juice Pack Connect, you can remove the rechargeable battery once charged and keep it in a safe place until you need it.
Advertisement
-
Connect the small end of the USB-C cable to your PowerStation's charge port. It's on the bottom edge of the Powerstation Mini and Powerstation XL, and on the right edge (toward the bottom) on the Powerstation XXL.
-
Connect the other end of the USB-C cable to a power source. You can charge your Powerstation using a wall charger or a computer. Once connected, your Powerstation will begin to charge.
- If you have a phone connected to your Powerstation's Priority Pass-Through port, your Powerstation will not start to charge until the connected device reaches its maximum charge level. The Priority Pass-Through port has an icon of a battery with two horizontal arrows and a lightning bolt. If you just want to charge the Powerstation, make sure nothing is connected to that port.
-
Press the status button on your Powerstation to check the charge progress. It's the button to the left of the four LEDs. If all four LEDs light up when you press the button, it's fully charged.
-
Remove the Powerstation from the power source when the charge is complete. Now that your Powerstation is charged, you can use it to charge your devices when you're on the go.
Advertisement
Community Q&A
Search
-
QuestionHow long does it take for a mophie case to fully charge?Community AnswerThis will differ, depending on the charger you use. Since the device has a 12 Ah battery, if you charge it with a 1 Amp charger, it will take 12 hours to charge. Similarly, if you charge it with a 2.1 Amp charger, it will take just under 6 hours to charge. This is assuming a 100% charging efficiency.
-
QuestionHow can I tell if my Mophie is charging?Community AnswerLook at the lit up dots on the Mophie. If they're flashing, that means it's charging.
-
QuestionWhat is the red and green toggle at bottom of the case for?Erin FonvergneCommunity AnswerIt's the power switch. When it is red the charger is off. Switch it on when you want to start charging your device. Switch it off once your device is charged.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
References
- ↑ https://support.zagg.com/hc/en-us/articles/360024607512-How-Do-I-Charge-My-Phone-Using-The-Juice-Pack-Case#:~:text=Checkingyourjuicepackcase's,Knowbeforeyougo
- ↑ https://support.zagg.com/hc/en-us/articles/360024910151-How-Do-I-Charge-My-Juice-Pack-Access-Case-
- ↑ https://www.imore.com/can-you-use-usb-c-charge-mophie-juice-pack-access
About This Article
Thanks to all authors for creating a page that has been read 178,223 times.
Advertisement