PDF download Download Article
Make your ring sparkle again with these simple and safe cleaners
PDF download Download Article

If your engagement ring doesn’t look as bright or shiny as it did when you first got it, then it’s time to give it a quick clean. Cleaning your ring at home is easy with some soapy water or jewelry cleaner, but there are multiple misconceptions about household cleaners that can actually damage your ring. We know your engagement ring is really precious, so keep reading to find out the most effective ways to clean, what to avoid, and how to keep your ring looking great between cleanings.

Best Way to Clean an Engagement Ring

To clean your diamond engagement ring, place it in a small bowl of warm water and dish soap. Soak your ring for about 20–30 minutes, and then gently scrub away dirt and grime with a soft-bristled toothbrush. Dry your ring off with a soft lint-free cloth to finish.

Section 1 of 4:

Cleaning and Polishing Your Engagement Ring

PDF download Download Article
  1. Fill a small bowl with warm water and a few drops of dish soap, and mix it together. Then, simply soak your engagement ring in the soapy solution for about 20–30 minutes to loosen dirt and grime on the surface. [1] After that, gently scrub the ring with a soft-bristle toothbrush and pat it dry with a lint-free cloth. [2]
    • Dish soap works well for cleaning any type of metal or gemstone on your engagement ring.
    • Avoid using paper towels to dry your ring because they could leave scratches on the metal.
  2. Soak your ring in a commercial fine jewelry cleaner for a deeper clean. Jewelry cleaners contain chemicals that help loosen dirt and grime without damaging the metal or gemstones on your ring. Just open the container and set your jewelry in the solution for about 2 minutes. Then, take your ring out and blot it dry with a clean lint-free cloth. [3]
    • Jewelry cleaner is safe for any type of metal and gemstone, so it’s perfect for cleaning traditional diamond rings as well as rubies, sapphires, cubic zirconia, topaz, and tourmaline.
    • Read the instructions on your jewelry cleaner thoroughly. Some cleaners may require additional rinsing before you dry off your ring while others don’t.
    Advertisement
  3. Buff and polish the engagement ring band with a polishing cloth . A polishing cloth has an inner side that polishes metal and an outer buffing cloth to restore the shine on your ring. Start by rubbing the ring’s band with the white inner cloth until the ring looks bright and lustrous. Then, switch to the opposite side of the cloth to buff the surface clean. [4]
    • Polishing cloths work well on gold, silver, and platinum, and it’s a great finishing touch after using any other cleaner.
  4. Advertisement
Section 2 of 4:

Cleaners to Avoid

PDF download Download Article
  1. Harsh cleaning chemicals, such as bleach, hydrogen peroxide, ammonia, Windex, and acetone, can all break down the metals on your engagement ring. They may even make the gemstones look dull, so it’s best to avoid using them. [5]
  2. Baking soda and toothpaste both have slight abrasives that could leave scratches on the ring’s band or the gemstones. Steer clear of abrasive cleaners to ensure your ring maintains its sparkle and shine. [6]
  3. Both vinegar and witch hazel are slightly acidic, so soaking your ring in them could damage the gemstones or break down plated metal on the surface. [7]
  4. Even though ketchup may remove some tarnish from silver engagement rings, it may permanently etch or dull the metal after using it. It’s best to stick to soapy water or cleaners specifically made for jewelry rather than trying a home remedy like ketchup. [8]
  5. While beer may help polish a gold band on your engagement ring, it can damage or stain the gemstones so they lose their sparkle. Rather than risking the look of your diamonds or other gems, just avoid using beer as a cleaner. [9]
  6. Boiling water can cause the metal on your ring to expand, which may cause the stones to pop out or come loose. Stick to room temperature or warm water while you’re cleaning your ring to avoid damage. [10]
  7. Ultrasonic cleaners use vibrations to break apart any gunk that’s stuck in your engagement ring. However, these vibrations can loosen gemstones attached to the ring’s band. Leave ultrasonic cleanings to professional jewelers so you don’t accidentally lose a stone on your ring. [11]
  8. Advertisement
Section 3 of 4:

How often should you clean your engagement ring?

PDF download Download Article
  1. A quick weekly clean prevents buildup and film from forming on your ring. Carve out some time in your schedule to take care of your ring each week so it doesn’t lose its shine or luster. [12]
    • Because you’ll normally wear your engagement ring every day, it may get dirtier faster than other jewelry. If you notice dirt or grime on the surface more frequently, then clean your engagement ring 2 times a week instead.
  2. While regular at-home cleaning will help keep your ring looking great, professional deep cleans by a jeweler can restore the look of your jewelry. For the best results, go to the jeweler where your ring was bought. They will be able to use a steam cleaner or ultrasonic cleaner properly so your ring doesn’t get damaged. [13]
    • Professional cleaning prices usually depend on the size of the ring, but it's usually only $25–50 USD.
  3. Advertisement
Section 4 of 4:

PDF download Download Article
  1. Grease and oils stick to diamond gemstones really easily, so they can start to look dirty or dull any time you touch them. Once you put your engagement ring on for the day, try to avoid touching or fiddling with it so it continues to look shiny and sparkly. [14]
  2. To prevent your ring from getting dirty or damaged, take it off whenever you’re cleaning, exercising, swimming, cooking, or doing any other activity that could get messy. That way, you don’t risk any dirt, sweat, or grease covering the band or gemstones. [15]
    • If you’re applying lotion or sunscreen, take off your ring to prevent a film from developing on the surface.
    • Take your ring off before you wash your hands. Soaps could damage the stone or metal, or worse, the ring could easily slip off your finger and go down the drain.
  3. Store your ring in a jewelry box when you’re not wearing it. Jewelry boxes have soft linings inside to prevent your ring from getting scratched or damaged. It also gives your ring a safe storage place so you don’t accidentally lose or misplace it. Keep the box closed to prevent dirt or dust from getting on your ring while you’re storing it. [16]
  4. Regularly check your ring to see if any of the prongs holding the gemstones look bent or damaged. Inspect if the gemstones look out of place or if they’ve loosened and shifted around. If you notice any of these signs, keep your ring in a jewelry box and take it to a jeweler to have it inspected and repaired. [17]
  5. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      About This Article

      Thanks to all authors for creating a page that has been read 1,240 times.

      Did this article help you?

      Advertisement