How to Clean Mold in a Basement

PDF download Download Article
PDF download Download Article

Put on protective gear before inspecting or cleaning mold. Find out the size of the affected area, then decide if you prefer to hire a professional. To clean it yourself, apply a mold-killing cleaning agent such as diluted bleach, undiluted vinegar, or 3% hydrogen peroxide. Let the solution sit briefly, then scrub and rinse the area. Eliminate any leaks, condensation and excess humidity, since reducing moisture is the most important way to combat basement mold.

Part 1
Part 1 of 3:

Evaluating the Scope of the Problem

PDF download Download Article
  1. Wear old clothing and long gloves that extend to the middle of your forearms. Put on an N-95 respirator, and follow the instructions that came with it to ensure a proper fit. Wear goggles without ventilation holes. [1]
    • You can purchase an N-95 respirator mask online or from a hardware store for about $12 to $25.
    • Inspecting for mold can stir up airborne spores, so it’s important to wear protective gear.
  2. Look for mold near the intake of your heating/ventilation/air conditioning system. Inspect inside the air ducts for a musty smell or noticeable mold growth. If all you find is dust in the return registers, that’s normal and you can vacuum or remove the registers to clean them. [2]
    • If you don’t find any signs of mold, and no one in your household has unexplained illness, symptoms or allergies, your air ducts are most likely not contaminated.
    • If you suspect contamination in your HVAC system, turn it off and don’t run it until you have the air ducts cleaned. [3]
    Advertisement
  3. Contact a professional mold removal service if you find a strong odor, damage from contaminated water, and/or areas of mold larger than ten square feet (three meters), approximately three feet by three feet (91 cm by 91 cm). Read online reviews or obtain a referral for a qualified mold remediation contractor. Check their references and ask what EPA recommendations or other professional guidelines they’ll follow. [4]
    • For large areas of mold, the basement and HVAC may need to be sealed off with plastic sheeting.
    • Contaminated water can occur from flooding or sewage backup.
    • A strong, moldy odor may indicate unseen mold growth behind walls, under flooring or beneath baseboards.
    • You may be able to obtain a free estimate detailing what services are needed. The average cost for mold remediation is about $7,500. [5]
    4. Advertisement
Part 2
Part 2 of 3:

Removing the Mold

PDF download Download Article
  1. Ventilate your working area as much as possible. Open windows and doors, and use fans. Wear the same protective gear you did when you were inspecting: old clothing, long gloves, an N-95 respirator, and goggles without ventilation holes. [6]
  2. Take any moveable items from the area outside to inspect them. Throw away disposable items like cardboard boxes. Wash and dry any contaminated clothing. Clean contaminated items before returning them to the basement, once you’ve finished cleaning the basement mold. [7]
    • You can deep clean leather, wood or inorganic furniture .
    • Upholstered furniture with visible mold will need to be disposed of or reupholstered by a professional.
    • Don’t store cellulose-based items, such as cardboard, paper, or firewood in your basement. [8]
  3. If you see visible mold on the surface of carpeting, sweep it with a broom to loosen the mold. Use a vacuum with a HEPA filter to vacuum the carpeting. Apply a cleaning solution and scrub the area. Allow the carpet to dry completely.
    • If the carpet is removable, let it dry outside in the sunshine. If not, turn fans on to help the carpet dry.
    • Dispose of any carpeting that’s been soaked through. [9]
  4. Perform a small test area first on each item you’re cleaning to make sure the cleaning agent doesn’t damage it. You can clean mold with diluted bleach, diluted Borax, undiluted vinegar, a baking soda solution, or 3% hydrogen peroxide. [10] Depending on which method you choose, you can use a bucket or spray bottle to hold the solution. [11]
    • For hard surfaces, combine a gallon of water with a cup of bleach, or one part bleach to sixteen parts water. For porous surfaces, try one part non-ammonia, liquid dish detergent, ten parts bleach and twenty parts water.
    • To use baking soda, combine 1/4 to 1/2 teaspoon (1 to 2 mL) baking soda with a full spray bottle of water. Alternately, combine 1/2 cup (118 mL) baking soda with one cup (250 mL) of water and one tablespoon (15 mL) of mild liquid detergent.
    • Borax is safe for porous and nonporous materials. Combine a cup (225 mL) of Borax with a gallon (4 L) of water.
    • Reader Poll: We asked 308 wikiHow readers which chemical solution is best for cleaning mold, and only 10% of them said they prefer 3% hydrogen peroxide . [Take Poll]
      • While 3% hydrogen peroxide is known to work for mold, our readers say they've had more success with other cleaning agents: undiluted vinegar is the most recommended cleaning option.
  5. Use a spray bottle, a sponge or a rag dipped in your cleaning agent to apply it to the moldy area. Allow the cleaning agent to sit for five to fifteen minutes. [12]
  6. Use a scrub brush or cloth to scrub the area with your chosen cleaning agent. Make sure to get into hard-to-see areas like cracks and crevices as well as the visible surfaces. Rinse the brush or cloth often to avoid spreading mold residue. [13]
  7. Use a clean sponge or rag to wipe down the area with water. Change the rinse water regularly to keep it clean. Once the area dries, check for any mold you may have missed. If you still see signs of mold, repeat the scrubbing and rinsing process. [14]
    8. Advertisement
Part 3
Part 3 of 3:

Reducing Moisture

PDF download Download Article
  1. Increase the ventilation in your basement. Run air conditioners and dehumidifiers as needed. [15] If you have a humidifier, clean and treat it with an antimicrobial solution. [16]
    • You can increase ventilation by using oscillating fans, opening windows and doors, and using a dehumidifier.
    • You can purchase antimicrobial solutions online or at a hardware store.
  2. Make sure your large appliances, such as your washer and dryer, are vented. Your washing machine needs a floor drain and secure hose connections. Install a pan for overflow right under the machine, if needed. [17]
  3. Ensure that your gutters discharge water at least six feet away from exterior walls. If your gutters are sending water too close to the home, install gutter extenders. Look for leaky pipes, and repair your piping , if needed. [18]
    • Sump pumps should discharge water at least twenty feet from your home.
  4. Ensure that the ground slopes away from the house so that water won’t pool up against the foundation. [19] Clear away any wet leaves against the exterior walls and don’t allow debris to accumulate there. [20]
  5. Clean the condensation pan under the coil of your central AC with a 1/2 percent bleach solution. Check that the continuous drain is functioning. If you find any leaky duct joints, seal them with flexible mastic, which you can purchase at a heating and cooling supply store. [21]
    • Clean the AC condensation pan before each cooling season.
  6. Make sure your roof is insulated, and there are no leaks in your roof or ceiling. Insulate your windows with proper flash and caulking to minimize condensation. Waterproof and insulate exterior walls . [22]
    • You can have your basement waterproofed professionally, or apply sealant to your walls and floors. Fill in any cracks with a waterproof filler.
  7. Remove any vinyl wallcoverings, which trap humid air between drywall and the wallpaper. After fully cleaning the area, use paint or wall coverings with permeable paper backings instead. [23]
  8. Unfinished basements or crawlspaces with bare earth flooring transmit a lot of moisture. Have flooring put in, or do it yourself by covering the area with 6-mill poly sheeting. Make sure the basement is heated, cooled and humidified equally with the rest of the house. [24]
    9. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What do I do if I have mold in my basement?
    Mike Kapur
    Certified Mold Assessor & Home Inspector, Sonic Home Inspections
    Mike Kapur is a home inspector and the owner of Sonic Home Inspections, a home inspection company in Westchester, New York. With over 15 years of experience in pre-inspecting properties, Mike specializes in mold, radon, asbestos, lead, water, and air quality testing as well as hazardous materials, pest, infrared, and general home inspections. Prior to founding Sonic Home Inspections, Mike worked pre-inspecting apartments. Mike holds a BS in Accounting from Queens College and is a Certified Mold Assessor in the state of New York.
    Mike Kapur
    Certified Mold Assessor & Home Inspector, Sonic Home Inspections
    Expert Answer
    Check the outside perimeter of your home to see if there's anywhere where moisture gathers that causes mold to grow.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 0
  • Question
    Is the mold in my basement dangerous?
    Dario Ragnolo
    House Cleaning Professional
    Dario Ragnolo is the Owner and Founder of Tidy Town Cleaning, a home cleaning service in Los Angeles, California. His business specializes in residential & commercial cleaning. He is a second generation home cleaning expert, who grew up around his parents cleaning business in Italy.
    Dario Ragnolo
    House Cleaning Professional
    Expert Answer
    There's no safe amount of mold. There are no types of mold that have health benefits. The effects will depend on the amount of mold and the person's sensitivity to it, but when mold is inhaled, the symptoms can occasionally be severe.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    Will a dehumidifier kill mold?
    Dario Ragnolo
    House Cleaning Professional
    Dario Ragnolo is the Owner and Founder of Tidy Town Cleaning, a home cleaning service in Los Angeles, California. His business specializes in residential & commercial cleaning. He is a second generation home cleaning expert, who grew up around his parents cleaning business in Italy.
    Dario Ragnolo
    House Cleaning Professional
    Expert Answer
    No, but it will reduce moisture in the area to help prevent mold from returning. It's very important to reduce the amount of humidity that's in your basement in order to keep the mold from coming back, and a dehumidifier can help with that. If your basement has an outside door or windows, you can also open those to try to ventilate it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 0
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Never mix bleach with products containing ammonia or other chemical cleaning agents. Don’t mix multiple cleaning solutions unless you’ve confirmed that it’s safe to do so.
        Thanks
        Helpful 4 Not Helpful 0
      • Clean all moldy surfaces before applying any paint or caulk.
        Thanks
        Helpful 3 Not Helpful 0
      • Don’t touch any mold or contaminated items with your bare hands.
        Thanks
        Helpful 4 Not Helpful 1
      • Mold can be cleaned, but may cause permanent staining or cosmetic damage.
        Thanks
        Helpful 1 Not Helpful 1
      • Consult with a health professional before starting cleanup if you have concerns about your health, such as allergies or respiratory problems. [25]
        Thanks
        Helpful 0 Not Helpful 0
      • If you’re using a strong disinfectant, such as bleach, wear gloves made from natural rubber, nitrile, neoprene, polyurethane or PVC. [26]
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You'll Need

      • Old clothing
      • Long gloves
      • N-95 respirator
      • Safety goggles
      • Cleaning agent of choice
      • Bucket or spray bottle
      • Scrub brush or rags
      • Clean sponge or cloth

      You Might Also Like

      Everything You Need to Know to Build Your Very Own Root Cellar
      How to
      Waterproof Your Basement
      How to
      Install Basement Windows
      How to
      Cover Exposed Pipes in a Basement
      How to
      Make a Basement Smell Better
      Fast and Effective Ways to Dry a Basement After a Flood
      Advertisement

      References

      1. ↑ https://www.epa.gov/mold/brief-guide-mold-moisture-and-your-home#tab-4
      2. ↑ https://www.epa.gov/indoor-air-quality-iaq/should-you-have-air-ducts-your-home-cleaned#deciding
      3. ↑ https://www.epa.gov/mold/mold-cleanup-your-home
      4. ↑ https://www.epa.gov/mold/mold-cleanup-your-home
      5. ↑ http://www.homeadvisor.com/cost/environmental-safety/remove-mold-and-toxic-materials/
      6. ↑ https://www.fema.gov/pdf/rebuild/recover/fema_mold_brochure_english.pdf
      7. ↑ http://removemoldguide.com/do-it-yourself/basement-mold-removal/
      8. ↑ https://www.familyhandyman.com/cleaning/mold-and-mildew/how-to-combat-mold-and-mildew/view-all
      9. ↑ https://www.fema.gov/pdf/rebuild/recover/fema_mold_brochure_english.pdf
      1. ↑ Mike Kapur. Certified Mold Assessor & Home Inspector, Sonic Home Inspections. Expert Interview. 19 August 2020.
      2. ↑ https://removemoldguide.com/do-it-yourself/how-to-get-rid-of-mold/
      3. ↑ https://removemoldguide.com/do-it-yourself/how-to-get-rid-of-mold/
      4. ↑ http://removemoldguide.com/do-it-yourself/basement-mold-removal/
      5. ↑ http://removemoldguide.com/do-it-yourself/basement-mold-removal/
      6. ↑ Mike Kapur. Certified Mold Assessor & Home Inspector, Sonic Home Inspections. Expert Interview. 19 August 2020.
      7. ↑ https://www.familyhandyman.com/cleaning/mold-and-mildew/how-to-combat-mold-and-mildew/view-all
      8. ↑ https://www.familyhandyman.com/cleaning/mold-and-mildew/how-to-combat-mold-and-mildew/view-all
      9. ↑ http://moldmanusa.com/106-tips-about-mold-mold-remediation-mold-removal-mold-testing-and-mold-prevention/
      10. ↑ Mike Kapur. Certified Mold Assessor & Home Inspector, Sonic Home Inspections. Expert Interview. 19 August 2020.
      11. ↑ http://moldmanusa.com/106-tips-about-mold-mold-remediation-mold-removal-mold-testing-and-mold-prevention/
      12. ↑ https://www.familyhandyman.com/cleaning/mold-and-mildew/how-to-combat-mold-and-mildew/view-all
      13. ↑ https://www.familyhandyman.com/cleaning/mold-and-mildew/how-to-combat-mold-and-mildew/view-all
      14. ↑ https://www.familyhandyman.com/cleaning/mold-and-mildew/how-to-combat-mold-and-mildew/view-all
      15. ↑ https://www.familyhandyman.com/cleaning/mold-and-mildew/how-to-combat-mold-and-mildew/view-all
      16. ↑ https://www.epa.gov/mold/mold-cleanup-your-home
      17. ↑ https://www.epa.gov/mold/brief-guide-mold-moisture-and-your-home#tab-4

      About This Article

      Article Summary X

      Before cleaning mold in a basement, remove and clean any contaminated items, such as boxes, furniture, or clothing. To remove mold from hard surface use a solution of water and bleach to scrub the affected areas. Alternatively, for porous surfaces, try a mixture of liquid dish detergent, water, and bleach. If there's visible mold on the carpet, sweep it to loosen the mold, then vacuum it up. To learn how to reduce moisture that causes mold, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 105,392 times.

      Did this article help you?

      Advertisement