How to Clean Rotors

Your car's or bike's rotors are a crucial part to the braking system. Rotors should be cleaned periodically with regular maintenance or after particularly messy journeys. Regardless of when you take the time do so, the process can be painless and is a good chance to keep an eye on your tires' and brakes' health.

Method 1
Method 1 of 3:

Cleaning Your Car's Rotors

  1. Accessing the rotors requires lifting the car with a jack, and lifting on an unlevel plane is very dangerous. You should place the car in park, turn off the vehicle and place tire blocks around all tires to prevent movement during jacking.
  2. Before lifting the car, it is best to loosen stubborn lug nuts while the tires are firmly fixed on the ground. A raised tire will have some give and rotate which can make fighting a lug nut all the more difficult. [1]
    Advertisement
  3. It is best to consult your vehicle's manual for the best placement on jack stands. However, it is typically the case that one jack point exists per wheel. Just be sure you are setting the jack on a solid and secure point on the frame as opposed to paneling.
    • Jacking on the paneling will not be able to support the weight of the car and will cause damage to the paneling as well as cause the jack to fall.
    • If you are unsure about jack points, check online for your model's manual or consult a mechanic.
    • The more jack stands, the better. Adding breeze blocks as a failsafe can also help make sure that if the car does move enough to come off a stand, you are still going to be safe. [2]
  4. Once the car is securely raised, you can finish removing the lug nuts. You should remove all the tires before cleaning so that you do not have to repeatedly prepare and set aside your tools.
  5. It is not until you can access the rotors that you can truly know the condition they are in. Often, rotors can experience “lateral brake run-out” in which the rotor wobbles and unevenly wears down.
    • If the rotor has worn unevenly, it means the brake pads will not make contact evenly or as soon as expected. Although it may not be immediately apparent, over time it can be dangerous.
    • Rotors are expected to last between 40,000-60,000 miles for typical use, so be open-minded to the idea that your rotors may be worn or past their days of good use. They might need replacing.
  6. Build-up and rust can usually be removed by simple abrasion from a stainless steel brush. A “caliper brush” can also help to access more intricate parts of your rotor, if needed.
  7. If you are experienced enough to use a lathe, you can essentially grind away any more stubborn buildup. Be careful not to create unevenness when grinding as this will create the same issue as brake run-outs.
    Advertisement
Method 2
Method 2 of 3:

Cleaning Your Bike's Rotors

  1. Finding a solid, flat surface to flip your bike over onto will make working on the wheels much easier. With the wheels up in the air, you can better spin the tire and handle as you work.
  2. Following your brake cables, you will find the brake pads themselves. For disc rotors, the rotor will be what the brake pads are clamping on themselves when you press the brakes. [3]
  3. If your rotors just need a bit of touching up, you can clean them while they are still fully attached. However, if your recent ride has left them in a much messier condition, it may be required to take them off.
    • To remove your bike's rotors, you will need to consult the manual of your particular model.
    • Rotor removal usually entails removing the wheel, and then detaching the braking system and rotor itself depending on how it has been attached.
    • Make sure to pay attention to the order you remove things so that you can reverse it when reassembling.
  4. Brake rotors are very sensitive to certain products, so be sure NOT to use products like WD-40 or other oil-based cleaners. These can be even more difficult to clean off the rotor and make braking less effective or efficient. [4]
    • Spray the rotor with your can of brake cleaner, per the can's instructions. If using soap and water, spray or dip a rag into the solution and wipe the entire rotor down.
    • Some brake cleaners simply require a good wipe down with an industrial towel after using the spray. Make sure to remove all the residue so that your brake pads will only be hitting the rotors - not greasy cleaner.
    • If you've used soapy water, use some clean water to rinse away the solution and then a towel to completely dry the rotor itself.
  5. If you've removed the rotor, reverse the steps you took to remove it and reassemble the brake fixtures. Tighten and align everything as the manual recommends. Then flip your bike back over, and you're ready to ride!
    Advertisement
Method 3
Method 3 of 3:

Dealing with Rust on Your Car's Rotors

  1. Most rust that builds up can easily be removed by regular usage. Find an empty parking lot or open road and travel at about 5-10 miles per hour. Press your brakes about a half dozen times with enough pressure to stop the car slightly more abruptly than normal driving. This will knock loose and rub away buildup. [5]
    • Make sure to do this in a safe, undisturbed location. You do not want to be in the way of traffic or create the potential for an accident.
  2. Another option is to remove the tires as you would to clean your rotors with a steel brush. Spray the rotors with WD-40, or a similar penetrating oil, and let it set for 24 hours. Then use a very light, fine grain sanding paper to wipe away the dissolved material. Wipe clean with a rag to remove any additional oil or residual. [6]
    • There are also a number of products on the market to use after cleaning a rotor to prevent further buildup. This can help offset the next time rather extensively or altogether, depending on driving conditions.
  3. As with damaged or worn rotors, often a rotor has become too old and rusted to serve its intended purpose safely. Although a pricier solution than replacing a tire, you sometimes need to face the facts and choose the safest option.
    Advertisement

Community Q&A

Search
Add New Question
  • Question
    When do I replace the rotors?
    Ryan Bacigalupi
    Community Answer
    Using a micrometer, measure the thickness of the rotor. You can look on the hat of the rotor and there will be a measurement displayed for the minimum thickness. Keep in mind that when machining a rotor, typically a total of four thousandths of an inch are removed (2 from each side), so if you are going to be less than the minimum printed on the rotor, it's time to replace. Note: most repair facilities these days do not like to resurface rotors. This is not only due to laziness and the facility wanting to make more money, but also because most facilities do not want to hear about many brake noise concerns that come with the process of machining.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 5
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit

      Advertisement

      Warnings

      • If you are unsure about wearing on your rotors, consult a digital caliper or get a qualified mechanic to check.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Make Coffee
      How to
      Become Taller Naturally
      How to
      Improve Your Alexa Ranking
      The Best Couples Halloween Costumes for 2021
      How to
      Slim Your Face
      How to
      Start a Vegetable Garden
      How to
      Reduce Plastic Use
      How to
      Make Homemade Pasta
      How to
      Find Things You Lost
      How to
      Be a Cholo
      How to
      Organize Your Schedule
      How to
      Iron
      How to
      Do Drywall Repair
      How to
      Dress for a Night at the Casino
      Advertisement

      References

      1. ↑ https://www.bridgestonetire.com/tread-and-trend/drivers-ed/how-to-change-a-flat-tire
      2. ↑ https://www.sgs-engineering.com/help-advice/how-to-use-axle-stands/
      3. ↑ https://www.liv-cycling.com/global/campaigns/how-to-fix-squeaky-disc-brakes/20209
      4. ↑ http://www.cyclingweekly.com/news/product-news/disc-brake-maintenance-311205
      5. ↑ https://www.drbeasleys.com/blog/2012/07/26/remove-orange-rust-from-rotors/
      6. ↑ https://www.scienceabc.com/pure-sciences/remove-rust-tools.html

      About this article

      Article Summary X

      Cleaning your car’s rotors can take a couple of hours, but if you have mechanical experience, it should be a relatively simple job. First, you’ll need to jack your car up, take off its wheels, and remove the tires. Once the tires are off, you can inspect the rotors to see if they need to be cleaned. Or, if they’re too worn down, you might need to replace the rotors. Use a stainless steel brush to clean them. If you have experience using a lathe, you can also use this to grind away any stubborn buildup around the rotors. If you spot rust on the rotors, spray them with a multi-use lubricant and sand them lightly with fine grain paper. For more tips, including how to clean the rotors on your bike, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 51,115 times.

      Did this article help you?

      Advertisement