PDF download Download Article PDF download Download Article

Soot from a house fire or even a fire in a fireplace can leave your favorite furniture with unsightly stains. The best method to remove this soot will vary depending on the material, but with a few tricks, everything from your wood furnishings to your leather- and cloth-upholstered couches will be looking as good as new.

Method 1
Method 1 of 4:

Cleaning Finished Wood

PDF download Download Article
  1. These will pick up much of the dry soot that you’ll want to get rid of before starting to clean deeper into the wood. [1]
    • HEPA stands for high efficiency particle arrestance. HEPA vacuums will be marked as such on their packaging or in their owner’s manual. Soot and smoke can leave behind dangerous particles in the air, and HEPA vacuums will pick up more particles than regular vacuum cleaners.
  2. Wipe the sponge across the soot in straight lines until the surface of the sponge turns black. Turn it over and use another side until all sides are black, then carefully shave off the surface of the sponge using a knife to expose a new, clean layer to clean with. This will ensure that you don’t scrub the soot back into the wood. [2]
    • Scrub gently. Pressing too hard could embed the soot particles into the wood grain.
    • Make sure to use a dry sponge, which will pick up loose soot without rubbing it into the wood, rather than a sponge meant to be used with water.
    Advertisement
  3. Run your finger over the surface of the soot. If it smears, the wood has been affected by oily smoke. Closely follow the directions on your wood cleaner and use it to clean the surface of the wood with a cotton rag. You can also use Murphy Oil Soap. [3]
  4. 0000 grade steel wool will remove tougher residue. Scrub gently in the same direction of the wood grain in order to preserve the finish of the wood. [4]
    • Determine the direction of the wood grain by looking closely at the small lines in the wood. The direction that they point will be the direction of the grain.
  5. If oily soot remains on the wood, dilute a small amount of degreaser in a large bowl or bucket of water and spread it over the surface of the wood. Rinse well with a wet cloth and dry gently with a soft towel. [5]
  6. Rub a bit of polish onto an old cloth or paper towel and rub it gently into the wood. [7]
  7. Advertisement
Method 2
Method 2 of 4:

Removing Soot from Unfinished Wood

PDF download Download Article
  1. Look for a spray created specifically to deodorize the pervasive smell of smoke and mist it lightly over the surface. [8]
  2. If possible, use a HEPA vacuum for a deeper clean. Hold the hose slightly above the wood and run it over the sooty areas. This will pick up much of the loose soot, as well as smaller particles that get into the air. You can also use a lambswool duster. [9]
  3. Wipe straight across the surface of the wood and turn the sponge over when one side turns black. Carefully cut away blackened parts with a knife to expose new, clean layers to use. [10]
  4. Dilute a small amount of degreaser in a large amount of water and use a pump-up sprayer or spray bottle to spray it evenly onto your wood. Wipe the surface with a nylon brush after you’ve applied the solution. Rinse the surface with water to clean off the product. [11]
    • You can also use old, clean window spray bottles or any other empty spray bottles you have around the house to apply the degreasing spray. Make sure to clean the bottle thoroughly with soap and water after you’ve finished spraying.
  5. Unfinished wood is more sensitive and easily stained by soot than finished wood. If you can’t remove the soot by other measures, sand the stain away with fine grit sandpaper. [12]
    • Do not use sandpaper on finished wood, as it will remove the finish.
    • Sandpaper typically doesn’t work on heavy stains that extend deeply into the grains.
  6. If your wood furniture still smells smoky or looks stained, call a professional furniture cleaner for a consultation.
  7. Advertisement
Method 3
Method 3 of 4:

Cleaning Leather Upholstery

PDF download Download Article
  1. Hold the vacuum attachment just above the surface of the leather to avoid rubbing the soot into the upholstery. [13]
    • Feel free to use a HEPA vacuum if you want, but it’s not mandatory.
  2. Dampen the cloth and apply a small amount of soap, rubbing it to a slight lather. [14] Gently run it across the leather surface, being careful not to scrub too hard and work the soap into the leather. Use a clean, damp rag to wipe off the leather.
    • Condition the leather afterwards with a leather conditioner. Apply a small amount on a rag, reapplying as necessary, and gently rub a thin, even coat onto the surface of the leather. Let it absorb for at least two hours, or overnight if possible. [15]
  3. Mix about a couple spoonfuls of vinegar in a medium-sized bowl of water and stir. Dip a cloth into the mixture and run it over the surface of the leather, then rinse it with a clean, damp cloth. [16]
  4. Baking soda is very good at soaking up smoky smells, so sprinkle a light, even layer over your leather upholstery and leave it overnight. Vacuum the baking soda with a vacuum hose the next morning, being careful not to touch the hose to the surface. Repeat if necessary. [17]
  5. If the smell and soot stains persist, call a restoration cleaner and ask what options are available to you. [18] Steam cleaning from a professional, for example, can save heavily-damaged leather that you can’t salvage on your own. [19]
  6. Advertisement
Method 4
Method 4 of 4:

Cleaning Cloth Upholstery

PDF download Download Article
  1. Avoid using the flat brush attachment, as this could embed the soot deeper into the fabric. [20] Hold the nozzle slightly above the surface and directly above the soot stains. [21]
    • Feel free to use a HEPA vacuum if you want, but it’s not mandatory.
  2. Let it sit for 24 hours, then vacuum it and repeat as necessary. The baking soda will absorb the smoky odor. [22]
  3. You may be able to throw them in the washing machine on a cold cycle, but be sure to read the tags or instructions to see if you need to take any special care. Use a liquid detergent followed by a combination of powder detergent and bleach if necessary. [23]
    • You may need to wash these coverings several times before the soot comes out completely.
  4. Follow the product directions closely and lightly spray across the surface of the upholstery. Rinse with a damp cloth. [24]
  5. Call your local upholstery cleaners and ask for their recommendations, or get in touch with your dry cleaners to see if your cloth upholstery can be brought in for a deep cleaning.
  6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Which cleaner is suitable for removing grease?
    Ashley Matuska
    Professional Cleaner
    Ashley Matuska is a Professional Cleaner at the Founder and Owner of Dashing Maids in Denver, Colorado. Ashley has over seven years of experience in the cleaning industry. She and her team specialize in offering sustainable deep cleaning and maintenance cleaning services. She received a BS in Biology and Sociology from Indiana University.
    Professional Cleaner
    Expert Answer
    Citra Solv is a good cleaner for removing grease. It is natural, has a pleasant smell, and cleans well.
  • Question
    How do I get smoke stains out of an upholstered Victorian sofa?
    Community Answer
    Ammonia or even Windex with ammonia will work. The ammonia will break down the smoke film and particles. Only apply it to a surface you've turned so it's vertical. This way the water and ammonia mixture will ride the finish fabric and run down to the floor or towel or wet-dry vacuum with the debris. Any bag-less vacuum can handle this minimal amount of liquid.
  • Question
    How do I clean soot off white cloth furniture and white shag carpet from a blowtorch repair of an air conditioner?
    Community Answer
    Use a vacuum cleaner and/or a damp cloth. Then use a conditioner to restore moisture and keep the leather soft.
Ask a Question
      Advertisement

      Tips

      • Deal with soot as soon as possible. The sooner you can remove soot from your furniture, the more loose soot there will be. Loose soot can be brushed or vacuumed off, but soot that works its way into wood and fabric is much more difficult to remove. The longer soot sits, the further into your furniture it will sink.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Cover uncontaminated areas with sheets of plastic to avoid getting the soot onto clean surfaces.
      • Wear disposable gloves, eye goggles, and a face mask to protect your skin, eyes, and lungs, respectively. The chemicals inside the soot and the chemicals inside various cleansers may cause irritation. Wear clothes that you don’t mind getting dirty in.
      • Be aware that many pieces of furniture may be permanently damaged if treated in the wrong way. If you are uncertain about whether or not you can safely treat a piece of furniture, it’s in your best interest to have it professionally cleaned from the start.
      Advertisement

      Things You'll Need

      • Vacuum cleaner
      • Dry chemical sponge
      • Sharp knife
      • Water
      • Degreasing product
      • Fine grain sandpaper
      • Washing machine
      • Terry cloth or microfiber rags
      • Leather cleaner
      • Vinegar
      • Baking soda
      • Leather soap
      • Leather conditioner
      • Deodorizing sprays
      • Plastic sheets

      About This Article

      Thanks to all authors for creating a page that has been read 87,428 times.

      Reader Success Stories

      • Sandra Wallace

        Jul 12, 2016

        "Each tip was very helpful and I was happy to contribute also. Thank you, wikiHow!"
      Share your story

      Did this article help you?

      Advertisement