Download Article
Download Article
Removing smudges and grime is a regular part of iPad upkeep. This guide will show you how to properly clean your iPad's screen using a microfiber cloth or lens wipe.
Steps
-
Make sure your iPad is completely unplugged and press the "Sleep" button on the top of your iPad or turn your iPad off completely. Remove any additional external cords and/or electronics that may still be connected to the iPad.
-
If you have it, remove your iPad Cleaning Cloth from its case. The Cleaning Cloth is the black microfiber cloth that came with the iPad packaging. Briskly shake the cloth in the air to remove any loose particles from the microfiber.Advertisement
-
Check your iPad's screen for any debris or large particles. You don't want to accidentally turn the debris into an abrasive by rubbing it over the screen.
-
If necessary, use compressed air to blow off any debris to avoid scratching your iPad's screen.
- Note: if your compressed air produces patches of frozen air, be careful to avoid getting any moisture into one of the iPad's openings, in particular, as well as on the screen itself.
-
Place your iPad Cleaning Cloth on your iPad's screen. If you don't have the Cleaning Cloth that came with the iPad, you can also use:
- Any microfiber cloth
- Any lens cloth you might use on your glasses
- Any soft, lint-free cloth
- Do not use: cloths, towels, paper towels, or any similar items on your iPad. These damage the screen of the iPad. [1] X Research source
-
Gently rub the iPad Cleaning Cloth in a circular motion until the screen is clean.
-
Inspect for any remaining patches of oil or grime. You will see that with just a few circular strokes, your iPad will be shining like new!
-
Repeat after every use or as needed. This will help to keep your iPad clean and clear of fingerprints and smudges.
-
Avoid using the following items to clean an iPad. iPads have an oleophobic coating on the screen, which is sensitive and only requires a fine cloth to clean. The following [2] X Research source items will damage the oleophobic coating if used to clean the iPad:
- Window or household cleaners
- Aerosol sprays
- Solvents
- Alcohol
- Ammonia
- Abrasives
Advertisement
-
Consider buying an effective case and cover. The market is flooded with iPad cases; they're everywhere you look, making the decision of which one to buy even harder. Here are some general tips you can use when searching for an iPad case:
- Get something form-fitting that doesn't impede the use of the device. You want something that will act as a kind of second skin to the iPad, but a skin that doesn't make using the iPad hard or cumbersome.
- Unless the products fit extremely well, stay away from leather cases. Leather cases are pretty and make the iPad something to behold, but they aren't form-fitting, letting loose dust and grit get between the case or cover and the iPad itself.
-
Clean your iPad regularly. You don't have to clean your iPad after each and every use, but if you use it frequently, giving it a quick minute of your undivided cleaning attention will ensure that the iPad lasts well into its glory years, smudge- and grime-free.
-
Never spray any liquids directly onto the iPad. Moisture + iPad opening = disaster. As a general rule, try not to use liquids when you clean the iPad to preserve its oleophobic coating.
- If you feel like you must use a liquid to clean the iPad, go for something like the iKlenz Cleaner Solution. This kind of solution repels dust and kills bacteria as well. If used properly, this cleaning liquid should also give a streak-free shine.
Advertisement
Community Q&A
Search
-
QuestionWhat do I do if water gets inside of it?Community AnswerYou would have to replace the parts due to water damage. It's around $140 for a deep clean. If you have a warranty, then take it to an Apple store and see what they say.
-
QuestionHow do I remove dust inside the iPad's speaker?nicholasz2510 Gaming, Travel, and MusicCommunity AnswerTry using a compressed air can on it. This should blow out most debris. You can also use this trick on the charger hole, earbud plug, and other places.
-
QuestionHow do I clean an iPad without leaving streaks?Community AnswerUse a non-synthetic napkin and clean in a circular motion. You can additionally use some water.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Keep an iPad Cleaning Cloth with your iPad at all times to wipe the screen after each use to avoid build-up of fingerprints and debris.Thanks
- Be sure to wash your iPad Cleaning Cloth as needed or after heavy use.Thanks
- Make sure your iPad is turned off or asleep to avoid accidentally opening apps or moving things around.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Do NOT get your iPad wet.Thanks
- Do NOT use rubbing alcohol, ammonia-based window cleaners or any other cleaning spray or chemicals on your iPad's screen, it will remove the special coating and reduce the responsiveness of the device.Thanks
Advertisement
Things You'll Need
- Can of Compressed Air (only needed for loose debris)
- Microfiber cloth
About This Article
Article Summary
X
To clean your iPad, start by unplugging your device and putting it in “sleep” mode or turning it completely off. If there's any debris or large particles on the screen, blow them off with compressed air so you don't scratch the screen when you wipe it. Then, gently rub a microfiber cleaning cloth in a circular motion until the screen is clean. In order to keep your iPad clean, consider keeping it in a form-fitting case and cover. To learn how to avoid damaging the coating on your iPad screen, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 454,884 times.
Advertisement
