PDF download Download Article PDF download Download Article

Granite is a popular material used for sinks today, as it adds both durability and elegance to your kitchen. Sinks made from granite are often covered with a sealant that protects the natural stone and materials from scratches and erosion. When cleaning a granite sink, whether you’re removing hard water stains, tackling tough stains, or just doing regular maintenance, you need to use gentle methods so as not to damage or discolor the sealant or surface.

Method 1
Method 1 of 3:

Removing Hard Water Stains

PDF download Download Article
  1. Granite, like all natural stones, must be cleaned with pH-neutral cleaners and non-abrasive pads or rags. Avoid using CLR, lemon, vinegar, glass cleaner, steel wool, or harsh scrubbers. [1] Since hard water stains and mineral deposits are resistant to pH-neutral cleaners, it's recommended to use a scum and mineral deposit remover for granite . Be careful, as many products for removing hard water are NOT safe for granite.
  2. Follow the product instructions, applying it to the target area. Meanwhile, dampen the scrubbing pad with hot water. If you are using a neutral product such as dish soap for removal, this task will require more elbow-grease, since you will be relying on friction. For this reason, we recommend using a scum and mineral deposit remover for granite.
    Advertisement
  3. Rub the scrubber over the hard water stains/mineral deposits, and any spots that look grimy or filmy, completely removing the build-up. You can wipe the whole sink down with this scrubber for a more thorough cleaning.
  4. Use a spray hose, a cup, or just your cupped hands to pour water over the targeted areas, rinsing the residue away. You can also wipe it with a clean, dampened sponge. Be sure to rinse completely, removing any leftover product residue.
  5. Microfiber is gentle enough to be used on granite without damaging it, but any soft towel or cloth will do. Be sure that you’ve gotten the sink completely dry, since leaving water may cause minerals to accumulate, re-creating the issue.
  6. If these steps did not work, apply the methods once more. If the issue persists, the underlying cause of the staining may be from "etching." Etching most often occurs after using abrasive products such as lemon juice, vinegar, CLR, or sandpaper/harsh scrubbers. [2] For etching assistance, it's best to obtain professional advice. Free support lines such as Supreme Surface tend to offer personalized advice for such issues.
  7. Appearance-based effects of etching can be temporarily hidden by mineral oil. This provides a short-term solution until a complete solution is found. Begin by finding a clean, dry cloth or rag and pour a few teaspoons of olive oil or mineral oil onto a small section of it. [3] Try not to ball up the cloth so much that it begins to absorb the oil and spread it through the cloth. The oil should sit in a relatively concentrated spot so that it can be transferred to the granite.
  8. Wipe the sink thoroughly with the cloth until you’ve distributed a thin, even layer of oil over the granite. Allow it to sit for about a minute before you attempt to wipe it away.
  9. Use the clean part of the cloth, or just get a new one, and buff any excess oil off the sink. The granite will be shiny but should not feel slick when you run a finger over it. Continue to wipe it with a clean cloth if your finger comes away with oil on it.
  10. Advertisement
Method 2
Method 2 of 3:

Removing Tough Stains

PDF download Download Article
  1. Both of these products can be purchased at home improvement or hardware stores, and can be combined to create a "poultice." Follow the directions on the whiting powder packaging to mix it with the proper amount of hydrogen peroxide.
    • The resulting mixture should be a thick paste, almost the consistency of peanut butter.
    • Some examples of whiting powder include powdered chalk, white molding plaster, and talc. [4]
  2. Use a putty knife or an old wood or plastic spatula that you no longer need to do the application. The layer of paste you apply to the stain should be approximately half an inch (about 1.25 cm) thick. [5]
  3. Secure the plastic wrap down on each edge with a piece of tape. This will allow the paste to fully absorb and lift the stain.
  4. Let it sit for at least 24 hours. Occasionally, this may take up to 2 days. This period can fluctuate depending on the directions outlined on the whiting powder product.
  5. Use a very blunt scraping tool to remove the dried paste so that you don't scratch the stone. Or just use a soft sponge or paper towel to remove as much of it as you can, and then throw it away. Do not attempt to wash the all of the paste down the drain, as it may clog the pipes.
  6. Remove any remaining paste residue using a damp sponge or by pouring or spraying water over the area where the paste was. [6]
  7. If the stain has not been removed from your granite sink after the first try, you can go through the process again. It may take up to five times for this process to fully lift stubborn stains. [7]
  8. Advertisement
Method 3
Method 3 of 3:

Maintaining a Clean Sink

PDF download Download Article
  1. Rinsing your sink can prevent food and other debris from drying and hardening onto the granite surface, and wiping it dry can protect your sink from any minerals that exist in your tap water.
    • Keep a microfiber towel or other soft cloth near your sink so that you can easily wipe it down after using it.
    • The use of ioSeal-containing treatments can also be used for additional protection and enhancement.
  2. Granite is a porous stone, so the sooner you clean up a stain the better. [8] Try to blot at a fresh stain rather than rubbing it so that you don’t spread it to a larger area. [9]
    • Clean alcohol and citrus spills immediately, since these can dull or etch the granite’s surface.
  3. After ensuring that your countertop has been initially sealed, be sure to follow up by using ioSeal-containing products for simple maintenance, or by re-sealing when necessary. How often you need to re-seal varies depending on factors such as color, porosity, and whether the sealant has been damaged by acidic products. Optionally, with consistent use of ioSeal-based treatments, you can reduce the need to re-apply sealers. Recommendations will vary.
  4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you get stains out of a granite composite sink?
    Bridgett Price
    House Cleaning Professional
    Bridgett Price is a House Cleaning Professional based in Phoenix, Arizona. She has over 8 years of experience in the industry and is the Co-Owner of Maid Easy, a maid service company servicing the Phoenix, Arizona metropolitan area witih over 17k professional cleanings under its belt. Maid Easy was featured on CNBC's 'Made It!' program and was voted as The Best of The Desert - Residential Cleaning Service by AZCentral. She holds a Master of Management from the University of Phoenix, specializing in digital and traditional marketing.
    House Cleaning Professional
    Expert Answer
    I recommend creating a paste out of hydrogen peroxide and whitening powder. You can mix them together in a disposable container, such as an old food storage container you no longer need.
  • Question
    Can I use baking soda on a granite sink?
    Marcus Shields
    House Cleaning Professional
    Marcus is the owner of Maid Easy, a local residential cleaning company in Phoenix, Arizona. His cleaning roots date back to his grandmother who cleaned homes for valley residents in the 60’s through the 70’s. After working in tech for over a decade, he came back to the cleaning industry and opened Maid Easy to pass his family’s tried and true methods to home dwellers across the Phoenix Metro Area.
    House Cleaning Professional
    Expert Answer
    Sure! Baking soda is actually a great option to remove hard stains on your granite sink!
  • Question
    Do granite sinks scratch?
    Community Answer
    This depends on the type of granite that you are working with. Natural granite will require a special sealer to protect it; without this sealer, it will scratch. Composite granite, however, is resistant to scratching and does not require a sealer.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      • If you are unsure about whether certain cleaning methods or solutions will be safe to use on your granite sink, contact the manufacturer of your sink. Usually, the manufacturer can provide you with recommendations on safe treatments for the granite.
      • To restore shine to your granite sink when it no longer gleams, purchase a commercial granite cleaning solution, or a solution intended for natural stone, then use the product as directed on the packaging.
      • Always use pH-neutral products on your granite sink.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You'll Need

      • Scum & Mineral Deposit Remover for Granite
      • Soft sponge or microfiber towel
      • Olive or mineral oil
      • Powdered whiting product
      • Hydrogen peroxide
      • Plastic wrap
      • Tape

      References

      1. Marcus Shields. House Cleaning Professional. Expert Interview. 22 September 2019.
      2. Marcus Shields. House Cleaning Professional. Expert Interview. 22 September 2019.
      3. https://www.angi.com/articles/how-clean-your-kitchen-sink.htm
      4. http://granite-countertop-info.com/granite-stain-removal-guide/
      5. Bridgett Price. House Cleaning Professional. Expert Interview. 23 May 2019.
      6. Bridgett Price. House Cleaning Professional. Expert Interview. 23 May 2019.
      7. http://granite-countertop-info.com/granite-stain-removal-guide/
      8. Marcus Shields. House Cleaning Professional. Expert Interview. 22 September 2019.
      9. http://granite-countertop-info.com/granite-care-your-owners-manual/
      1. Marcus Shields. House Cleaning Professional. Expert Interview. 22 September 2019.
      2. Marcus Shields. House Cleaning Professional. Expert Interview. 22 September 2019.

      About This Article

      Article Summary X

      To clean a granite sink, start by wiping down the sink using a non-abrasive scrubbing pad dampened with hot water and mild dish soap. Then, rinse the sink with clean water or wipe it with a damp sponge. Next, dry the sink using a soft cloth, like a microfiber towel, to ensure that you don’t scratch the granite surface. Once the sink is completely dry, restore the shine to the granite by rubbing the sink with a few teaspoons of olive oil poured onto a clean cloth. Let it sit for 1 minute, then use another clean cloth to wipe away the excess oil. To learn more, including how to remove tough stains with hydrogen peroxide and whiting powder, read on.

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 216,373 times.

      Reader Success Stories

      • Anonymous

        Jul 26, 2016

        "Easy to understand instructions even for a woman like me."
      Share your story

      Did this article help you?

      Advertisement