Download Article
Clean your screen without damage
Download Article
Do you need to clean your MacBook Pro screen? Over time, your Mac's display can become smudgy or dirty. You'll need to take care when cleaning your MacBook Pro screen so you don't scratch or damage it. This wikiHow article will teach you four effective ways to clean the screen on your MacBook Pro safely.
Things You Should Know
- Use a soft, dry, lint-free cloth to wipe the screen. Dampen it with just a little bit of water to get tough smudges out.
- Avoid using abrasive cloths, aerosol sprays, solvents, and household cleaners containing hydrogen peroxide or ammonia.
- Never spray liquid or water directly onto the screen.
Steps
-
Shut the computer down. Turn the MacBook Pro off and detach the power adapter from the computer.
- Detaching the power adapter is not essential if you are only using a dry cloth to clean the screen. However, it is still advisable since the friction produced by the cloth could still interact with and damage the adapter.
- Is the rest of your laptop dirty? There are also ways you can safely clean the keyboard and other parts of your laptop.
-
Buff away prints with a microfiber cloth. Carefully polish the screen with a microfiber cloth, moving across the entire screen in small circles. Apply steady yet slight pressure as you work, but do not use excessive force.- Optical microfiber cloth is ideal, but just about any cloth will do if it is soft, clean, lint-free, and static-resistant. Stay away from abrasive cloths, such as dish towels, and paper towels.
- You may need to buff the screen for five minutes or more before all fingerprints and smudges have been removed.
- Hold the computer by the upper edge or by the keyboard to prevent yourself from accidentally re-smudging the screen.
Advertisement
-
Shut the MacBook Pro down. Turn the computer off and unplug the power adapter.
- You can use these methods to clean other MacBook and iMac model screens as well.
-
Lay the screen on its back. Place the screen face-up with the keyboard sticking up in the air. This position will prevent liquid from dripping down into the keyboard. [1] X Research source
-
Dampen a soft cloth with water. Apply a little water to a soft microfiber cloth, making the cloth barely moist.
- Only use a soft cloth. A soft, clean, static-free, fiber-free cloth works best, but most non-abrasive cloths will also work well. Do not use paper towels, dish towels, or other rough cloths.
- For best results, use distilled water instead of tap water. Tap water contains minerals, and some of these minerals can be conductive. As a result, tap water is more likely to cause a short circuit than distilled water.
- Do not drench the cloth in water. A soaked cloth is more likely to drip excess water into your MacBook Pro, which could cause severe damage to your computer. If you accidentally use too much water, wring the cloth out well until it is only slightly moist.
- Do not, under any circumstance, spray water directly onto the screen of the MacBook Pro. This significantly increases your odds of getting water into the machine and causing permanent damage. Apply water directly to the cloth, not the screen.
-
Wipe down the screen. Use a separate soft, static-free, non-abrasive cloth to wipe the screen from side to side and top to bottom, working in small circular buffing motions. Apply sturdy but slight pressure to the screen as you work. Dry the screen immediately after wiping for a streak-free finish.
- Hold the screen toward the very top or very bottom to avoid re-smudging it as you work.
- You may need to pass over the screen multiple times before all the smudges have been removed. You may also need to re-dampen the cloth as you work, depending on how many passes over the screen you need to make.
Advertisement
-
Shut down the computer. Make sure that the MacBook Pro is turned off before proceeding. Detach the computer from its power adapter.
- You should not proceed without powering down your MacBook Pro. Its internal components could get damaged if exposed to the wet cleanser. You could also get a slight shock if reaches these electrical components as you work, especially if the power adapter is plugged in.
-
Lay the screen on its back. Place the screen face-up with the keyboard sticking up in the air. This position will prevent liquid from dripping down into the keyboard.
-
Spray a little LCD or plasma cleanser on a microfiber cloth. Spray a small amount of this cleaner onto your soft cloth. Do not drench the cloth. It should only feel a little moist to the touch, and you should not be able to squeeze any liquid out of it. [2] X Research source
- Only use soft, clean, lint-free, and static-free cloths. Lens cloths work especially well, but any microfiber cloth will usually do the trick. Avoid paper towels, dish towels, terry cloth towels, and other abrasive fabrics.
- Use a cleaner specifically sold for use with LCD screens. Do not use all-purpose cleaners, alcohol-based products, bleach, aerosol sprays, solvents, or abrasives. All of these products could seriously damage the screen. In extreme cases, the screen may even break completely.
- Do not spray the cleaning solution directly on the screen. Doing so increases the likelihood of getting moisture into the openings at the bottom or along the sides. Moisture should not be allowed through these openings since it can short out your computer if it gets inside.
-
Wipe the screen using the cloth. Use a separate dry, clean, static-free, and fiber-free cloth. Pass the cloth over the MacBook Pro screen, working either from top to bottom or from side to side. Buff the screen in small circular motions, applying steady but light pressure.
- Hold the computer screen near the very top or very bottom to reduce the risk of accidentally smudging it as you work.
- Continue buffing the computer screen as necessary until all smudges are gone, reapplying the cleaning solution as necessary. This may take several passes over the screen and several minutes to complete.
Advertisement
-
Turn off the MacBook Pro. Shut down the computer before you do anything else. Unplug the power adapter before continuing on.
- Moisture from the wipes can get into the computer, even if you work carefully. If this happens, it is important that the power adapter has been previously removed. Prior removal of these electrical components will prevent them from getting damaged and will also prevent you from getting shocked.
-
Lay the screen on its back. Place the screen face-up with the keyboard sticking up in the air. This position will prevent liquid from dripping down into the keyboard.
-
Use a specially formulated electronic wipe. Use a wipe that is specifically designed to clean LCD screens. Wipe it across the entire screen, working from top to bottom or side to side. For best results, buff the screen using small circular motions while applying light but even pressure.
- Electronic wipes have just enough solution to clean the screen without soaking it. The solution used is also formulated to work safely with electronic products.
- Make sure that any wipes you use have a non-alcohol formula, since alcohol could damage the screen.
Advertisement
Community Q&A
Search
-
QuestionI cleaned my Mac Book Pro screen with ammonia and it's now cloudy. Apple support is no help. What should I do?Community AnswerTake it to a repair shop that isn't Apple support. You may need a new screen.
-
QuestionHow do you clean the actual cover to it?Korean4 animaljamCommunity AnswerYou should take a towel that is damp (not too wet) and just glide it against the cover and then dry it off with a dry towel.
-
QuestionCan I use eye glass cleaners to clean a computer screen?Community AnswerCheck the ingredients in the eye glass cleaner and see if it is comparable to that of the LCD screen cleaner to be sure.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- If your MacBook Pro starts malfunctioning after accidentally getting moisture on the inside, contact an Apple Authorized Service Provider or Apple Retail Store for help immediately. Under most circumstances, damage caused to the computer by liquid is not covered under the product warranty. [3] X Research sourceThanks
- You always need to be careful when using liquid to clean electronics, including AirPods . If any liquid gets inside, it can cause permanent damage that will cause your electronics to malfunction or not work.Thanks
- If you accidentally get moisture inside your MacBook Pro, power it off immediately and unplug it. Use a towel to dry up any standing water on the outside. Put it in a warm and dry area to sit for 72 hours or until it is completely dry to prevent water damage . Do not attempt to power it on until it is completely dry.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Microfiber cloth
- Water
- LCD cleaning solution
- LCD cleaning cloths or wipes
References
About This Article
Article Summary
X
!. Dampen a soft, clean, fiber-free, and static-free cloth with water.
2. Lay the MacBook Pro screen on it's black.
3. Wipe down the entire screen, applying light pressure. Make several passes if needed.
4. Dry the screen using a separate dry, clean, soft, fiber-free, and static-free cloth.
Did this summary help you?
Thanks to all authors for creating a page that has been read 756,454 times.
Reader Success Stories
- "Didn't want to ruin the screen or the computer so the instructions helped my confidence in getting the job done and getting it done right. Too "gunked up" for a simple polish. Small amount of water on a microfiber cloth and some elbow grease: success!" ..." more
Advertisement
"Didn't want to ruin the screen or the computer so the instructions helped my confidence in getting the job done and getting it done right. Too "gunked up" for a simple polish. Small amount of water on a microfiber cloth and some elbow grease: success!"
..."
more
