Download Article
Download Article
You may be a huge fan of your travertine shower’s stunning looks and durability, but how do you get rid of the soap scum and mineral deposits? Travertine’s texture comes from the small pores in the stone, which can make cleaning it challenging. However, it’s not nearly as difficult to care for as it may seem. In this article, we’ll walk you through the steps when it comes to routine and deep cleanings alike so that you can keep your shower looking pristine!
Steps
-
Clean your shower after you use it. The running water in your shower loosens surface dirt and softens soap residue on your travertine tiles. [1] X Research source For optimal results, tackle shower cleaning after your shower has primed the tiles for you.
-
Spray your wet tiles with a non-acidic soap scum remover. Travertine, like all limestones, is extremely sensitive to acids. [2] X Trustworthy Source U.S. General Services Administration Independent U.S. government agency designed to support the basic functioning of the U.S. federal government. Go to source Use a non-acidic stone cleaner, such as Granite Gold Shower Cleaner or MB-3, and spray the travertine thoroughly from the top to the bottom. Let the cleaner sit on the stone for 10 minutes to begin dissolving any soap scum.
- Given travertine’s acid sensitivity, always avoid applying vinegars or other citrus cleaners.
Advertisement -
Use warm water to scrub the tiles. Fill a bucket with warm water, and begin scrubbing the tiles with it. Use a diamond-shaped brush to wash the entire top row of tiles, applying firm pressure to loosen soap scum. [3] X Research source Progress to the next highest row, methodically working your way to the bottom row. [4] X Research source This way, dirty water will run down on tiles you’ve yet to clean.
- Focus particular attention on any surface holes in the travertine when cleaning, as they can collect soap scum.
- A diamond-shaped brush makes it easy to clean your shower’s innermost corners easily, but any shape is fine.
-
Use a soft toothbrush to scrub grout. Spray your grout with the non-acidic cleaner you used on the tile, and scrub each grout line back and forth with an old toothbrush. [5] X Research source Focus your scrubbing on areas of mildew growth and discoloration.
- Many grout formulas contain acids and should not be used with travertine.
- If possible, use a toothbrush with softer bristles, as hard-bristled toothbrushes may etch the surface of the stone.
-
Remove hard water stains with fine steel wool. Be sure to choose 0000-grade steel wool, as it is very fine and shouldn’t scratch the tiles. Lightly buff away hard water stains with the steel wool.
-
Rinse the shower with warm water. Turn the shower on and rinse your newly cleaned travertine tiles with warm water. If there are any spots you can’t reach with the showerhead, fill your bucket up with clean water and rinse the tiles clean manually.
-
Dry your travertine with a clean towel. Use a towel to wipe down your travertine to remove any traces of stone cleaner. It may be helpful to open a window to dry the area more quickly.
Advertisement
-
Squeegee and wipe down your travertine after showering. Use a squeegee to remove excess water from the tile after showering. Then, use a towel to wipe your travertine dry to keep soap scum from building up over time. Plus, it’s easier to remove soap residue before it dries.
- Pay special attention to pools of water in corners and around edges.
- If you have a glass shower door, leave it open after showering to allow the water to dry.
-
Establish a regular cleaning routine. Soap scum can cause hard water deposits to accumulate on your travertine. To keep your shower looking its best, clean your travertine shower with non-acidic cleaner a once a week.
- If you have a detachable shower head, use it to rinse the tile with warm water after showering to remove soap scum.
- Creating a calendar reminder can help you remember to incorporate cleaning your shower into your household routine.
-
Clean travertine as soon as something spills. Whether it’s a colored shower gel or shampoo tinted to enhance hair color, when something spills on your travertine, clean it up right away. Certain bath products contain dyes, which can permanently stain your stone.
-
Inspect grout and tiles for damage. Bits of grout breaking off can scratch your travertine and trap dirt and grime. Cleaning is a great time to get up close and personal with your tile. Examine your grout and stone for cracks or chips. Be sure to replace chipped or broken tiles and have your grout touched up wherever necessary.
-
Get your travertine sealed once a year. Sealing your travertine makes the stone more resistant to damage from soap, grit and hard water. Have a stone professional seal your travertine once a year to keep it looking and functioning great.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Things You'll Need
- Non-acidic shower cleaner
- Diamond-shaped shower brush
- Toothbrush
- Water
- Towel
- Travertine sealant
Tips
- If you ever notice a small spot of paint on the Travertine, scrape it off with a razor blade and remove any residue with paint thinner.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
References
- ↑ http://www.bhg.com/homekeeping/house-cleaning/tips/how-to-clean-a-shower/
- ↑ https://www.gsa.gov/portal/content/111930
- ↑ http://www.bhg.com/homekeeping/house-cleaning/tips/how-to-clean-a-shower/
- ↑ http://cleanmyspace.com/the-secrets-to-maintaining-high-end-finishes-in-your-home/
- ↑ http://www.stylemepretty.com/living/2010/04/13/how-to-clean-grout/
About This Article
Article Summary
X
To keep your travertine shower clean, spray a non-acidic stone cleaner onto the travertine after you've finished showering, because the water will have already loosened the soap scum. After the cleaner has been on for 10 minutes, start scrubbing the tiles with a brush and warm water. For the grout, use an old toothbrush to scrub between the tiles. To finish, remove any hard water stains by using fine steel wool, then rinse your clean tiles with warm water from the shower head. To learn how to protect your travertine, including why you should clean up shampoo spills immediately, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 83,326 times.
Advertisement
