Download Article
Keep your Trex deck pristine with these simple cleaning solutions
Download Article
Trex decks, also known as composite decks, are popular because they are relatively low-maintenance and require less care than wood decks. No outdoor product is maintenance-free, however. Dirt, grime, and mold can still form on composite decks, and they require periodic cleaning to prevent this buildup. With the right ingredients, you can remove the dirt, food, grease, oil, and mold that builds up on Trex and keep your deck looking new for years.
Steps
-
Spray down the deck with a hose. Newer dust, dirt, pollen, and debris that’s piled on the deck’s surface should flow off with just a good rinse. Only the caked-on debris will remain after this. [1] X Research source
- Set the hose nozzle to the “spray” setting so there’s some power behind the spray. This helps remove debris.
- If you use a power washer instead of a garden hose, the model should be less than 3,100 psi to avoid damaging the deck. [2] X Research source
-
Mix a soap and water solution for caked-on debris. Debris can hide in the ridges and patterns on a composite deck, and this requires some scrubbing with a soapy mixture. First fill a bucket with warm water. Then mix in 2 tablespoons (29.5 ml) of ammonia-free dish soap. Stir or shake the mixture so suds form. [3] X Research source
- It’s important to use ammonia-free dish soap so the soap doesn’t stain your deck or react with any other chemicals you may use for cleaning.
Advertisement -
Scrub the deck with a soft-bristle brush. Dip the brush in your soapy mixture and start scrubbing the ridges and patterns on your deck. Focus on these areas because dust and debris can hide in these spaces. [4] X Research source
- You can also get a soft-bristle broom, which will make cleaning the entire deck much easier on your back.
- Depending on the size of your deck, you may have to mix more soap solution during the cleaning process.
- Remove all caked-on debris, because this will form stains if left untreated.
-
Rinse the deck thoroughly with a hose. Complete the job with one final rinse from your hose. Remove all suds and bubbles to avoid staining the deck. [5] X Research source
- Leftover soapy water can form a sticky film on your deck. This could not only stain the deck, but it also attracts even more dust and debris. Save yourself future trouble by doing a thorough rinse.
-
Repeat this clean every 6 months. A semi-annual clean removes the dirt and debris that has accumulated on your deck throughout the year. This regular cleaning cycle helps prevent stains and imperfections from forming. [6] X Research source
-
Clean all food spills as soon as possible. The oil and grease in food can soak into the composite deck and stain it. Don’t let any food spills sit. Pick up the food immediately and carry out a clean as soon as possible. [7] X Research source
- After picking up all the food, you can follow the same cleaning steps to prevent oil and grease from staining your deck.
Advertisement
-
Get a composite deck cleaner for stained Trex. If stains have set in the composite deck, then you can get them out with a specialized cleaning fluid. Find a cleaning fluid approved for use on composite decks, ideally one that contains sodium hypochlorite. These are available at outdoor stores or on the internet. [8] X Research source
- Do not use any cleaning products that aren't approved for Trex, especially wood cleaners. Solvents and corrosive chemicals can stain and damage your deck permanently, and you could also void your warranty if you use unapproved chemicals.
- If you're unsure what to use, contact the manufacturer or installer of your deck and ask for a recommendation.
-
Sweep your deck clean. Removing all surface dirt and debris ensures that all the cleaning fluid makes direct contact with the deck. [9] X Research source
- Use a normal broom for this task, no need for specialized bristles.
- If dust or debris has accumulated in the deck's grid pattern, use a smaller brush and clean it all out.
-
Mix the cleaner with water in the spray applicator. All cleaning fluids mix with water for application, but the specific mixture varies depending on which product you use. Check the directions on the product and follow that mixture carefully. Mix the water and cleaner in the spray applicator you'll be using. [10] X Research source
- A hand pump sprayer is a simple applicator you could use. This tool has a large tank, so you can directly pour water and cleaning fluid into it. Remember to pump it several times before trying to spray.
- If you're using a pressure washer, it may have a compartment where liquid cleaner goes. In this case, pour the cleaner in here and connect the pressure washer to a hose. Remember to keep the pressure washer on a low setting.
-
Spray the cleaning mixture on the deck. Use a sweeping motion and cover the entire deck, even if just a few spots are affected by the stains. Cleaning fluids usually restore a composite deck to its natural color and brightness, meaning the deck will have an uneven color if you only apply it to one spot. [11] X Research source
- You should see suds while you apply the cleaner. If you don't see suds, check to make sure your power washer is working or you've used the right mixture.
- If you're using a pressure washer, keep the nozzle moving to avoid damaging the deck.
-
Let the cleaner sit for as long as instructed. All cleaning products should sit on the deck to soak in, but the length of time varies depending on which cleaner you're using. Carefully read all instructions and allow the cleaner to rest for the instructed time. [12] X Research source
- Instructions usually tell you to wait several minutes, ranging from 3 to 15 minutes.
-
Rinse the deck. After giving the cleaner enough time to soak in, rinse the deck thoroughly to avoid streaks or a sticky film. Use either your garden hose or your pressure washer without any cleaning fluid in it. [13] X Research source
- Angle your spray so all the suds flow off your deck. Don't let this mixture pool in one area, as it could stain your deck if it sits there.
-
Scrub areas that are still stained. If a full surface clean hasn't gotten rid of all stains, you can use the cleaning fluid and water mixture as a spot cleaner. Mix this cleaning solution in a bucket. Then dip a soft-bristled brush into this mixture and scrub the stained area. Rinse thoroughly after you're done. [14] X Research source
- Be careful with how hard you scrub. Composite deck is soft material, and you could wear away the surface with heavy scrubbing.
Advertisement
-
Pre-rinse the area with a hose. Focus on the areas where mold is forming. The pressure from a hose or power washer will remove some of the surface mold and make the cleaning process easier. [15] X Research source
- If you use a power washer instead of a garden hose, the model should be less than 3,100 psi to avoid damaging the deck. [16] X Research source
-
Mix a vinegar-water solution. Use a proportion of 2 parts vinegar to 1 part water for this mixture. Measure out your vinegar and pour it into a bucket, followed by the water. Stir or shake this solution so it mixes together. [17] X Research source
- For example, if you use 1 US quart (0.95 l) of water, then use 2 US quarts (1.9 l) of vinegar.
-
Pour the solution over the mold. Soak the entire area, making sure you haven’t missed any mold that might be hiding in the ridges on the deck. [18] X Research source
- Remember to pour this solution directly onto the mold.
- Depending on how much mold is on your deck, you may have to mix more of your vinegar-water solution to complete the job.
-
Sprinkle baking soda onto the area. Use a spoon or your fingers and apply baking soda to every place that you put the vinegar mixture. Spread the baking soda until you see it start reacting with the vinegar. You'll know because bubbles and foam will start forming. [19] X Research source
- Don’t be worried when the mixture starts bubbling and foaming when you apply the baking soda. This is a natural and harmless reaction.
-
Let the mixture sit for 20 minutes. This bubbling solution breaks down mold, but it takes some time. Allow a few minutes for the solution to work before disturbing it. This time lets the mixture react with the mold and break it down so it comes off easily. [20] X Research source
- 20 minutes is all you should wait, or the chemicals in the vinegar and baking soda could stain or damage the deck. Allow enough time for the solution to work, but not so much that you ruin your deck.
-
Scrub the area with a soft-bristle brush. After the solution has broken down the mold, scrubbing should remove any solid remnants. Use a firm, circular pattern to ensure you capture all remaining mold. [21] X Research source
- Scrub well in the ridges and pattern of the deck. Mold loves hiding in these creases.
-
Rinse the area thoroughly. If left alone, the vinegar-baking soda solution can stain your deck. Complete the job by removing any remaining cleaning solution or mold. [22] X Research source
- A thorough rinse will also remove any food sources for mold like dirt and grime. This prevents more mold from forming in the future.
Advertisement
Community Q&A
Search
-
QuestionHow do I remove candle wax from a trex deck?Community AnswerLay a clean rag over the wax spot and then press down with an iron set on a synthetic setting. The heat will melt the wax, and the rag will absorb it. Turn the rag and repeat until the spot is gone.
-
QuestionWhat kind of soap should I use?Community AnswerA basic car/rv/boat biodegradable soap is best because they are generally designed to come into contact with plastic and metal without damaging. Stay away from dishwashing detergents because they contain ammonia which gets into the pores of most composites. Also avoid cleaners containing sodium hypochlorite - these are highly corrosive to structural metal decking hardware such as galvanized or stainless steel joist hangers, nails and screws.
-
QuestionWe have hard water and the deck looks dull. Any advice?Deck GuyCommunity AnswerBuy an RV water purifier filter and use it when you rinse your Trex deck. I got mine for $29.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Warnings
- Make sure you use any chemical cleaning product(s) in accordance with its label directions, with lots of fresh air.Thanks
- Never sand or use a wire brush in an attempt to remove stains from Trex. This will cause permanent damage and can make your warranty invalid.Thanks
- Avoid using any corrosive chemicals like chlorine or bleach on a Trex deck. These can damage or stain the deck permanently.Thanks
Advertisement
Things You'll Need
Removing Simple Dirt and Spills
- Hose
- Spray nozzle
- Plastic bucket
- Soft-bristle brush or broom
- Dish soap
Using Specialized Cleaner for Deep Stains
- Composite deck cleaner
- Broom
- Spray applicator
Making a Mold-Fighting Mixture
- Hose
- Spray nozzle
- Plastic bucket
- Soft-bristle brush or broom
- Baking soda
- Vinegar
Expert Interview
Thanks for reading our article! If you'd like to learn more about cleaning decks, check out our in-depth interview with Ryan Santos .
References
- ↑ https://www.trex.com/trex-owners/care-and-cleaning/
- ↑ https://www.trex.com/trex-owners/care-and-cleaning/
- ↑ https://www.decks.com/how-to/13/how-to-clean-a-deck
- ↑ https://www.decks.com/how-to/13/how-to-clean-a-deck
- ↑ https://www.decks.com/how-to/13/how-to-clean-a-deck
- ↑ https://www.decks.com/how-to/13/how-to-clean-a-deck
- ↑ https://www.trex.com/trex-owners/care-and-cleaning/
- ↑ https://www.thisoldhouse.com/ask-toh/stained-trex
- ↑ https://youtu.be/RSLAL9Hq33c?t=56
- ↑ https://youtu.be/RSLAL9Hq33c?t=78
- ↑ https://youtu.be/RSLAL9Hq33c?t=102
- ↑ https://youtu.be/RSLAL9Hq33c?t=119
- ↑ https://youtu.be/RSLAL9Hq33c?t=140
- ↑ https://youtu.be/RSLAL9Hq33c?t=166
- ↑ https://www.decks.com/how-to/13/how-to-clean-a-deck
- ↑ https://www.trex.com/trex-owners/care-and-cleaning/
- ↑ https://www.decks.com/how-to/13/how-to-clean-a-deck
- ↑ https://www.decks.com/how-to/13/how-to-clean-a-deck
- ↑ https://www.decks.com/how-to/13/how-to-clean-a-deck
- ↑ https://www.decks.com/how-to/13/how-to-clean-a-deck
- ↑ https://www.decks.com/how-to/13/how-to-clean-a-deck
- ↑ https://www.decks.com/how-to/13/how-to-clean-a-deck
About This Article
Article Summary
X
To clean a Trex deck, start by mixing equal amounts of composite decking cleaner and water and using it to scrub down the deck twice a year. Once you’ve scrubbed away any dirt and grime, rinse the cleaner off with a hose or a power washer. For stains, first rinse the area with water to get rid of grease or oil on the surface. Then, spray a full strength cleaner on the spot and scrub it with a brush. When the stain is gone, rinse the cleaner off with water before walking on the deck. For tips on how to remove mildew and mold stains from your deck, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 258,862 times.
Reader Success Stories
- "Very well written and helpful."
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Very well written and helpful."
