Download Article
Download Article
Crackle painting is a technique used to give painted surfaces a worn and aged look. By applying a layer of glue or crackle medium between 2 layers of latex or acrylic paint, you can give almost any surface a faux finish. To get the best possible results, sand and prime your item before painting it. Enhance the distressed look with sandpaper and aging dust and protect the finish with a sealant.
Steps
-
Choose a decorative item or piece of furniture to crackle paint. Crackle painting works on many different surfaces and materials, such as ceramic and canvas. However, it typically looks most realistic on wooden pieces that naturally weather over time. Consider crackle painting an old rocking chair, a decorative crate, or a piece of wall art. -
Sand wooden items with 150-grit sandpaper. If you choose to paint a wooden object, get sandpaper that is 150-grit or finer from a hardware or home improvement store. Rub the sandpaper against the item’s surface to make it smoother for painting. [1] X Research sourceAdvertisement -
Wipe the item down with a damp cloth. Before painting, you’ll want to make sure your object is clean and free of any dirt. This is especially important for wooden pieces, since you’ll also need to get rid of any lingering sanding dust. Run warm water over a clean cloth for a few seconds and wring out the water. Wipe the entire surface of your item clean. [2] X Research source -
Apply primer to the item. Wait until the item is completely dry to the touch and then get out some paint primer and a paintbrush. Brush one coat of primer onto the item’s surface and allow it to dry fully. This should take somewhere between 1 and 3 hours. [3] X Research source- Any generic paint primer should work fine, but consider getting a wood primer if your object is wooden so that any cracks in the wood are properly filled in.
Advertisement
-
Choose and protect your workspace. Find a location to paint where there’s good ventilation, such as outside or in an open garage. Before getting the paint out, put down sheets of newspaper all over your work surface to keep it and anything else in the area from becoming damaged. -
Apply a semi-gloss acrylic base coat and let it dry overnight. After following the primer’s drying directions, choose an acrylic or latex paint to apply as a base coat. This can be any color you want, but it’s best to get a paint that’s semi-gloss or satin. Brush on the paint in the direction of the grain until the entire item is painted. Set the item aside to dry until at least the next day. [4] X Research source- This will be different than the paint you use for your top coat. Your top coat should have a flat or matte finish, which appears more saturated than semi-gloss or satin. [5] X Research source
- Additionally, the top and base coats should be contrasting colors, such as eggplant and aquamarine.
-
Brush crackle medium or school glue onto the object’s surface. Go to a craft store and either purchase a conventional crackle medium or white school glue, such as Elmer’s. Use a paintbrush to coat the item you’re painting in either the crackle medium or the glue. [6] X Research source- Crackle medium is more expensive than school glue, but both options typically provide good end results.
-
Apply thick layers to get big cracks and thin layers to get small ones. If you’re wanting to create large cracks, put big globs of glue or crackle medium onto your paintbrush before applying it to your object’s surface. Dip your paintbrush into the glue or crackle medium conservatively before applying it to your object’s surface if you want hairline cracks. [7] X Research source -
Let crackle medium completely dry, but don’t allow glue to dry. If you’re using a crackle medium, give it 1-4 hours to dry. Otherwise, move onto painting your top coat immediately. For the crackling to work correctly, the glue must be tacky when the top coat is applied. [8] X Research source -
Choose a flat latex or acrylic paint for the top coat. Pick a color that contrasts well with your base coat color to get the best visual effects. For example, if your base coat is bright yellow, you might consider choosing navy blue as a top coat. Allow the paint to dry completely so that the cracks stay intact. -
Apply a top coat of flat latex or acrylic paint. Brush one coat only of flat latex or acrylic paint over the crackle medium or glue. Brush your top coat on lightly to get thin cracks and brush on a heavy coat to get large cracks.- Use a spouncer brush to sponge-paint the top coat if you want spider web-like cracks.
-
Give the paint at least 2 hours to dry. If you aren’t sure if it’s dry, lightly touch an inconspicuous part of the object with your fingertip. If it feels dry to the touch, and not tacky, then the paint is dry.
Advertisement
-
Sand the edges of wooden items to make the base coat more visible. After the top coat is completely dry to the touch, sand the item again with sandpaper. If you want to see a lot more of the base coat, sand the entire item. If you just want to add a little bit more to the distressed look, just sand the item’s edges and curves. -
Create depth and texture with aging dust. If your item is still looking too “new,” you can use a paintbrush to brush on some aging dust to give it the illusion of age. Focus on applying the dust in cracks and crevices in order to see more depth and texture.- You can purchase aging dust at craft stores and online.
-
Seal the finish with a clear coat of sealant. Once you’ve gotten your item the way you want it, lock in its finish by brushing on a clear coat of sealant. This is an especially good idea if your item is a frequently used piece of furniture that you want to protect. [9] X Research source- Follow the sealant drying instructions before using the item.
- If your item is something that will be touched less often, such as a piece of wall art, consider going without the sealant. This will play up the distressed look.
Advertisement
Community Q&A
Search
-
QuestionCan I use a satin paint for a top coat on top of glue?Community AnswerYes, and it might even crack more effectively. If you're unsure, you could try the technique on a scrap piece of wood.
-
QuestionHow can I determine the best color combinations for the bottom and top coats?Community AnswerAnything with high contrast will show up, either light to dark, dark to light, or colors far enough apart on the color wheel. Note that colors DON'T have to be opposite on the color wheel (complimentary), just different enough. Even yellow and orange can contrast enough if the values (light or dark) are different. Try a google image search of crackled pieces for inspiration.
-
QuestionCan I use PVA glue as a crackling glue?Community AnswerYes. Crackle medium gives a more subtle crackle finish. Make sure not to let the PVA or Elmer's glue dry completely. Otherwise, you'll need to apply another coat.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- For larger projects, you may wish to work in sections so that the glue does not dry before you can apply the top coat.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- 150-grit sandpaper
- Damp cloth
- Primer
- Paintbrushes
- Latex or acrylic paint
- Crackle medium or school glue
- Spouncer brush (optional)
- Aging dust
- Sealant
References
- ↑ https://www.bobvila.com/articles/how-to-crackle-paint/#.WdO5IUyZN-U
- ↑ https://www.bobvila.com/articles/how-to-crackle-paint/#.WdO5IUyZN-U
- ↑ http://www.familytime.com/showarticle.aspx?articleid=891
- ↑ https://www.bobvila.com/articles/how-to-crackle-paint/#.WdO5IUyZN-U
- ↑ https://www.apartmenttherapy.com/pros-and-cons-of-using-different-paint-finishes-179555
- ↑ https://www.bobvila.com/articles/how-to-crackle-paint/#.WdO5IUyZN-U
- ↑ https://www.bobvila.com/articles/how-to-crackle-paint/#.WdO5IUyZN-U
- ↑ https://www.bobvila.com/articles/how-to-crackle-paint/#.WdO5IUyZN-U
- ↑ https://www.bobvila.com/articles/how-to-crackle-paint/#.WdO5IUyZN-U
About This Article
Article Summary
X
If you want to decorate an item with crackle paint, sand down and prime the item, then let the primer dry. Once the primer is no longer tacky to the touch, paint the entire object with a semi-gloss acrylic base coat. This is the color that will show under your crackle. Allow the paint to dry for at least a day, then brush crackle medium over the paint. Let the crackle medium dry completely, then use a flat latex or acrylic paint for the top coat. To learn how to distress the finish to enhance the crackle effect, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 448,140 times.
Reader Success Stories
- "Thanks for the simple, step by step refresher! I used crackle painting frequently as a freelance muralist but its been a while. I'm teaching art now and having my students use this technique on old deck boards, and I needed a reminder on drying time. Thanks!" ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Thanks for the simple, step by step refresher! I used crackle painting frequently as a freelance muralist but its been a while. I'm teaching art now and having my students use this technique on old deck boards, and I needed a reminder on drying time. Thanks!"
..."
more
"I did my entire kitchen cabinets this way in the 80's. They still look great, but now I needed to refresh my memory on the details to add more cabinets that may look similar to the old ones. Perfect directions!"
..."
more
"I took an old door, cut it lengthwise, joined the backs, put shelves in front and did the crackle. It is really neat, thanks for all your tips!"
..."
more
"I was having a hard time doing crackle on furniture to age it. Wasn't sure what I was doing wrong. Now I have the answer. Problem solved."
..."
more
"I just didn't know how to do it. The easiest article to use with the best diagrams and explanation."
