How to Create an Apollonian Gasket

Apollonian Gaskets take the form of beautiful fractal arrangements of shrinking circles. Mathematically, Apollonian Gaskets have infinite complexity, but, whether you're using a computer drawing program or traditional drawing tools, you'll eventually reach a point at which it's impossible to draw circles any smaller. Note that the more precisely you draw your circles, the more you'll be able to fit in your Gasket.

1. 1
   Gather your digital or analog drawing tools. In the steps below, we'll make our own simple Apollonian Gasket. It's possible to draw Apollonian Gaskets by hand or on the computer. In either case, you'll want to be able to draw perfectly round circles. This is fairly important. Since every circle in an Apollonian Gasket is perfectly tangent to the circles next to it, circles that are even slightly misshapen can "throw off" your final product.

   • If drawing the Gasket on a computer, you'll need a program that allows you to easily draw circles of a fixed radius from a central point. Gfig, a vector-drawing extension for the free image editing program GIMP, can be used, as can a wide variety of other drawing programs (see the materials section for relevant links). You will also probably need a calculator application and either a word processor document or a physical notepad for taking notes on curvatures and radii.
   • For drawing the Gasket by hand, you'll need a calculator (scientific or graphing suggested), a pencil, compass, ruler (preferably a scale with millimeter markings, graph paper, and a notepad for note taking.
2. 2
   Start with one large circle. Your first task is easy - just draw one big, perfectly round circle. The bigger the circle is, the more complex your Gasket can be, so try to make a circle as large as your paper allows or as large as you can easily see in one window on your drawing program.
3. 3
   Create a smaller circle inside the original, tangent to one side. Next, draw another circle inside the first that's smaller than the original, but still fairly large. The exact size of the second circle is up to you - there is no correct size. However, for our purposes, let's draw our second circle so that it reaches exactly halfway across our large outer circle. In other words, let's draw our second circle so that its central point is the midpoint of the large circle's radius.

   • Remember that in Apollonian Gaskets, all circles that touch are tangent to each other. If you're using a compass to draw your circles by hand, recreate this effect by putting the sharp point of the compass at the midpoint of the large outer circle's radius, adjusting your pencil so that it just touches the edge of the large circle, then drawing your smaller inner circle.
4. 4
   Draw an identical circle "across from" the smaller inside circle. Next, let's draw another circle across from our first one. This circle should be tangent to both the large outer circle and the smaller inner circle, which means that your two inner circles will touch at the exact midpoint of the large outer circle.
5. 5
   Apply Descartes's Theorem to find the size of your next circles. Let's stop drawing for a moment. Now that we have three circles in our Gasket, we can use Descartes's Theorem to find the radius of the next circle we'll draw. Remember that Descartes's Theorem is d = a + b + c ± 2 (sqrt (a × b + b × c + c × a )) , where a, b, and c are the curvatures of your three tangent circles and d is the curvature of the circle tangent to all three. So, to find the radius of our next circle, let's find the curvature of each of the circles we have so far so that we can find the curvature of the next circle, then convert this to its radius.

   • Let's define the radius of our outer circle as 1 . Because the other circles are inside this one, we're dealing with its interior curvature (rather than its exterior curvature), and, consequently, we know its curvature is negative. - 1/r = -1/1 = -1. The big circle's curvature is -1 .
   • The smaller circles' radii are half as large as the big circle's, or, in other words, 1/2. Since these circles are touching each other and the large circle with their outside edge, we're dealing with their exterior curvature, so their curvatures are positive. 1/(1/2) = 2. The smaller circles' curvatures are both 2 .
   • Now, we know that a = -1, b = 2, and c = 2 for our Descartes's Theorem equation. Let's solve for d:
     • d = a + b + c ± 2 (sqrt (a × b + b × c + c × a ))
     • d = -1 + 2 + 2 ± 2 (sqrt (-1 × 2 + 2 × 2 + 2 × -1 ))
     • d = -1 + 2 + 2 ± 2 (sqrt (-2 + 4 + -2 ))
     • d = -1 + 2 + 2 ± 0
     • d = -1 + 2 + 2
     • d = 3. The curvature of our next circle is 3 . Since 3 = 1/r, the radius of our next circle is 1/3 .
6. 6
   Create your next set of circles. Use the radius value you just found to draw your next two circles. Remember that these will be tangent to the circles whose curvatures you used for a, b, and c in Descartes's Theorem. In other words, they will be tangent to both the original and second circles. For these circles to be tangent to all three circles, you'll need to draw them in the open spaces in the top and bottom of the area inside your large original circle.

   • Remember that these circles' radii will be equal to 1/3. Measure 1/3 back from the edge of the outer circle, then draw your new circle. It should be tangent to all three of the surrounding circles.
7. 7
   Carry on in this fashion to continue adding circles. Because they are fractals, Apollonian Gaskets are infinitely complex. This means you can add smaller and smaller circles to your heart's content. You're limited only be the precision of your tools (or, if you're using a computer, the ability of your drawing program to "zoom in"). Each circle, no matter how small, should be tangent to three other circles. To draw each subsequent circle in your Gasket, plug the curvatures of the three circles it will be tangent to into Descartes's Theorem. Then, use your answer (which will be the radius of your new circle) to draw your new circle accurately.

   • Note that the Gasket we've chosen to draw is symmetrical, so the radius of one circle is the same as the corresponding circle "across from it". However, know that not every Apollonian Gasket is symmetrical.
   • Let's tackle one more example. Let's say that, after drawing our last set of circles, we now want to draw the circles that are tangent to our third set, our second set, and our large outer circle. The curvatures of these circles are 3, 2, and -1, respectively. Let's plug these numbers into Descartes's Theorem, setting a = -1, b = 2, and c = 3:
     • d = a + b + c ± 2 (sqrt (a × b + b × c + c × a ))
     • d = -1 + 2 + 3 ± 2 (sqrt (-1 × 2 + 2 × 3 + 3 × -1 ))
     • d = -1 + 2 + 3 ± 2 (sqrt (-2 + 6 + -3))
     • d = -1 + 2 + 3 ± 2 (sqrt (1))
     • d = -1 + 2 + 3 ± 2
     • d = 2, 6. We have two answers! However, because we know that our new circle will be smaller than any of the circles it is tangent to, only a curvature of 6 (and therefore a radius of 1/6 ) makes sense.
     • Our other answer, 2, actually refers to the hypothetical circle on the other side of the tangent point of our second and third circles. This circle is tangent to both of these circles and to the large outer circle, but it would intersect the circles we've already drawn, so we can disregard it.
8. 8
   For a challenge, try making a non-symmetrical Apollonian Gasket by changing the size of your second circle. All Apollonian Gaskets start the same - with a large exterior circle that acts as the edge of the fractal. However, there's no reason that your second circle necessarily has to have 1/2 the radius of the first - we just chose to do this above because it's simple and easy to understand. For fun, try starting a new Gasket with a second circle of a different size - this will lead to exciting new avenues of exploration.

   • After drawing your second circle (regardless of its size), your next act should be to draw one or more circles that are tangent both to it and to the large outer circle - there's no right way to do this, either. After this, you can use Descartes's Theorem to determine the radii of any subsequent circles, as shown above.
Advertisement