Littlest Pet Shop toys are adorable and so much fun, especially when you customize your own! You can use paint, glitter glue, stickers, and other decorations you may already have at your house. By using your creativity, you can make your LPS toy totally unique.
Steps
-
Set up your painting station. Lay down 2-3 layers of newspaper on a flat surface, like a table, and set out your painting supplies. You want to keep your crafting area protected, since acrylic paints can stain.
-
Remove any existing paint with acetone. Pure acetone is the best way to remove your LPS toy’s current paint and give you a blank canvas to start customizing. Wet a cotton ball or one corner of a washcloth with it and rub it against your LPS toy, pressing down firmly. Continue wetting your washcloth and removing the paint until your LPS toy is down to its plain base coat. You can also paint the LPS in white acrylic paint if you don't have acetone but this will take a bit longer. Always wash the pet before continuing, as the acetone can also ruin the paint. Wear a mask to prevent breathing in any dangerous fumes. [1] X Research source
- Don’t try to take the paint off with nail polish remover. It will smear the paint instead of taking it off.
- Don't use acetone on McDonald's LPS. They're made of a type of plastic that dissolves in acetone.
Warning: Acetone is highly flammable. Only use it with adult supervision and never put it near heat, like a microwave or oven.
Advertisement -
Squirt out some acrylic paint in your desired color. Acrylic paint won’t smear and is easy to find in most craft stores! Pour out a small, coin-sized amount onto a paper plate or napkin. You’ll only be applying in thin layers, so you don’t want to pour out too much.
- You can use a matte color for a solid look, or try metallic for a bit of shine.
- Don’t use sharpie markers or nail polish to paint your LPS toy. Sharpies can smear and stain, while nail polish will flake off after a few weeks. [2] X Research source
-
Start painting at the bottom of the toy with a thin paintbrush. Dip a small, thin paintbrush into your paint, getting just a little on the bristles. Hold your LPS toy by the top and start painting on the feet and legs, going from front to back. Use smooth brush strokes and paint in thin coats so it doesn’t clump and takes less time to dry. [3] X Research source
- Starting at the feet will help them dry first, so you can set down the toy to paint the head.
Cool LPS Toy Paint Designs to Try
Stripes
Rainbow pattern
Polka dots
Cute designs, like flowers or vines
A life-like style, like a real dog, cat, etc.
-
Continue to your toy’s head, then let it dry and paint a second coat. Continue painting in a smooth, thin layer until you get to the top. Let the paint dry for as long as the instructions specify, then paint on a second layer to neaten up and make the color bolder.
- If you’re painting with different colors, feel free to switch while you’re painting your first and second layers! Just try to use a different paintbrush for each color, or wash the brush thoroughly with water before using it for a new color.
- If your paint still isn’t as neat or bright as you want it, add a third layer.
-
Paint small details and designs last. Once you’ve completed the base layers of your paint, go back and add any last decorations. You might want to outline the eyes, eyelashes, lips, nose, paws, or tail in black or another color. This is also the time to add fun decorations like polka dots, tiger stripes, or anything else you want to try! [4] X Research source
- Don’t worry if you smeared into any unwanted areas. Simply wait for it to dry, then paint over it with the correct color. Acrylic paint is thick enough that the bottom color won’t show through.
-
Use a spray sealant to make your LPS toy’s custom look last. Once you’re happy with your LPS toy’s new paint job, let it dry fully for as long as the instructions say. Then, lay it flat on your newspaper base and spray it with a clear sealant product. Let it dry as specified in the instructions, then turn your LPS toy over and spray the back as well. [5] X Research source
- For a flat finish, choose a matte spray. If you want a shinier look, go with a glossy spray. Do not use a nail polish clear coat for a sealant or it will smear the paint rather than sealing it.
Advertisement
-
Paint over nail art stencils for cute, easy designs. Nail art stencils are tiny, making them the perfect tools to add cute details to your LPS toy! Choose a stencil from a nail art kit and stick it onto your toy, then use a small paintbrush to paint over the design in a thin layer. Let it dry, then carefully peel off the stencil. [6] X Research source
- Use acrylic paint, which will last the longest and look the best on your toy.
- You can find nail art kits in the beauty aisle of most big stores, or online.
-
Stick on small stickers to give your LPS toy a little extra detail. If you have a blank spot on your LPS toy and don’t want to do any more painting, stickers are a great option! Choose a tiny one in any design you want, then carefully stick it on. Make sure you know exactly where you want to put it, since you probably won’t be able to peel it back off once it’s on. [7] X Research source
- You can use regular crafting stickers or nail stickers, which are even smaller.
-
Sprinkle or paint on a little glitter for a pretty shine. Try sprinkling on just a bit of glitter while your paint is still drying for a playful, random look. You can also place little sparkles on one by one in small areas, like around your LPS toy’s eyes or paws. For even more accuracy, try using a glitter paint or glue. [8] X Research source
-
Add little bows on your LPS toy’s ears with colorful ribbons. You can tie a small bow with a pretty ribbon, then use super glue to attach it to your LPS toy’s ears or head. You can also tie on the bow directly, but it might look a little messier and shift around over time.
-
Give your LPS toy little props for a fun, unique addition. What else can you do to customize your LPS toy? The sky is the limit! Look around your house and see what kind of small accessories you can give your toy. You can attach them right to your LPS toy with superglue or lean them up against it on your shelf.
Unique Prop Ideas for Your LPS Toy
Glue pretty beads onto your LPS toy, like buttons.
Make a witch or wizard LPS toy with a little twig as a wand.
Make a school LPS toy by cutting out a small sheet of paper and making a pencil from a couple of toothpicks.
Give your LPS toy a doll crown to help it become a prince or princess.
-
Make custom accessories like tails with epoxy clay. Tools like epoxy clay are a great way to get creative with colorful, permanent accessories. You can make cool additions like hats, earrings, or even tails! Choose a clay color and mold away, attaching it to your LPS toy when you’re done and letting it sit for 24 hours to dry. [9] X Research source
- To create a unique mermaid tail for your LPS toy, first ask your parents to help cutting off the back legs with a sharp knife. Mold your epoxy clay in a swooping tail, about 1 in (2.5 cm) long. Let it dry for 24 hours, then mold a little mermaid fin for the end. Let it dry afterwards. If you want wings for your LPS toy do the same thing!!
Advertisement
Community Q&A
Search
-
QuestionHow do I do tiny details?Community AnswerFor tiny details with paint, a thin brush will work. For sharpies, I recommend trying to draw tiny on paper before you do it on the toy.
-
QuestionHow can I find a LPS toy that is plain or white?Akela YoungCommunity AnswerYou can go on Amazon or eBay and try to find one. Another good tip is to paint a few layers of your base coat if you don't have a white or plain LPS.
-
QuestionHow can I do well on the eyes?Star8779Community AnswerUse a thin paintbrush, and focus on it. The eyes are very hard, so be careful.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Don’t worry if you mess up a little! Your LPS toy is completely unique and special, and you’ll still love it no matter what.Thanks
- Don't let it ever get near water! The paint will come off anyway you can do it again.Thanks
- When working with fine details, use a toothpick for more precision.Thanks
Tips from our Readers
The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
- If you're having trouble with making your eye spots right, you can always go to a local craft store or Amazon and buy a dotting tool. You can also use the tip of the handle of a skinny paintbrush as a dotting tool in a pinch.
- If you are coloring your LPS with a Sharpie, store it away from other LPS figures. The Sharpie can rub off on the other figures, leaving a stain.
- After dipping your brush in paint, dip it in water before painting on the toy. This will help smooth out any brush strokes and bubbles.
- To make parts of your LPS shiny, use Mod Podge. You can paint it on like acrylic paint, and it will dry clear and shiny.
- Use a fake LPS figure for customizing, as they usually have bad paint jobs and are cheaper than actual LPS toys.
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Things You’ll Need
- 2-3 newspapers
- Acetone (or nail polish remover)
- Washcloth
- Acrylic paint
- Paper plate or paper towels
- At least 1 small, thin paintbrush
- Spray sealant (optional)
- Decorations like nail art stencils, stickers, glitter, ribbon, and props (optional)
References
- ↑ https://www.youtube.com/watch?v=zgSN_qlmfoA&feature=youtu.be&t=58
- ↑ https://www.youtube.com/watch?v=dEynPWWJHno&feature=youtu.be&t=64
- ↑ https://www.youtube.com/watch?v=rwaDug9q_Ac&feature=youtu.be&t=53
- ↑ https://www.youtube.com/watch?v=8CLYOBmZ5Pw&feature=youtu.be&t=492
- ↑ https://www.youtube.com/watch?v=8CLYOBmZ5Pw&feature=youtu.be&t=599
- ↑ https://www.youtube.com/watch?v=8CLYOBmZ5Pw&feature=youtu.be&t=354
- ↑ https://www.youtube.com/watch?v=8CLYOBmZ5Pw&feature=youtu.be&t=567
- ↑ https://www.youtube.com/watch?v=8CLYOBmZ5Pw&feature=youtu.be&t=251
- ↑ https://www.youtube.com/watch?v=Shn87Ew-JKY&feature=youtu.be&t=167
About This Article
Article Summary
X
To customize your Littlest Pet Shop toy, first remove its existing paint with a small amount of acetone. Do this under adult supervision, since acetone is flammable and can be dangerous. Then, start painting your LPS toy with an acrylic paint, going in thin layers so they dry faster. Let your paint dry, then go over your toy one last time to fix any mistakes, outline the lips and eyes, or add detailing. Seal the paint job with clear sealant, then you're done! To learn more about customizing your toy, like using stencils and stickers, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 108,917 times.
Reader Success Stories
- "I got a dupe of an LPS, so I decided to paint it. I didnt have acetone so I had to use white paint. So far I've gotten the base color on, so I am going to do the rest tomorrow! I think this article is great for beginners like me!" ..." more
Advertisement
"I got a dupe of an LPS, so I decided to paint it. I didnt have acetone so I had to use white paint. So far I've gotten the base color on, so I am going to do the rest tomorrow! I think this article is great for beginners like me!"
..."
more
"wikiHow is a very useful website to visit when you do not know something. You can always rely on wikiHow."
"I needed to know if and what kind of sealer to use for LPS customs."
"Such a good article! The sharpie method is great!"
"The toy looks pawsome, its icy look is cool."
