Download Article
Download Article
Imagine you're slowly approaching the top of the lift-hill. A little more, and... swoosh you fly down the hill as you and the rest of the passengers squeal in delight , as the negative Gs are nearly unbearable. Have you ever wondered where these great roller coasters come from? A model designed by an architect or engineer is where it all begins. Sure you have technology, with the computer simulators of roller coaster designs, and even the blueprints. But without a model, these phenomenal roller coasters are harder to build. Models are not only a help to the park which buys your design, but a work of art. When your roller coaster is built, you can show off to your friends how you made your dream into a reality!
Steps
Download Article
-
Choose the design which you want to be made into a model. Is it the cute children's design, or the big beastly monster that will have everybody screaming with delight and fear?
-
Make sure the design is properly put together, and completed. You wouldn't want your work to collapse into a giant pile of garbage.Advertisement
-
Select the type of material you would like for your model to be made of. Clay, metal, some people even make them out of Popsicle sticks and toothpicks! Create a list of all the materials which you selected in the previous step, and purchase them. These can be found in most arts and crafts stores.
-
Map out how you plan on building your model on its structure, track, and supports. These categories, are very important for completing the entire project, and supporting the model. Using Plexiglas, layout the shape of the model first with a regular marker. once the layout of the model is properly put down, go over the layout in permanent marker. Now you are ready to begin the building process. Begin to gather all necessary supplies for the model such as glue, the material used for the model itself, paint, and scenery pieces. Take time to carefully put the model together, so that you are sure that it is securely constructed, and strong.
-
Be sure to build your model on a material (preferably green or brown to resemble the ground) which will stand firm.
-
Check to make sure all parts of the track and supports are in the model such as supports, and all track segments.
- Now the lift hill, or launch sections will be applied.
- Lift Hill
-
Depending on the type of roller coaster, the difficulty of applying the lift hill may vary.
- A wooden roller coaster will be harder to apply, as the chain of the lift must squeeze in between the supports underneath the track.
-
Begin placing 3-4 wires next to each other in the center of the track on the lift hill.
-
Select 2 places at the top and bottom of the track, where the lift will go through to meet under the track.
-
Using great caution, on the side of the first hill begin to thread the wire under the supports, until both ends meet. Glue both together, and allow to dry.
- Steel roller coasters are much easier to apply the lift to.
-
Take 3-4 wires, and begin applying them with glue to the top side of the lift hill.
- Launch sections
-
The launch sections are usually simple to place on models, since majority of roller coasters with them are flat. The following will explain the most common forms of launches.
- LSM
- Linear Synchronous Motor is basically the simplest to apply, and can be found on the recently opened roller coaster Maverick, at Cedar Point.
-
Apply 2 or 3 wires onto the launching section of the model, up to the hill, inversion, turn etc. As easily as that, you're done!
- LIM
- Linear Induction Motors are fairly easy to apply, and are often featured inside of the coaster's station. Most launched roller coasters are LIM roller coasters.
-
These types of roller coasters use magnetic mechanisms to launch forward. Small pieces of plastic can easily do the job. Begin to gently squirt glue onto the inner portion of the designated track. begin placing each piece on the track individually, and hold each into place for a short amount of time.
- Hydraulic
-
Hydraulic launched roller coaster models require more attention, because the launch section requires dozens of brakes. Kingda Ka, Top Thrill Dragster, and Storm Runner are all hydraulic launched.
-
Small metal plates are a great choice, but if you aren't able to get a hold of them, chips of plastic will do. begin applying glue and the plates/plastic onto the track. Make sure the brakes are the closest to being perfectly aligned.
- NOTE: Hydraulic launched roller coasters must have a rectangular track.
-
Once the lift or launch section is completed, you are now ready to begin painting your model. The type of paint that you choose isn't the most important thing in the world, but you do need to make a good choice however. Watercolor is acceptable for wood, but less useful for metal. The choice is yours, and yours alone.
-
Design a train for your roller coaster, that has a reasonable amount of cars, depending of the size of the model. Make sure that it is able to be placed on any part of the track, however, it does not need to roll.
-
Gather all types of scenery which you purchased earlier, and begin to bond them onto the surface which the model is built on. This final step is important, to grab the eye of your company. without scenery, the roller coaster will often look droll, and the viewers will have a lack of interest.
Advertisement
Community Q&A
Search
-
QuestionHow do I make a roller coaster?Community AnswerUse plastic tubing (which you can find at Ace, Home Depot, etc), PVC Pipes (which you can also find at Ace, Home Depot, etc), and a wooden base board. You will need items to anchor down the PVC pipes to the wood. Also, get electrical tape to attach the tubing to the pipes. You'll need screws to keep the materials in place as well.
-
QuestionApproximately how long does this take?Community AnswerIt will take around 10-14 weeks. It requires a lot of planning, then you have to buy the supplies, build the model, and then test it out.
-
QuestionHow could I turn this into a science fair project?Community AnswerYou could use the roller model to demonstrate kinetic and potential energy. You could also test different brakes/launches and see which one is the best for different speeds!
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Use super glue; it works better.Thanks
- Get a park to see your model, imagine after all the work you put into making the model, you get to ride it.Thanks
- Make your roller coaster model using a scale, or else your model will be impossible to build.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Make sure the route on your roller coaster is realistic. (In other words, do not add 100 loops in the track design) as no parks will bother to respond to your requests.Thanks
- Handle the super glue cautiously, as it is extremely sticky.Thanks
Advertisement
Things You'll Need
- Super glue
- Your choice of material for the model (e.g., clay, tin)
- 1 yard (0.9 m) of wire (there will be extra 90% of the time)
- Scenery pieces such as artificial trees, miniature people, plants etc.
- Patience, as the process takes an average of 5-8 hours a day for two weeks
About This Article
Thanks to all authors for creating a page that has been read 370,733 times.
Advertisement
