You may need to know the size of your tires for various reasons, such as for a spare tire or when purchasing wheels, rims, or snow tires. However, measuring the tire size manually with a tape measure will not give you accurate results. Luckily, your tire size is easy to figure out. Simply read the series of letters and numbers printed on the tire sidewall—all the information you need is right there!

How to Find & Read Your Tire Size

  1. Locate the tire code (a series of letters and numbers) on your tire’s sidewall.
  2. The first 3-digit number tells you the tire width in millimeters.
  3. The next 2-digit number is the aspect ratio of the tire section’s height and width.
  4. The following 2-digit number displays the tire’s rim diameter in inches.
  5. The tire size is also found in your owner’s manual or driver’s side door sticker.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*
Part 1
Part 1 of 2:

Understanding the First Half of the Series

PDF download Download Article
  1. Tires are manufactured with the tire size printed on the sidewall. The sidewall is the outer wall of the tire, rather than the tread that contacts the road. The size should be printed underneath the tire manufacturer name, just above the rim of the tire. [1]
    • For instance, the series may look like this: P 225 / 50 R 17 98 H
  2. On some tires, the series of numbers begins with a letter. “P” stands for “P-metric” and denotes a passenger vehicle. [2] “LT” stands for light truck, “T” means temporary spare, and “C” stands for commercial. If you're purchasing a spare or new tire, you'll need to choose the same service type as the rest of the tires. [3]
    Advertisement
  3. The 3-digit number before the slash denotes the tire width, which is measured from sidewall to sidewall and corresponds to the tread that contacts the road. The measurement is given in millimeters, and all 4 tires must have the same width.
    • For instance, if the first number is 225, the tire tread is 225 mm wide.
  4. The numbers after the slash indicate the aspect ratio, which compares the tire's section height with the tire's section width. [4] If you're replacing only 1 tire, make sure it has the same aspect ratio as the others.
    • For example, if there is a “50” after the slash it means the tire's section height is 50% of the tire's section width.
  5. Advertisement
Part 2
Part 2 of 2:

Figuring out the Second Half of the Series

PDF download Download Article
  1. After the aspect ratio, a single letter will be listed that denotes how the tire was constructed. “R” means radial construction, “B” stands for belted bias, and “D” means diagonal bias construction. Choose a spare or new tire with the same casing and construction as the rest.
  2. After the letter, there will be a 2-digit number. This number gives the measurement, in inches, of the rim diameter, which is essential to know if you're getting new rims or wheels. [5]
    • For instance, if the number is 17, your rims are 17 inches (43.2 cm) in diameter.
  3. The last combination of letters and numbers is called the service description. The load index refers to the load-carrying capabilities of a properly-inflated tire, while the speed rating tells you the maximum speed the tire can handle.
    • The load index number corresponds with a load index chart, and does not tell you the weight in pounds. For instance, a load index of 98 can carry 1,653 pounds. [6]
    • Speed ratings are lettered A–Z and correspond to a speed rating chart. For example, the letter H indicates a maximum speed of 130 mph.
  4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What is the difference between 185/14 and 195/14?
    Community Answer
    The larger number just represents the distance from bead to bead, so 195/14 would be slightly larger.
  • Question
    What's the tire size for 1998 Dodge Neon?
    Community Answer
    Check the driver's side door. There should be a label there indicating the correct tire pressure and tire sizes. You can also check on the sidewall of the actual tires you have on the car now, it should be clearly printed on the side.
  • Question
    If my vehicle was factory-equipped with 255/55 R18 tires, can I change to 265/55 R18 if I change all four tires?
    Logic Johnson Lafontaine
    Top Answerer
    Can you just swap them? No. You'll need new wheels to put them on because the new tires will have slightly bigger sidewalls. You also need to be sure the factory tires aren't max size, because the new ones are 10 mm wider.
See more answers
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      References

      1. Howard Fleischmann. Automotive Tire & Repair Specialist. Expert Interview. 4 June 2021.
      2. Howard Fleischmann. Automotive Tire & Repair Specialist. Expert Interview. 4 June 2021.
      3. https://www.tirerack.com/upgrade-garage/how-do-i-read-my-tire-size-on-my-sidewall
      4. Howard Fleischmann. Automotive Tire & Repair Specialist. Expert Interview. 4 June 2021.
      5. https://www.tirerack.com/upgrade-garage/how-do-i-read-my-tire-size-on-my-sidewall
      6. https://www.tiresplus.com/tires/tire-buying-guide/tire-load-index-chart/

      About This Article

      Thanks to all authors for creating a page that has been read 102,017 times.

      Reader Success Stories

      • Trika Mullings

        Nov 19, 2020

        "Thanks to wikiHow, I'm so proud of myself as a single mom! I successfully purchased the right tires for my ..." more
      Share your story

      Did this article help you?

      Advertisement