How to Disable a Fire Alarm

PDF download Download Article
PDF download Download Article

Smoke alarms are important devices that can keep you safe in the case of a fire. However, they can also be a nuisance if the alarm malfunctions or activates while you’re doing things like cooking. Depending on your specific unit, disabling a fire alarm may require a simple button press or more complicated series of actions.

Quick Guide to Disabling a Fire Alarm

For most devices, find and hold the button on the front of the alarm, until the alarm stops, to reset the device. Or, find the button labeled "Silent" or "Hush" to disable an inactive alarm. Totally disable an alarm by disconnecting its wires.

Method 1
Method 1 of 4:

Silencing a Battery Powered Smoke Detector

PDF download Download Article
  1. Look around your house for the activated fire alarm unit. In addition to the alarm sound itself, this is typically indicated by a rapidly flashing red light on the front of the unit. Because the alarm is free standing, it should not have activated other alarms, meaning you only have one to worry about. [1]
    • Be aware that some battery-powered smoke alarms may also be interconnected wirelessly to others or to a fire alarm panel.
  2. For most modern battery-powered fire alarms, you can do this by pressing or holding a button on the front of the device for a few seconds. If you have an older model, you may need to unscrew your alarm from the wall or ceiling and hold down a button on the back. [2]
    • For some models, pressing for more than two seconds may trigger a programming mode rather than a silencing mode.
    Advertisement
  3. If resetting the detector doesn’t turn off the alarm, there may be an issue with the batteries. Unscrew your detector from the wall or ceiling and replace the batteries. Then, reset the device. If the alarm is still active, remove the batteries entirely. [3]
    • Newer alarms may have a non-removable 10-year battery. Do not attempt to remove such a battery. You will need to replace the entire unit, if it is defective.
    • If the alarm is chirping occasionally instead of giving a full, rapid alarm, it is a sign that the batteries are dying or that the unit has become defective.
  4. If, after several days, the alarm still goes off whenever you put in batteries, it may be time to get a new device. Battery powered smoke detectors are available from most supermarkets and home improvement stores. Depending on the quality of the unit, they typically cost between $10 and $50. [4]
    • Many fire codes require replacement of residential smoke alarms at intervals no more than ten years, or whatever shorter time may be listed in the manufacturers' instructions. [5]
    • Check with your local fire department or Red Cross to see if they offer free or discounted smoke detectors.
    • Be sure to install units that are compatible with your existing units, to avoid confusion, especially if they are wirelessly interconnected.
    5. Advertisement
Method 2
Method 2 of 4:

Turning off a Hardwired Fire Alarm

PDF download Download Article
  1. Since hardwired smoke alarms may be connected to each other, one going off may cause the rest to follow suit. To silence them, you’ll need to reset at least one of them by pressing or holding down a button located on the front, side, or back of the device. For some alarm models, you may need to unscrew the unit from the wall or ceiling to reach the reset button. [6]
    • Most interconnected smoke alarms also indicate which sensor initiated the alarm, often using a rapidly flashing red or green light on that unit. Resetting the alarm may result in losing that information, although some models also have an "alarm memory" function.
    • If only one alarm is active, it may be a sign that the unit is malfunctioning. A short chirping sound would indicate a low battery or "end-of-life" condition on most units.
    • If your hardwired unit is controlled by a keypad, consult your user manual for a deactivation code.
  2. If your alarms are all routed to a specific breaker, you’ll only need to flip that one. If not, you may need to flip multiple breakers corresponding to different parts of your house.
    • Circuit breakers are typically found in a garage, basement, or maintenance closet.
    • If you’re cutting off power to entire rooms, unplug any appliances in the area to keep them from experiencing unnecessary power surges.
    • Some fire codes prohibit installation of all smoke alarms on the same circuit, thus providing some amount of continued safety from remaining units if one circuit breaker is accidentally tripped.
  3. If the alarms are still active, you may need to disconnect them entirely. To take down a unit, twist the alarm counter-clockwise and pull it off the wall or ceiling. Remove the cord connecting the unit to the house and, if necessary, remove any backup batteries. Repeat  this for every unit. [7]
    • Many user manuals instruct you to first shut off the power before attempting to disconnect the plug powering a unit. This may help avoid the risk of shock if there is a problem with the connector or the high-voltage wiring.
  4. If you’re trying to turn off a hardwired fire alarm in a commercial building, apartment complex, or dorm, there’s a very good chance you won’t be able or authorized to do it yourself. In these cases, call your apartment manager or the local fire department’s non-emergency hotline and ask them to shut it off. [8]
    • Though most system alarm shut-offs can be done remotely, some buildings may require a physical, in-person reset.
    • For safety of others, some fire codes prohibit silencing of alarms by anyone not specifically authorized by the fire department for that incident.
  5. If your alarms go off when no fire is around, you may need to replace the individual units or repair the wiring connecting them. Replacement units generally cost between $10 and $50, and you can purchase them from supermarkets or home improvement stores. If your new units malfunction as well, you may need to hire a local electrician to inspect your wiring. [9]
    • Make sure your replacement units are compatible with the hardwiring or interconnection of the remaining units. Otherwise, replace all units at the same time with the same model.
    6. Advertisement
Method 3
Method 3 of 4:

Disabling an Inactive Smoke Detector

PDF download Download Article
  1. In recent years, many companies have enhanced their alarms by adding silence buttons to them. These will temporarily disable your alarm, allowing you to cook, smoke, or do other actions that would normally set them off. Look for a button on your alarm that is either unmarked or listed as ‘Silence,’ ‘Hush,’ or something similar.
    • Many silence buttons are combined with a test alarm button.
    • The "hush" or silence features will not work on some models unless the alarm is going off.
    • Most silence buttons deactivate the alarm for 10 to 20 minutes.
  2. If your alarm does not have a silence button, or if you need it off for a significant amount of time, try removing its power source. Twist your alarm counter-clockwise, then pull it off the mounted base. If your smoke detector is hardwired, pull out the cable attaching it to the wall or ceiling and remove any backup batteries. If your alarm is an independent unit, simply remove its batteries. [10]
    • In some alarms, the batteries may be hidden behind a sliding or screw-mounted panel.
    • Newer alarms may have a non-removable 10-year battery. Do not attempt to remove such a battery. You will need to replace the entire unit, if it is defective.
  3. Every smoke detector is different, and many are designed so you can’t easily or accidentally disable them. If you can’t find your alarm’s power button or power source, look for model-specific information in your user manual. If you no longer have the physical copy, many companies keep digital user manuals on their websites.
    4. Advertisement
Method 4
Method 4 of 4:

Disabling Commercial Fire Alarms

PDF download Download Article
  1. Typically, fire alarm systems for large commercial buildings are controlled by a primary panel. These panels are often located in a breaker room or janitor’s closet.
  2. If a panel is covered by a protective box, you’ll first need to use a key to open the box and access the controls. Once the controls are exposed, you may need to punch in a verification code or insert a small control key into the panel. This will allow you to actually use the controls. [11]
  3. Every commercial fire alarm system is different, meaning each one will have a unique shut-off process. However, this will typically involve selecting a fire zone or addressable alarm head and pressing a ‘silence’ or ‘reset’ button. Other systems require silencing the entire system.
    4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Can I completely disconnect one of my hardwired battery backup smoke detectors and leave it off? We have 6 other wired/battery ones in our house. The one I want to permanently disconnect is too high.
    Upnorth Here
    Top Answerer
    You can do that, but it may be unwise, if not also illegal. As a general rule, contractors install only the smoke alarms or detectors required by code, so removal of any of them would likely be a violation of that code. A violation of fire code may cause legal problems.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 26 Helpful 15
  • Question
    How are my alarms still managing to chirp even though I have removed them from the ceiling to disconnect them from the mains and removed the batteries?
    Hamza Hassan
    Community Answer
    Press the test button and problem solved. There was probably some power left in the device.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 13 Helpful 16
  • Question
    Smoke alarm contibues to chirp even with electric power off.
    Upnorth Here
    Top Answerer
    A periodic chirp in a smoke alarm typically means that there is a battery backup that has a low voltage (needing replacement) or an alarm that has reached the end of its useful life (assuming it is new enough to include such a feature). If you look up the details in the instruction manual for your particular unit, you may be able to determine which type of problem the chirp (and a perhaps a colored LED) is signalling.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 7 Helpful 8
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • The term "hardwired" may mean each unit runs on household voltage, whether or not they are connected to each other, which is called "interconnected".
        Thanks
        Helpful 0 Not Helpful 1
      • Some interconnected units may be battery-powered and communicate with each other using radio frequencies.
        Thanks
        Helpful 1 Not Helpful 0
      • Newer units may have non-removable batteries intended to last for 10 years or more. Such a unit should have a switch to permanently disable it for disposal.
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Remotely monitored smoke alarms or smoke detector systems may trigger an automatic response from an alarm company or the fire department when tampering or other malfunction is detected in any sensor.
        Thanks
        Helpful 3 Not Helpful 1
      • Some installation regulations may require that there be a "tamper-resistant" catch that prevents removal of a smoke alarm from its mounting bracket without permanently damaging it.
        Thanks
        Helpful 3 Not Helpful 1
      • In many places it may be a civil violation or a criminal offense to disable, remove or tamper with a smoke alarm or smoke detector unless you are authorized by the property owner or the fire department. You may also become liable for any injuries or property damage from a fire that could have been avoided if you had not disabled one or more smoke alarms.
        Thanks
        Helpful 4 Not Helpful 5
      • Before shutting off an active alarm, make sure there is no fire present. If there is, get out of the building immediately and call your emergency services hotline.
        Thanks
        Helpful 2 Not Helpful 6
      Advertisement

      You Might Also Like

      3 Ways to Tell the Difference Between a Smoke and Carbon Monoxide Detector
      Why Is Your First Alert Smoke Alarm Beeping/Chirping?
      Advertisement

      References

      1. ↑ https://www.consumerreports.org/smoke-alarms/how-to-reset-a-smoke-alarm-that-wont-stop/
      2. ↑ https://www.consumerreports.org/smoke-alarms/how-to-reset-a-smoke-alarm-that-wont-stop/
      3. ↑ https://www.getprepared.gc.ca/cnt/rsrcs/sfttps/tp201011-en.aspx
      4. ↑ https://www.tdi.texas.gov/tips/smoke-alarms-where-to-put-them-how-often-to-replace-batteries.html
      5. ↑ https://www.getprepared.gc.ca/cnt/rsrcs/sfttps/tp201011-en.aspx
      6. ↑ https://www.consumerreports.org/smoke-alarms/how-to-reset-a-smoke-alarm-that-wont-stop/
      7. ↑ https://www.consumerreports.org/smoke-alarms/how-to-reset-a-smoke-alarm-that-wont-stop/
      8. ↑ https://www.ready.gov/home-fires
      9. ↑ https://www.nfpa.org/Public-Education/Staying-safe/Safety-equipment/Smoke-alarms/Installing-and-maintaining-smoke-alarms
      1. ↑ https://www.consumerreports.org/smoke-alarms/how-to-reset-a-smoke-alarm-that-wont-stop/
      2. ↑ https://www.youtube.com/watch?v=20RwClPy8S4&feature=youtu.be&t=16s

      About This Article

      Article Summary X

      To disable a battery-powered fire alarm, start by locating the reset button on the front of the device. If there's not a reset button on the front, you may need to unscrew the alarm to get to the button on the back. Once you've found the reset button, hold it down for 15 seconds to disable the alarm. If that doesn't work, unscrew the alarm and remove the batteries to disable it. To learn how to disable a hardwired fire alarm, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 428,584 times.

      Did this article help you?

      Advertisement