How to Diagnose & Fix a Dishwasher Not Getting Water

PDF download Download Article
Get your dishwasher back in working order in no time
PDF download Download Article

If your dishwasher isn’t getting any water, don’t worry. The odds are that this is a very easy problem to fix. There aren’t that many potential explanations, and whether your dishwasher is brand new or older will help narrow it down dramatically. Read on to find out what’s keeping your dishwasher dry (and how to fix it).

Why Isn’t My Dishwasher Getting Water?

Check the dishwasher door to make sure it's closed all the way and confirm that the water supply valve under the sink is open. If the dishwasher still isn't getting water, make sure the drain hose is installed at the right height and angle. If needed, reinstall the hose and use zip ties to hold it in place.

Section 1 of 3:

Potential Causes & Fixes

PDF download Download Article
  1. Modern dishwashers will not turn on if the latch on the door isn’t closed correctly. Either there’s a mechanical switch your door isn’t reaching when you close the door, or your dishwasher has a sensor that checks to see if the door is sealed all the way and it’s not detecting that to be the case. [1]
    • Diagnosing the issue: Inspect the latch at the top of the door to see if it’s dirty or damaged. Try closing the door firmly and listen for a click.
    • Fixing the problem: Try closing the door firmly and running the cycle—you may just not be closing the door hard enough. If that isn’t it, try cleaning the latch with a wet cloth and closing the door again. If that also doesn’t work, the door probably isn’t the problem.
  2. If you just installed the dishwasher or you were working on your sink, you may have simply forgot to turn the water supply on. Your dishwasher links up to the sink’s water supply, but it usually has a separate, dedicated valve on the connection. [2]
    • Diagnosing the issue: Go under your sink and follow the supply line that runs from the back of your dishwasher to the water line in the wall. Turn that valve all the way to the left to open it up.
    • Fixing the problem: If the valve opens to the left, you’ve solved your problem. If the supply line was already open, this wasn’t the issue.
    Advertisement
  3. Drain hoses typically need to sit 20 inches (51 cm) off the floor or water can siphon back into the machine when it tries to drain. The drain hose also must have a slight dip the middle to prevent sewer gases from building up, but it can’t dip so low that water can’t get out. Any of these drain issues will prevent your dishwasher from working correctly. [3]
    • Diagnosing the issue: Open your dishwasher’s manual to determine what the drain hose clearance requirements are. Then, inspect the shape and angle of your drain hose to identify if there’s an issue.
    • Fixing the problem: Reinstall the drain hose so that it sits at an appropriate level. Use zip ties or cable management strips to hold the hose in place by tying it to the supply line above it under the sink.
  4. The inlet valve is the dampener that opens to allow water into the machine. If it’s filled with debris or it’s exceptionally old and it has locked up, water may not be able to enter your machine. [4]
    • Diagnosing the issue: Listen when your machine turns on. If you hear humming noises but there’s no water, your valve is probably blocked. The older your dishwasher is, the more likely the inlet valve is to fail, so keep the age of your dishwasher in mind.
    • Fixing the problem: You need a new inlet valve. Contact an appliance repair company to do the work. Alternatively, you can reach out to your dishwasher’s manufacturer and order a replacement to try repairing it yourself.
  5. The overfill float is a small assembly that raises up whenever water levels get too high in the dishwasher. When that happens, the machine automatically stops feeding water to the dishwasher. If the float gets stuck though, the dishwasher won’t fill with any water next time you go to use it. [5]
    • Diagnosing the issue: The float is usually disc-shaped and made of plastic. Look for a 2–4 in (5.1–10.2 cm) disc at the base of your machine. If it’s popped up, your float is stick.
    • Fixing the problem: Push the float up and down a few times to remove any mineral deposits. If this doesn’t fix it, contact a dishwasher repair company to have them rewire your float or replace it.
  6. Behind your dishwasher at the back (or under the kickplate on the front) there are a bunch of hoses. These drain, supply, and overflow hoses can get kinked and block water flow if you installed the dishwasher incorrectly. Alternatively, if the dishwasher is old, the hoses may be damaged or clogged. [6]
    • Diagnosing the issue: Visually inspect the hoses for kinks. If they’re especially old or dirty, it may be time to replace them. If there are any kinks, this is probably the source of your issue.
    • Fixing the problem: Remove any kinks by reinstalling the hoses. If the hoses are especially old, purchase fresh replacements and install them.
  7. Kitchen appliances often have dedicated fuses on your home’s electrical panel. If the fuse for your dishwasher happens to be blown,
    • Diagnosing the issue: Just check to see if the dishwasher is powering on at all. If it isn’t and you know it’s plugged in, you probably blew a fuse.
    • Fixing the problem: Go to the electrical panel and find the fuse for the dishwasher. If it’s flipped off, reset it. If this keeps happening in the future, contact an electrician.
    8. Advertisement
Section 2 of 3:

What if my top rack isn’t getting water?

PDF download Download Article
  1. The top rack gets its water from a dedicated spray arm underneath the top shelf. Physically remove the spray arm (it should pop off with a gentle amount of force). Then, rinse the arm under warm water while using a toothpick to scrape off any mineral deposits inside the holes. [7]
    • You can probably get away with using white vinegar to remove any calcium deposits too, but check your manual first to make sure it’s safe.
Section 3 of 3:

What if my dishwasher fills partway but stops?

PDF download Download Article
  1. Modern dishwashers have all kinds of sensors, controls, and components that help it clean dishes efficiently. If your dishwasher is only filling up partially and then shutting off, your machine could have a blown thermal fuse, electronic control board issues, or some other electrical problem. Consult a professional dishwasher repair company for repairs.
    2. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Use Dishwasher Salt
      3 Easy Ways to Reboot a KitchenAid Dishwasher
      How to
      Reset a Frigidaire Dishwasher
      How to
      Reset a GE Dishwasher
      How to
      Fix Your Bosch Dishwasher and Restart It
      How to
      Load a Dishwasher
      How to
      Fix a Dishwasher with Drainage Issues: Troubleshooting & Solutions
      How to
      Fit an Integrated Dishwasher Door
      How to
      Install a Built In Dishwasher
      How to
      Clean Fine China in a Dishwasher
      How to
      Install a Samsung Dishwasher
      Replacing a Dishwasher Water Inlet Valve
      How to
      Unclog a Dishwasher
      How to
      Use the Sanitize Setting on a Bosch SilencePlus 50 dBA Dishwasher
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about appliance repair, check out our in-depth interview with Trevor Storey .

      References

      1. ↑ https://bscappliancerepair.com/news/whirlpool-dishwasher-not-getting-water/
      2. ↑ https://www.solarappliance.net/news/dishwasher-isnt-filling-with-water/
      3. ↑ https://www.jlconline.com/how-to/plumbing/connecting-a-dishwasher-drain-hose_o
      4. ↑ https://www.solarappliance.net/news/dishwasher-isnt-filling-with-water/
      5. ↑ https://www.solarappliance.net/news/dishwasher-isnt-filling-with-water/
      6. ↑ https://lentheplumber.com/blog/why-is-my-dishwasher-not-filling-with-water/
      7. ↑ https://www.bosch-home.com/us/experience-bosch/heart-of-the-home/tips-and-tricks/all-articles/how-to-clean-dishwasher-spray-arms

      About This Article

      Thanks to all authors for creating a page that has been read 1,836 times.

      Did this article help you?

      Advertisement