PDF download Download Article
Troubleshoot and fix detergent pod issues with our repair guide
PDF download Download Article

If you notice the detergent pod sitting in your dishwasher after a wash cycle, we're here to help you figure out why it's not dissolving. Detergent pods can get trapped in the dispenser or stick around if the compartment is blocked or faulty, or if the water isn't running through the appliance correctly. Keep reading our helpful guide to learn what’s stopping your dishwasher pod from dissolving and how to fix it quickly.

Things You Should Know

  • If your dishwasher pod doesn't dissolve, rearrange any dishes or utensils that are blocking the detergent dispenser door and check to see if the latch is working.
  • Turn up the water temperature or replace your dishwasher’s heating element if the detergent pod hasn’t fully dissolved.
  • Check the sprayer arm, inlet valve, and circulation pump if the pod hasn’t dissolved and you don’t hear water moving through your dishwasher.
3

Faulty dispenser

PDF download Download Article
  1. If the dispenser has a broken latch or if one of the electrical connections isn’t triggering properly, the door won’t open to release the pod. [3]
    • Diagnosis: If the detergent pod is still inside the dispenser, then the door failed to open. Look for visible damage or cracks on the latch. If you don’t see any, then the door’s internal spring or motor may have failed.
    • The Fix: Replace the dispenser or faulty component. Because installing the new part requires you to disassemble your dishwasher door and rewire connections, hire a professional repair person to do it for you.
  2. Advertisement
4

Low water temperature

PDF download Download Article
  1. Your dishwasher uses hot water to help remove food residue and dissolve the detergent fully. If your machine doesn’t pull in hot water or if the heating element is faulty, then your dishwasher may not get warm enough. [4]
    • Diagnosis: Check if your dishes are hot at the end of the wash cycle. If they’re cold, then the water isn’t hot enough.
    • The Fix: Try running a wash cycle with a hotter temperature setting. If that doesn’t work, then adjust your water heater temperature between 120–150 °F (49–66 °C). If those don’t work, contact an appliance technician to replace the dishwasher’s heating element. [5]
5

Clogged or faulty inlet valve

PDF download Download Article
  1. The inlet valve connects to your water supply to fill the dishwasher during a wash cycle. If debris gets in the valve screen or if the valve isn’t working properly, then there won’t be enough water to dissolve the dishwasher detergent pod. [6]
    • Diagnosis: If you don’t hear water entering your dishwasher when you start a cycle, it may be the inlet valve. Remove the bottom panel from your dishwasher and locate the valve connected to a supply hose on the side of the machine. Use a multimeter to test the continuity of the valve connections. If the reading doesn’t change, the valve is faulty. [7]
    • The Fix: Replace the inlet valve with a functioning part. Avoid trying to clean the old valve because you could cause more damage to it.
  2. Advertisement
6

Damaged or clogged spray arms

PDF download Download Article
  1. The spray arms in your dishwasher spin and distribute water throughout the machine. If they’re not working properly or if the nozzles are clogged with food, the water pressure won’t be able to dissolve the pod completely. [8]
    • Diagnosis: Check the rotating spray arms on the top and bottom rack for cracks or damage. Check the holes on the dispenser arm for food residue or debris clogging the parts.
    • The Fix: First, rearrange tall dishes so they don’t stop the spray arms from spinning. Loosen the screw or bolt holding the spray arm in place, and remove it to clean the spray arm with cold water. Use a toothpick to pull out any blockages, then replace the spray arm.
7

Broken circulation pump

PDF download Download Article
  1. The circulation pump brings water to the spray arms in your dishwasher to complete the wash cycle. If the pump is faulty or has a poor connection, there won’t be enough water or water pressure to dissolve the detergent pod. [9]
    • Diagnosis: If you don’t hear water running through your dishwasher during a wash cycle, then the pump may be faulty.
    • The Fix: Replace the circulation pump. Because the pump is located behind your dishwasher and requires uninstalling the appliance, contact a repairperson to fix it for you.
  2. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • If you’re not able to diagnose the problem with your dishwasher on your own, contact an appliance technician to inspect and repair it for you.
      • If the dishwasher is working correctly, try switching to a different brand of dishwasher pods or use liquid or powder detergent.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Avoid tossing dishwasher pods in the bottom of your dishwasher instead of putting them in the dispenser because they may dissolve too soon and clean your dishes less efficiently.
      Advertisement

      About This Article

      Thanks to all authors for creating a page that has been read 17,815 times.

      Reader Success Stories

      • Anonymous

        May 26

        "I love wikiHow for practical, easy-to-understand advice."
      Share your story

      Did this article help you?

      Advertisement