How to Drive a Car in Reverse Gear

PDF download Download Article
PDF download Download Article

Driving in reverse can be intimidating to inexperienced and seasoned drivers alike. Because the wheels you use to steer are in front of you as you move backwards and your vision is obscured by the vehicle, backing up can be one of the tougher tasks faced by drivers. By driving slowly and paying close attention to your surroundings, you can improve your ability to drive in reverse.

Method 1
Method 1 of 3:

Backing Up in a Straight Line

PDF download Download Article
  1. A “360 degree check” is when you actively turn your head and shoulders to look all around your vehicle in a complete circle. Make sure there is nothing in your way or moving toward you that you may need to take into account before backing up. [1]
    • It’s okay to use your mirrors to aid in your check, but it’s important that you actively look around to ensure you don’t miss anything.
    • Make sure to look toward the ground on either side of your vehicle using your head and mirrors to ensure there are no people or animals laying in your path.
  2. When driving forward or in reverse, your right foot should be the only one on the gas or brake pedal. If your car is equipped with a standard transmission, your left foot manages the clutch, but in vehicle’s with automatic transmissions, the left foot simply goes unused. Press your right foot on the brake pedal firmly, so that the vehicle won’t move once it is in reverse. [2]
    • The brake pedal is in the middle on vehicle’s equipped with a standard transmission and is the furthest to the left in automatic vehicles.
    • The brake pedal is the widest pedal.
    Advertisement
  3. While it may be customary to drive with your hands at ten and two o’clock on the steering wheel, backing up will require that you turn your body to the right. Place your left hand at the top of the wheel so you can easily make small adjustments to keep the vehicle moving straight as you back up. [3]
    • It may be difficult to reach the steering wheel with your right hand while backing up, so steering with one hand is optimal.
  4. Depending on the transmission your vehicle came equipped with, there are a few ways you may need to shift into reverse. On automatic vehicles, it usually requires pressing a button on the shift lever and pulling it backward until it is aligned with the letter “R.” In standard vehicles equipped with a five speed transmission, you can usually shift into reverse by pressing the shift lever all the way to the left and pulling it backward. [4]
    • In vehicles equipped with six speed standard transmissions, reverse is usually all the way to the left and up, next to first gear.
    • Some cars require that you press down on the shift lever or press a release to access the reverse gear.
    • If you are unsure of how to shift into reverse, refer to your vehicle’s owner’s manual.
  5. Provided your view is not obstructed, twist your body to the passenger side so you can look out the back window of your vehicle over your right or passenger side shoulder. Make sure you do not remove your foot from the brake pedal. If you are driving a box truck or other vehicle that blocks your view out the back window, you will have to rely on your side mirrors to guide you. [5]
    • You may choose to place your right hand on the top of the passenger seat to help you comfortably look out the back.
    • If you are relying on your mirrors, make sure to check each of them frequently.
  6. As you take the pressure off of the brake pedal with your right foot, the vehicle will begin to move backward. Most vehicle’s engines idle at a high enough RPM (revolutions per minute) to propel the vehicle without any need to apply the gas. Keep your foot hovering over the brake pedal as you back up just in case you need to stop or slow down. [6]
    • Ease off the brake slowly to ensure you do not accelerate too quickly to easily manage..
    • If your vehicle is equipped with a standard transmission, you will need to use the gas as you ease off the clutch, but can then allow the vehicle to idle.
    7. Advertisement
Method 2
Method 2 of 3:

Turning as You Back Up

PDF download Download Article
  1. The dynamic of driving in reverse is quite different than that of normal driving because the wheels you turn to steer are at the front of the car. As you back up, make small adjustments by turning the wheel in the direction you want the back of the car to turn toward.
    • Turning the wheel to the left as you back up will cause the back of the car to go left and vice versa.
    • Stop the car if you feel uneasy about the direction it is heading, then set off again once you’ve gained control.
  2. As you turn the vehicle, the front end of the car will swing in the opposite direction the back end is turning. Check the area around the front of the car frequently as you back up slowly to ensure you don’t hit or run over anything with the front wheels.
    • If you are turning left as you back up, the front of the car will swing to the right, and vice versa.
    • Make sure you are going slowly enough that you can check the front of the car for clearance without hitting anything.
  3. If you are backing up a hill or need to turn, you may need to utilize the gas pedal occasionally while backing up. Once your right foot is completely off of the brake, move it over the gas pedal to the right of the brake. Press down on the pedal slowly to control the amount of speed you pick up as you back up. [7]
    • Make subtle adjustments to your speed by applying pressure to the gas pedal.
    • Bring your foot back to the brake once you have gained sufficient speed or if you need to slow back down.
  4. If you need to turn around an obstacle while backing up, you may want to use both hands to manipulate the steering wheel. Using one hand, you can usually only turn the wheel up to ninety degrees in each direction, so if you need to take a steeper turn, using both hands may help. Make sure that you can still see behind you as you place your right hand back on the wheel if you need to.
    • Never cross your hands over one another while turning the wheel. Instead push the wheel with one hand and pull it with the other.
  5. Backing up can feel quite different than driving forward, and your view is often compromised by the back of the car and a limited view out of your window. Do not hurry yourself while backing up and instead take your time to prevent accidents.
    • Never drive your vehicle in a manner that feels unsafe.
    • Feel free to stop the vehicle and take a minute if you feel uncertain about what you’re doing.
  6. When you’ve backed up far enough, press your foot back down on the brake pedal gradually to come to a smooth stop. Be careful not to apply too much pressure too quickly, or you will stop the vehicle abruptly. [8]
    • Use only your right foot to apply the brakes in your vehicle.
    • Keep your foot pressed on the brake once the vehicle has stopped.
  7. With your foot firmly on the brake pedal, press the button the shift lever in automatic vehicles and press it forward until it is aligned with the “P” that indicates that it is in park. In standard transmission equipped vehicles, simply take the shift lever out of gear (in neutral) and apply the parking brake by pulling up on the handle or pressing down on the pedal. [9]
    • If you are unsure where to locate your parking brake or how to engage it, refer to the vehicle’s owner’s manual for guidance.
    8. Advertisement
Method 3
Method 3 of 3:

Backing Up Using Your Mirrors

PDF download Download Article
  1. If you cannot see out the back of the vehicle, you will need to use your side mirrors to see as you back up. Before you begin, adjust your side mirrors to ensure you can see the side of the vehicle, the ground, and anything coming up from behind you. [10]
    • In many cars you can adjust both mirrors from the driver’s seat, but in some you may need to adjust them manually by hand on each side.
  2. Using mirrors will only show you what is behind your vehicle on either side, so it’s important to check both sides often. This will prevent you from accidentally hitting something, or from not noticing as someone approaches from one side or the other. [11]
    • You likely will need to drive even slower in reverse when using mirrors to be sure you don’t miss anything.
    • It may help to pay closer attention to the mirror on a side with an obstacle, so you can keep your eyes on it.
  3. If you are backing up using only your mirrors in a difficult area, you may choose to ask a friend to guide you. Using your mirrors to keep an eye on a friend that is checking your clearances from the back may be your best option when driving a box truck or something else with severely limited visibility. [12]
    • Have your friend stand behind the vehicle on one side to ensure you can see them as they guide you.
    • Make sure to open your windows and turn off the radio to hear your friend’s instructions as you back up.
    4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I use the wiper and lights in the car?
    Community Answer
    Your car's manual should have specific instructions telling you where to locate these commands, but they are often located on or next to the steering wheel.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 11 Helpful 36
  • Question
    When in reverse, if the car is moving to the right, should I turn left or right to correct it?
    Community Answer
    You should turn your wheel to the left. This will pull you out of backing to the right.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 17 Helpful 58
  • Question
    Once in reverse gear, my car starts moving. Is this normal?
    Community Answer
    Yes. It is normal for your car to idle when in any gear.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 23
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Drive a Car
      How to
      Drive a Car Safely
      How to
      Pass Your Driving Test
      Driving an Automatic Car: Your Full Step-by-Step Tutorial
      How to
      Reverse Into a Parking Space Like a Pro
      How to
      Adjust Seating to the Proper Position While Driving
      How to
      Start a Car
      Learn How to Drive (for Beginners)
      How to
      Steer Your Car
      How to
      Adjust Car Mirrors
      How to
      Properly Use Your Turn Signals on the Road
      How to
      Stop at a STOP Sign
      How to
      Park on a Hill
      How to
      Drive Uphill
      Advertisement

      References

      1. ↑ http://drivinginstructorblog.com/reversingbacking-basics/
      2. ↑ http://drivinginstructorblog.com/reversingbacking-basics/
      3. ↑ http://drivinginstructorblog.com/reversingbacking-basics/
      4. ↑ http://drivinginstructorblog.com/reversingbacking-basics/
      5. ↑ http://drivinginstructorblog.com/reversingbacking-basics/
      6. ↑ Onerli, Ibrahim. Personal interview. 18 November 2019.
      7. ↑ http://drivinginstructorblog.com/reversingbacking-basics/
      8. ↑ http://drivinginstructorblog.com/reversingbacking-basics/
      9. ↑ http://drivinginstructorblog.com/reversingbacking-basics/
      1. ↑ https://rv-roadtrips.thefuntimesguide.com/2011/08/rv-mirrors.php
      2. ↑ https://rv-roadtrips.thefuntimesguide.com/2011/08/rv-mirrors.php
      3. ↑ https://rv-roadtrips.thefuntimesguide.com/2011/08/rv-mirrors.php

      About This Article

      Article Summary X

      To drive a car in reverse gear, start by doing a “360 degree check” where you turn your head and shoulders to look around your vehicle, making sure nothing is in your way or moving toward you. Next, place your right foot on the brake and put your left hand on the top middle of the steering wheel. Then, put the vehicle in reverse, look out the back window over your right or passenger side shoulder, and slowly ease your foot off of the brake to move backwards. To learn more, like how to turn as you back up, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 931,474 times.

      Reader Success Stories

      • Akeneta Marama

        Apr 7, 2017

        "I'm learning to drive at 57, and often muddle up which side to turn the wheel when in reverse gear. Reading ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement