How to Get Water Out of Carpet Quickly

PDF download Download Article
The best ways to clean up water-logged carpet
PDF download Download Article

Whether it’s because of a flood, a burst pipe, or rainy weather, wet carpet is never a fun surprise. Fortunately, by acting fast and using the right tools, you can banish mold and mildew and get back to your fluffy, fuzzy carpet again. No matter if you’re drying out a small carpet, wall-to-wall carpeting, or the inside of your car, we’ve got you covered. Here are the best tips for drying wet carpet fast.

Things You Should Know

  • Use a wet-vac to suck up as much excess water as possible.
  • Place fans and dehumidifiers around the room to create air flow.
  • If there is water underneath the carpet, peel the carpet up and point a fan beneath it.
Method 1
Method 1 of 3:

Drying Carpet Quickly

PDF download Download Article
  1. Walk back and forth over the toweled area until the towels are completely saturated. Take those towels away and replace them with dry towels in the same area. [1]
    • This is a good technique for small spills or when your carpet is just slightly damp. If you’re dealing with a flood or a burst pipe, move onto the next step.
    • Check underneath the carpet to make sure the carpet padding and the floor aren't sopping wet.
    • If the carpet is only slightly damp, sprinkle baking soda over the area, then let it sit for 24 hours to let it soak up any moisture. Then, vacuum the baking soda up.
  2. Rent a wet-dry vacuum from your local hardware store or use one that you already have. Vacuum the carpet with the wet vacuum until no more water comes out. [2]
    • Make sure you use a wet-dry vacuum, not a regular home vacuum. [3]
    • The wet vacuum cleaner removes water from the carpet itself, but it may not be able to remove it from the padding if the water has wicked through the carpet backing or soaked in under the edges.
    • Keep an eye on the fill tank and make sure you dump it before hitting overflow. Depending on the amount of water in the carpet, you may have to dump the tank several times.
    Advertisement
  3. Use fans and dehumidifiers to evaporate the moisture. Bring any fans you have into the room and turn them on. Open the windows and use a dehumidifier to dry out the area as quickly as possible.
    • Again, check underneath the carpet to make sure that the floor and carpet padding are not still sopping wet.
    • Try to create a "vortex" around the wet area. For example, you might take 3 fans and arrange them in a triangle around the wet area, all blowing outside of center instead of directly across the wet area. You could also rent air movers and professional dehumidifiers from a big box store. [4]
    • If the weather is warm, open neighboring windows to allow the humidity to escape. [5]
  4. After your carpets are completely dry, you may still notice a slightly musty odor. Use a carpet cleaner to steam clean your carpets and remove any smells that might have stuck around. [6]
    • Carpet cleaners are great for removing stains and odors, but they can’t tackle mold or mildew that’s beneath the carpet. If your carpet is wet underneath, use the method below to dry it out.
    5. Advertisement
Method 2
Method 2 of 3:

Drying Wall-to-Wall Carpet

PDF download Download Article
  1. Do this so that you can lift up the carpet and check the pad and the floor underneath. It's important to remove the furniture as quickly as possible so that you can get started on the carpet. [7]
    • Leaving the furniture on the wet carpeting can damage both the furniture and the flooring.
  2. Rent a wet-vac (or use one that you already own) to vacuum up as much of the water as possible. Go over the carpet several times until the vacuum no longer sucks up water.
    • Or, use a hot water extraction unit, which is similar to a wet-vac but can hold more water. Check with a local carpet cleaning company to see if you can rent theirs.
  3. Getting rid of the water on top of the carpet is only the beginning. Walk across the carpet, and listen carefully. If you hear a sopping or squishing sound, then there’s likely water beneath the carpet itself.
    • Leaving water underneath the carpet could cause the floor to buckle or mold to develop.
  4. Start in a corner. Using pliers and a pair of work gloves, start separating the carpet from the padding and the floor. Avoid cutting the carpet, because it will be incredibly difficult to put back together attractively. [8]
    • You can also lift the carpet up pulling it off of the installation strips at one of the corners. Do this on a carpet's side or edge if you have a short side that is easy to access and work with.
    • Fold the corner or side of the rug over so you can see the carpet pad.
    • If you are pulling up carpet after a flood or sewer overflow , wear gloves and a respirator mask. There may be germs inside of the carpet that could be detrimental to your health.
  5. Try to dry the pad without removing the carpet, especially if the pad seems to have only gotten a little damp and the subfloor seems dry. Keep the corner or side of the carpet that you have lifted raised and use an industrial fan to blow air under the carpet onto the pad. Turn up the heat and open the windows to aid in the drying.
    • Use a dehumidifier to dry the carpet out even faster.
    • Attach a vacuum hose (for vacuuming up wet things) to the exhaust of a vacuum, then put the hose under the carpet, placing the carpet back over the hose. The hot air will cause the carpet to float over the pad and speed up the drying process.
  6. The pad beneath the carpet is most prone to mold and mildew. If you can’t get the padding dry after 24 hours or it starts to develop mold, unfortunately, you need to replace it. You can either install the padding yourself or hire a professional to do it.
  7. In the end, one of the best ways to deal with a wall-to-wall wet carpet is to call in someone who knows how to deal with it. It's important to do this as soon as possible so the company can salvage as much of the carpet, floor, and padding as possible. [9]
    • Make sure the service is guaranteed and look for a company that promises to dry the carpet, the pad, and the floor if necessary.
    • Check with your homeowners or renters insurance. Depending on the cause of the wet carpet, it is possible your policy may cover the cost of the carpet cleaning.
    8. Advertisement
Method 3
Method 3 of 3:

Drying a Carpet in the Car

PDF download Download Article
  1. Mold can grow in as little as 1 day and cause lots of problems, so dry the carpet in your car as quickly as possible. [10] This will not only make sure that you avoid the mold, but it means that water won't get into electrical places that it shouldn't.
  2. Only dealing with the carpets in your car without locating and stopping the leak isn't going to do you much good. [11] You'll have to keep on drying your carpets constantly. Look around your car and try to figure out where the leak is coming from, then patch it up or take it to a mechanic.
    • Many cars develop leaks because the seals around the doors or windows aren’t tight anymore.
  3. Remove as much water as possible with a wet-vac . Use a vacuum that can remove water, or a dehumidifier (or both). Use them to remove as much of the water as you can, especially from carpeting that can't be easily removed. [12]
    • Leave the dehumidifier in the car until the water seems to be gone.
    • Sop up water with rags on the non-carpeted areas of the car.
  4. Water has a tendency to pool in the padding under the carpet. Not dealing with this can create mildew and mold problems. Start by peeling up the carpet from a corner using pliers and work gloves.
    • Avoid cutting the carpet as this will be incredibly difficult to fix later on.
  5. Remove all the carpeting from the car. It's really important that you remove the carpeting from the car, especially if the problem is an ongoing one. Use a wrench to remove all the seats and seat belts, then peel up the carpeting. Put it somewhere that it can dry, like over a sawhorse or a drying rack outside. [13]
  6. Once you've removed the carpeting from the car, work on drying it completely. Place towels over the carpeting and walk over them to get the water to soak up into the towels. Replace with fresh, dry towels as they get wet. Use a hairdryer or a fan and position it over the wet towels. Keep doing this until they are completely dry. [14]
    • Once the carpet is dry, reinstall it by placing it back in the car and spreading it out until it’s smooth. Then, reattach the seats and seatbelts with the hardware you removed earlier.
  7. Replace the carpets if you can’t get the water out. Sometimes the absolute best thing you can do is replace the carpet, especially if you or anyone in your family is sensitive to mold. It doesn't take long for mold to grow and once it's there, it is very hard to get rid of. [15]
    • Discuss this with a professional before you do a complete overhaul of your car's carpeting.
    8. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Can wet carpet be saved?
    Andrew Rohr
    Carpet Cleaning Specialist
    Andrew Rohr is a Carpet Cleaning Specialist and the President of MSS Cleaning out of Denver, Colorado. With over five years of cleaning experience, he specializes in carpet cleaning, stretching, and repairs as well as upholstery cleaning, water damage restoration, and tile and grout cleaning. Andrew holds a BA in Psychology and Business Administration from The University of New Hampshire and an MBA in Corporate Finance from The University of Denver.
    Andrew Rohr
    Carpet Cleaning Specialist
    Expert Answer
    It depends. Anything that touches black water (sewage) likely needs to be thrown out. This includes carpet and padding. With clean water, the carpet can typically be saved, but the carpet pad may or may not make sense to save.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 8
  • Question
    What should I do if I can't lift up the carpet and can't get a water vacuum in order to suck up the water? What do I need to do to make sure it doesn't turn into mould?
    Community Answer
    Use a cotton bed sheet to soak up all the water, then spread layers of newspaper over it. Try to press using a heavy object, done two or three times until most of the water is absorbed. Again cover it with newspaper and leave it overnight under a fan and it will dry soon. You can use a heater fan but only when you are present, to ensure that nothing goes wrong.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 13 Helpful 29
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Read Video Transcript

      Tips

      • It really can be better and less money in the long run to call in a professional right away. They know how to best deal with wet carpeting, especially difficult wet carpeting.
        Thanks
        Helpful 1 Not Helpful 5
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Whether you have to remove the carpet or not, the carpet and pad may shrink and seams may separate from the excess water. A professional carpet company will be able to do any needed repairs.
        Thanks
        Helpful 0 Not Helpful 0
      • If your carpet is wet with dirty water, remove it all as quickly as possible. Add more clean water to the wet carpet before vacuuming the dirty water out.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Clean Carpet with a Steam Cleaner
      How to
      Remove Red Wine from Carpet
      6 Creative Ways to Display a Rug on Your Wall
      How to
      Clean a Carpet Without a Vacuum
      How to
      Prevent Carpet Dents
      How to
      Remove Furniture Dents from Carpet
      How to
      Raise Flattened Pile Carpet
      How to
      Stretch Carpet
      How to
      Fluff Up Carpet
      How to
      Patch Carpet with Adhesive Discs or Heat-Activated Pads
      How to
      Brighten Faded Carpet and Rugs
      How to
      Repair Cigarette Burns in Carpet
      Advertisement

      References

      1. ↑ https://www.cleanipedia.com/gb/floor-and-surface-cleaning/how-to-dry-wet-carpet.html
      2. ↑ https://www.epa.gov/mold/mold-course-chapter-4
      3. ↑ Andrew Rohr. Carpet Cleaning Specialist. Expert Interview. 15 April 2021.
      4. ↑ Andrew Rohr. Carpet Cleaning Specialist. Expert Interview. 15 April 2021.
      5. ↑ Andrew Rohr. Carpet Cleaning Specialist. Expert Interview. 15 April 2021.
      6. ↑ https://www.cleanipedia.com/gb/floor-and-surface-cleaning/how-to-dry-wet-carpet.html
      7. ↑ https://www.cleanipedia.com/gb/floor-and-surface-cleaning/how-to-dry-wet-carpet.html
      8. ↑ https://www.youtube.com/watch?v=RKFC1easMKA
      9. ↑ Andrew Rohr. Carpet Cleaning Specialist. Expert Interview. 15 April 2021.
      1. ↑ https://www.fema.gov/pdf/rebuild/recover/fema_mold_brochure_english.pdf
      2. ↑ https://www.drbeasleys.com/blog/2013/11/21/the-detail-water-leaks-a-case-study/
      3. ↑ https://www.shell.com.au/motorists/go-well-content-hub/how-to-clean-and-dry-flooded-car-carpet.html
      4. ↑ https://www.youtube.com/watch?v=FenrAqHy6YY&t=91s
      5. ↑ https://www.shell.com.au/motorists/go-well-content-hub/how-to-clean-and-dry-flooded-car-carpet.html
      6. ↑ https://www.nachi.org/carpet-mold.htm

      About This Article

      Article Summary X

      If you get your carpet wet, it’s important to act fast to keep it from getting moldy or musty. Start by laying some clean, dry towels down on top of the wet area. Walk back and forth over the towels or push on them with your hands to help them soak up as much water as possible. If the towels become soaked through, remove them and replace them with fresh ones. If you have a wet/dry vacuum cleaner, use that to pull as much of the remaining water out of the carpet as you can. Keep going over the area with the vacuum until you don’t see any more water going into the tank. If the carpet is really soaked, keep an eye on the tank and make sure to dump it before the water reaches the overflow line. Once you’ve gotten the carpet as dry as possible, encourage the rest of the moisture to evaporate as fast as possible by going over the carpet with a hair dryer or aiming one or more large fans at the wet area. If it’s a warm, dry day, open the windows to let air circulate through the room. You can also rent a dehumidifier or industrial fan from a big box store and put it in the room to help dry out the carpet faster. Don’t forget to check under the carpet to make sure the padding or underlayment underneath hasn’t gotten wet as well. If it has, you may need to replace it or temporarily remove the carpet to let it dry. If you’re dealing with a wall-to-wall carpet that has gotten completely soaked, your best bet may be to call in a carpet-cleaning professional. For tips on drying carpet in your car, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 1,170,538 times.

      Reader Success Stories

      • Theresa Elliott

        Oct 3, 2016

        "How to dry wall to wall carpet was helpful. I had water overflow from the toilet. It was clean water but it went ..." more
      More reader stories Hide reader stories
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement