How to Embalm

Co-authored by Cheyenne Main

Last Updated: June 18, 2024 Fact Checked

Part artists and part scientists, embalmers provide a necessary service in funeral homes by sanitizing, preserving, and restoring the deceased to a more life-like appearance. It's a delicate and complex procedure. Read on to learn more about the world of embalming.

Part 1

Part 1 of 5:

Preparing the Body

Download Article

^{[1]
X
Research source} If the body is front-side down, gravity will pull the blood down to the lowest parts of the body, particularly the face. This can discolor and bloat the facial features, making it more difficult to create a life-like appearance for the viewing. ^{[2]
X
Trustworthy Source
PubMed Central
Journal archive from the U.S. National Institutes of Health
Go to source}
2
Remove any clothing that the person is wearing. You will need to see the skin for signs that embalming is working, so the body will remain uncovered throughout the procedure. Also remove any IV needles or catheters that are in place. ^{[3]
X
Research source}
- Typically, you'll need to catalog any property found on the person, as well as any cuts, bruises, or other discolorations at this time on your embalming report. This will also be used to document the procedure and chemicals used in the process. The report acts as insurance if the family chooses to sue the funeral home for any reason.
- Respect the body at all times. Use a sheet or towel to cover the genitals, and don't leave tools laying around on it while you're working. Assume the family may pop in at any moment.
Advertisement
3
Disinfect the mouth, eyes, nose, and other body openings. Wash the entire body with a germicidal soap or detergent. ^{[4]
X
Research source} Spray a powerful disinfectant to clean bodily openings, open wounds, and other necessary surfaces. ^{[5]
X
Research source}
- Inspect the deceased in regards to the type of fluid you will need. Some embalmers will use this opportunity to mix all the fluid they'll need for the procedure to get it ready. Usually, 16 ounces of fluid with 2 gallons (7.6 L) of water is a good dilution.
Typically, the face and body are shaved at this point. ^{[6]
X
Research source} Men, women, and children are shaved to improve the look of the makeup. However, if the person had facial hair, the hair stays. ^{[7]
X
Research source}
Massage the major muscle groups to relieve the tension and move stiff joints to loosen them up. Even though rigor mortis goes away naturally, massaging the body helps to postpone it or move the process along. ^{[8]
X
Research source}

Part 2

Part 2 of 5:

Setting the Features

Download Article

1
Close the eyes. Use great care in setting the eyes. Place an eye cap on each eye to set the eyelids in place. ^{[9]
X
Research source}
- Eyelids are never sewn shut but may be glued shut in some cases.
- The features need to be set before the embalming fluid is introduced, because that fluid will "set" the body fairly rigidly, making it difficult to do it afterward.
2
Close the mouth and set it naturally. One of two methods is typically used to set the mouth: ^{[10]
X
Research source}
- Sometimes, the mouth is sewn shut using mandible suture. Pass a curved needle through the jaw under the gums and back up through the septum. Place dentures, a mouth former, or cotton inside to help shape the mouth. Tie the string into a bow. ^{[11]
  X
  Research source}
- A needle injector is also commonly used in conjunction with a mouth form. Like a mouthguard or a dental prosthetic, the mouth form holds the jaw together to create a natural bite and alignment of the jaw. ^{[12]
  X
  Research source} This method often includes less room for human error.
Apply a small amount of massage cream to the face and hands to keep the skin soft and pliable.

Part 3

Part 3 of 5:

Embalming the Arteries

Download Article

The arteries are embalmed by simultaneously introducing embalming fluid (a mixture of formaldehyde, other chemicals, and water) into the carotid or femoral artery while draining the blood from a nearby vein or from the heart. It takes about two gallons of fluid to embalm a typical body. ^{[13]
X
Research source}
2
Make your incision. Clean the vein point off, create an entrance point, and insert the drain tube towards the heart. Tie a ligature around the lower side of the tube. ^{[14]
X
Research source}
- Do the same for the artery except insert the cannula instead of a drain tube. Place the cannula forceps on the artery locking the cannula in place. Use the small locking forceps to clamp off the upper side of the artery and restrict the flow.
3
Turn on your embalming machine and distribute the fluid. While the embalming is taking place, wash the body with a good germicidal or antibacterial soap and be sure to check for drainage while massaging the limbs to push blood out and embalming solution in. ^{[15]
X
Research source}
- When the fluid enters the arteries, pressure will build throughout the veins, which means the fluid is moving throughout the body. You'll notice the veins bulging somewhat. Open the jugular drain tube periodically to allow blood to escape and relieve the pressure.
4
Slowly decrease the pressure. Once the area is thoroughly embalmed, turn off the machine and reverse your arterial tube to the other side of the artery you chose to inject. ^{[16]
X
Research source} This will embalm the part that was blocked by the arterial tube previously. Be sure to turn down the pressure, as the fluid only has to go a short distance.
- In the case of the femoral, this will embalm the lower leg. In the case of the right common carotid, this will embalm the right side of the head.
When you've embalmed to your satisfaction, or run out of fluid, turn off the machine, remove the cannula, and tie off the veins and arteries you used. Suture the incisions closed. Use sealing powder or putty to ensure there is no leakage. ^{[17]
X
Research source}

Part 4

Part 4 of 5:

Embalming the Cavity

Download Article

Now that the arteries have been embalmed, you need to suction any liquids or gasses inside the organs in a process called aspiration. ^{[18]
X
Research source}
Insert the trocar 2 inches (5.1 cm) to the right and 2 inches (5.1 cm) superior to the umbilicus (belly button). ^{[19]
X
Research source} Clean out the hollow organs in the abdomen such as the stomach, pancreas, and small intestine.
Remove the trocar, turn it around, and insert it into the lower body, aspirating the contents of the large intestine, bladder, and in the case of females, the uterus. The anus and vagina are sometimes packed with cotton to avoid seepage.
4
Inject cavity fluid into the torso. Attach a 16 ounce bottle of cavity fluid to the other end of the bottle injector. The gravity injection method is typically used to push the cavity fluid into the hollow organs, sterilizing and preserving them. ^{[20]
X
Research source}
- Make sure you get both the upper and lower organs. This step is crucial in preventing "purge."
^{[21]
X
Research source} Clean out your trocar and put it away.

Part 5

Part 5 of 5:

Casketing the Body

Download Article

Using the same disinfectant used earlier, clean the body thoroughly to remove any blood or other chemicals left behind by the embalming process. ^{[22]
X
Research source} Use delicacy and care in this process.
Lifelike makeup will be applied to the face and hands, the fingernails will be clipped, and the hair should be styled and groomed.
3
Dress the body. Generally, the deceased's family will choose the clothes to be worn in the casket. Dress the body carefully and appropriately. ^{[23]
X
Research source}
- Sometimes plastic underwear is used to protect especially leaky bodies.
Arrange the body peacefully. Consult the family for any advice or further instructions regarding the presentation.

Community Q&A

Search

Add New Question

Question

How much money do you make as an embalmer?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

The amount of an embalmer's salary depends on the level (beginner through to senior), the specific employer and local pay conditions. However, a rough estimate is between USD$30,000 and $50,000 per year (pre-tax).

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 11 Helpful 18
Question

Do you have clothes on when you are cremated?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

Normally the body is dressed before it is cremated. You can request specific clothes if you wish, talk to your family and/or the funeral director about your preferences.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 8 Helpful 24
Question

What does an undertaker do to the body?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

The undertaker prepares the body for the funeral and for burial. A body will only be embalmed if the family requests this, and if so, the body will be embalmed by a mortician. The undertaker dresses the body (in accordance with the family’s requests) and places it into the coffin or casket that the family has chosen. Then they take the body to the place where the funeral is being held. The undertaker is guided by the family’s wishes, religious requirements and cultural needs.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 11 Helpful 30

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Dye in embalming solution is used to give the body a more life-like skin tone. ^{[24]
X
Research source}

Thanks
Helpful 4 Not Helpful 0
Make sure the body is in a desirable position when you finish embalming. Once the chemicals take full effect, the body will be frozen until decomposition resumes.

Thanks
Helpful 4 Not Helpful 0
Respect, respect, respect. This person used to be alive, and someone probably cared about this person very much. You are being trusted to take good care of somebody's loved one. Don't let them down; they're paying a lot for you to do this, despite whatever money you're making!

Thanks
Helpful 5 Not Helpful 0

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Formaldehyde is a possible carcinogen. Take precautions to minimize exposure.

Thanks
Helpful 149 Not Helpful 62
Embalming a body is illegal if you do not have a license, PPE (personal protective equipment) as required by OSHA, and permission to embalm from the executor.

Thanks
Helpful 144 Not Helpful 78
Working with the insides of a human body can expose you to biohazardous material. Make sure you discard disposable objects that contact the body in a clearly marked biohazard container and take suitable precautions to protect yourself.

Thanks
Helpful 162 Not Helpful 95

Things You'll Need

Certification and licensure in compliance with local ordinances and state laws.
A table that can hold a person, although the floor works well if you want to be on your knees for an hour.
Arterial tubes, or cannula, are inserted into major arteries into which you can inject embalming solution.
A scalpel
Scissors, for cutting important stuff.
A roll of medical-grade string, called ligature.
A curved needle for sewing incisions.
A large sink into which blood can be drained and water can be accessed.
A water aspirator, or Hydro Aspirator, to create negative pressure. It is attached to the faucet of the sink, and has a hose coming from one of it's openings that leads to:
A trocar; this is a long, sword-like needle that is connected to the hydroaspirator which is used to puncture and aspirate the hollow organs which embalming fluid cannot reach arterially.
A few bottles of mixed embalming solution; formaldehyde is most common, but there are substitutes.
An aneurysm needle/hook. This is a metal tool with a flat handle and a long point that bends 90 degrees at the end.
Cotton, cotton, and more cotton.
Eye caps (concave round disks that hold the eyes shut from underneath.
There are many other tools that are useful to embalmers, but they are for the most part optional. Even some of the tools mentioned are optional.

You Might Also Like

[1]

[2]

Trustworthy Source

Go to source

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

[20]

[21]

[22]

[23]

[24]

Log in

How to Embalm

Steps

Preparing the Body

Setting the Features

Embalming the Arteries

Embalming the Cavity

Casketing the Body

Community Q&A

Tips

Warnings

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories