How to File Metal

PDF download Download Article
PDF download Download Article

Metal files are relatively inexpensive and effective tools for reshaping and smoothing metal and hard plastics, offering the potential for high precision and many years of trouble-free use. Be sure to select the right kind of file for the job, and keep it clean and oiled. You can straight file, cross file, or draw file, depending on whether you want to remove material, do detail work, or create a smooth surface.

Part 1
Part 1 of 2:

Choosing and Preparing Your File

PDF download Download Article
  1. In general, large files are relatively coarse. They leave a rougher finish, but remove more stock. Conversely, smaller files are finer. They remove less stock, but leave a smoother finish. [1]
  2. Use a flat file for general purpose work, a square file for enlarging rectangular holes, and a round file for enlarging round holes. Use a triangular file on acute angles, and a half-round file to smooth curved faces of grooves.
    Advertisement
  3. A bastard-cut file has the highest degree of coarseness, while a second-cut file has a medium degree of coarseness. A smooth-cut file is the least coarse option. [2]
  4. For fast removal of stock, choose a double-cut file. For finishing, use a single-cut file. Choose a rasp-cut for rough cuts of soft materials, and a curved-cut file for automotive body work. [3]
    • Use a double-cut file to file brass, bronze, copper, and tin. These tough metals should be filed with a double-cut file as they are strong enough to withstand the metal and/or alloy.
    • Rasp-cut files can be used for wood as well as lead and aluminum. This file has a series of individual teeth and produces a rough cut.
  5. Be sure that the file you choose to use is whole, rather than broken or chipped. Ensure the handle is intact and not loose. Check the teeth to be sure they aren’t broken, and look for rust, which should be removed before using the file.
    • Soak your file in distilled white vinegar overnight to remove the rust. Then wipe off any residue and thoroughly dry the file before using it. [4]
  6. There should not be any pins (bits of filed metal) stuck in the teeth. If there are, clean them out with a file card, stiff wire brush, or a piece of skinny wire or sheet metal. You can also use a scrap piece of hardwood to clean your file by pressing the wood against the file and scraping it along the grooves. [5]
    • You should clean your file often while you are working as well. Aim to stop and clean your file every 15 strokes or so to prevent pinning. [6]
  7. Liberally rub chalk, or a small amount of lard or general-purpose oil, into the teeth of the file. This makes the file less likely to become clogged with pins in the future, as well as reduces the amount of metal dust when filing, and also protects the file.
    • You may want to wear gloves when applying chalk, oil, or lard to your file to keep your hands clean.
    8. Advertisement
Part 2
Part 2 of 2:

Using the Right Filing Technique

PDF download Download Article
  1. It is important to secure your work with a vise or other clamp to keep it from moving around while you are filing. Mount the vise so that the stationary jaw extends slightly beyond the edge of your workbench, and be sure to place bolts in all the holes on the base of the vise and secure them with locking washers. Then, place the workpiece in the vise so that it is supported by the full clamping surface. [7]
  2. You don’t want to use a back and forth motion with your file, as this will damage the file and likely your workpiece as well. Instead, only apply pressure on the forward stroke and lift the file away from the workpiece on the return stroke.
  3. For heavy cross filing, grab the handle of the file with the dominant hand and place the palm of the other hand on the end of the file. Angle the file diagonally to the work and press down firmly so that the file digs in and cuts the metal. Make long, slow strokes away from your body. Lift the file away from the surface on the return stroke to prevent dulling the file. [8]
  4. For straight filing, use a small file rather than a large one. Grab the handle of the file with the dominant hand and place the fingers of the other hand on the end of the file. Point the file away from you and press it down firmly on your workpiece. Make long, slow strokes away from your body, and only file in one direction, rather than back and forth. [9]
  5. For draw filing, place your hands on either side of the file with a gap slightly larger than your workpiece. Hold the file horizontally and make long, slow strokes away from your body with a firm pressure. Remember to only apply pressure on the forward stroke, and to remove the file on the backward stroke. [10]
    6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What is the proper way to hold a file?
    Community Answer
    For right handed people hold the handle firmly in your right hand then leave you left hand open and place it on the end of the file (switch hands if left handed). When filing put your right hand down to the right and left hand up to the top left (as if looking at it top down) then place it on the bottom left of the material and drag it along to the top right of the material applying a bit of pressure with both hands onto the file in the process as you do the motion. . Make sure to use the entire length of the file to get a good finish
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 7 Helpful 6
  • Question
    Which type of file is used to remove hard materials faster?
    Community Answer
    Use a bastard-cut or second-cut file to quickly remove hard materials. These files are more coarsely cut and will remove more material than a single-cut or other type of file.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 9
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If filing cast iron, be sure to knock the scale off first! It is very hard and will quickly ruin a file.
        Thanks
        Helpful 7 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Lay Gold Leaf onto Any Surface
      How to
      Make Chainmail
      How to
      Quickly Turn Copper Darker
      How to
      Make an EMP Generator from a Disposable Camera
      10 Tips to Drill through Metal
      How to
      Cut Aluminum
      How to
      Quickly Rust Metal, Including Steel and Iron
      How to
      Age Brass for a Worn, Antique Look
      How to
      Connect Metal Without Soldering
      How to
      Change the Color of Metal with Paint, Heat, or Dyeing
      How to
      Bend Sheet Metal
      How to
      Blue Steel
      Easiest and Fastest Ways to Cut Copper Pipe to the Right Length
      How to
      Make Copper Look Aged
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about working with metal, check out our in-depth interview with Christopher Thomas .

      References

      1. ↑ https://www.mscdirect.com/basicsof/hand-files
      2. ↑ https://www.mscdirect.com/basicsof/hand-files
      3. ↑ https://www.mscdirect.com/basicsof/hand-files
      4. ↑ https://toolmakingart.com/2012/07/04/rust-removal/
      5. ↑ http://www.frets.com/FretsPages/Luthier/TipsTricks/FileClean/fileclean.html
      6. ↑ http://www.accuratebuilding.com/publications/recipes/tools/how_to_file_surface_edges.pdf
      7. ↑ https://www.ccohs.ca/oshanswers/safety_haz/hand_tools/vises.html
      8. ↑ http://www.accuratebuilding.com/publications/recipes/tools/how_to_file_surface_edges.pdf
      9. ↑ http://www.accuratebuilding.com/publications/recipes/tools/how_to_file_surface_edges.pdf
      1. ↑ http://www.popularmechanics.com/home/tools/how-to/a18522/how-to-use-a-file-the-correct-way/

      About This Article

      Article Summary X

      To file metal, start by choosing a file that is the right size, shape, and coarseness for your project. Next, clean the file with a stiff wire brush and use a vise or clamp to secure your project to your work surface. Then, file by applying pressure on the forward stroke before lifting the file away on the return stroke. Avoid using a back and forth motion, which can damage your file and your project. Also, remember to use straight filing for detail work and cross filing to remove heavy material. For tips on draw filing, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 348,481 times.

      Reader Success Stories

      • Nelda Murray

        Oct 9, 2019

        "Definitely helps me figure out what to do with all these files! I need handles..."
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement