Download Article
Locate a MAC address using OS, Windows, or Linux
Download Article
- OS X |
- Microsoft Windows |
- Linux |
- Linux arp-scan Utility |
- Video |
- Tips |
- Warnings
Finding the media access control (MAC) address, or hardware address, for the hosts on your network is a fairly simple process. It involves the use of the address resolution protocol (ARP), which converts Internet protocol (IP) addresses into the MAC address. All the common operating systems (OS) include the "arp" command that allows for easy discovery of the MAC addresses on the network. In this article, you'll learn about finding the MAC address on OS X, Microsoft Windows, and Linux OS.
Discovering a MAC Address on Network
On OS X, Windows, and Linux, open the terminal app, command prompt, or console window. Enter “sudo arp -a” (OS, Linux) or “arp -a” (Windows) to find all discovered MAC addresses. Then, ping the target IP by typing “ping 192.168.1.112”.
Steps
-
Open the Terminal app. The quickest way to find all discovered MAC addresses is done listing all the current entries in the ARP table. [1] X Research source
- sudo arp -a
-
Ping the target IP. If the IP and MAC address pair aren't listed in the output, then you must first "ping" the target IP.
- ping 192.168.1.112
Advertisement -
If the ping returns a positive response, then you can review the ARP information using either of the following methods.Either of these commands will provide the IP to MAC address mapping.
- sudo arp 192.168.1.112
- sudo arp -a
Advertisement
-
Open a command prompt. The quickest way to find all discovered MAC addresses is done listing all the current entries in the ARP table. [2] X Research source
- arp -a
-
Ping the target IP. If the IP and MAC address pair aren't listed in the output, then you must first "ping" the target IP.
- ping 192.168.1.112
-
If the ping returns a positive response, then you can review the ARP information using either of the following methods.Either of these commands will provide the IP-to-MAC address mapping.
- arp 192.168.1.112
- arp -a
Advertisement
-
Open a Console window. The quickest way to find all discovered MAC addresses is done listing all the current entries in the ARP table.
- sudo arp -a
-
Ping the target IP. If the IP and MAC address pair aren't listed in the output, then you must first "ping" the target IP.
- ping 192.168.1.112
-
If the ping returns a positive response, then you can review the ARP information using either of the following methods.Either of these commands will provide the IP-to-MAC address mapping.
- sudo arp 192.168.1.112
- sudo arp -a
Advertisement
-
1On the Linux OS you can avoid pinging individual hosts and then querying for the MAC address by using the arp-scan utility. The arp-scan utility makes it very easy to discover all the IP-to-MAC address pairs on a subnet.
-
Open a Console window.
-
Issue a command. The arp-scan utility has many available options, but the simplest method is to issue the command with a subnet parameter. This will build an arp table of all network accessible hosts and print the output to the console.
- sudo arp-scan 192.168.1.0/24
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- When on Linux, use the arp-scan utility to quickly scan an entire subnet for IP-to-MAC pairs.Thanks
- If no results are returned for your ARP request, try pinging the host and then submitting the ARP request.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Remember that ARP is not a routed protocol, so it will only provide you the IP-to-MAC address information for your local network.Thanks
Advertisement
References
About This Article
Thanks to all authors for creating a page that has been read 212,437 times.
Advertisement
