Download Article
Download Article
Wind deflectors allow you to open your car window during a stormy day without getting rain on your upholstery. They can also reduce the noise made when you roll your window down by deflecting the wind away from your window. Because wind deflectors are easy to install, fitting them to your car does not require a trip to the mechanic or any special tools. As long as you clean the channels beforehand and insert the deflectors carefully, they should fit comfortably in your window frame.
Steps
-
Buy wind deflectors made for your car model. Wind deflectors are specially designed for different car models. Make sure that the wind deflectors you buy are suitable for your car. If you purchase the wrong kind, you will not be able to achieve a perfect fit.
- You can find the car model information on the wind deflector's packaging. If you're not sure what kind to buy, ask a salesperson for advice.
-
Roll your window down. To fit the wind deflector in, you will need to roll your window at least halfway down. If your window does not roll down to the bottom, you can still fit your deflector in but may not be able to clean your window as thoroughly. [1] X Research sourceAdvertisement
-
Clean the window frame and channel. Spray a window cleaner or mild solvent over the tops and sides of the window and wipe it off with a paper towel or dry cloth. Rub off any dirt, dust, or debris in the window frame so your wind deflector will fit in securely. [2] X Research source
- If you are installing an adhesive wind deflector, clean off the window's trim (the painted door frame to the top and sides of the window) with the cleaner and dry cloth.
-
Use a damp cloth or screwdriver to scrape dirt away from the bottom of the frame. Pull your cloth through the slot and pick out any large pieces of debris that might be stuck in the slot. If you cannot pull out the debris using the cloth, pick it out with a screwdriver instead. [3] X Research source
-
Let the window frame dry before fitting in the deflector. If you install the deflector while the window frame is still wet, your deflector may not attach as tightly. Give the windows time to air dry or wipe the frame and slot down with a dry towel before you prepare your wind deflector. [4] X Research source
Advertisement
-
Place the wind deflector into the top window channel. Lift the deflector into the top corners of the channel first and push it into place. Press up on the middle and sides of the wind deflector to keep it securely fitted into the frame. [5] X Research source
-
Attach any window clips, if applicable. Some wind deflectors come with clips to adhere the wind deflector's edges in place. If your wind deflector comes with any clips, push them up between the deflector and the window to fasten it in place. [6] X Research source
- Your wind deflector's instructions should indicate where, specifically, to put the clips in.
-
Check the window for obstructions. After you have put the deflector in place, roll the window up to check that it still works properly. If your window cannot roll up, try adjusting the wind deflector to shift it out of the way. [7] X Research source
- This is especially important for electric windows, which may refuse to roll up if they sense an obstruction in the way.
- If you adjust the wind deflector, be careful not to force it in any position, as you may accidentally damage it.
-
Keep your window rolled up for 24 hours. Roll the window back up after you've finished adjusting its alignment and let it sit for at least 24 hours. This will give the wind deflector enough time to mold into the window so it will stay in place.
-
Use a maintenance spray on the window if it works slowly. If your wind deflector seems to slow your windows down, use maintenance spray around the window channels and slot to keep it from catching on the frame while rolling up or down. [8] X Research source
- You can purchase maintenance spray online or at most auto shops.
Advertisement
-
Peel off a small section of the double-sided tape liner from both sides. Several inches or centimeters is enough to test the deflector's fit. Place the wind deflector along the top of the window trim to test its approximate fit. [9] X Research source
- Do not remove all of the double-sided tape until you've aligned the wind deflector.
-
Adjust the wind deflector's alignment. Line the wind deflector up with the top of the window trim as closely as possible. When you've achieved an even fit, apply pressure to the peeled ends of the adhesive to secure the wind deflector in place. [10] X Research source
- If the wind deflector does not align with the top of the window, it may be the wrong size.
-
Remove the remainder of the adhesive tape. Pull on the adhesive tape's end strips until you have entirely removed them from the wind deflector. Apply pressure to the wind deflector as you peel off the tape to stick it firmly on your car. [11] X Research source
-
Test the wind deflector for adherence. After you've bonded the wind deflector to your car, try to wiggle the deflector up and down. If the deflector has adhered properly, it shouldn't move. Apply more pressure to loose areas or adjust the wind deflector's positioning if it does move.
Advertisement
Community Q&A
Search
-
QuestionDoes it damage the windows?Community AnswerIf you use the adhesive wind deflector, it will not damage the window as it is stuck on the outside. If you use the other kind, it might damage it a little.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Wear gloves while cleaning your car and handling the wind deflectors to avoid smudging as you work.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Paper towel
- Microfiber cloth
- Maintenance spray
- Window clips (optional)
References
- ↑ https://www.youtube.com/watch?v=dnSRJ_d_dw0&feature=youtu.be&t=57
- ↑ https://www.youtube.com/watch?v=FnpGIh0nEqs&feature=youtu.be&t=49
- ↑ https://www.youtube.com/watch?v=lPtLGgijgTI&feature=youtu.be&t=17
- ↑ https://www.youtube.com/watch?v=LXyiH0Ng5CU&feature=youtu.be&t=63
- ↑ https://www.youtube.com/watch?v=FnpGIh0nEqs&feature=youtu.be&t=93
- ↑ https://www.youtube.com/watch?v=dnSRJ_d_dw0&feature=youtu.be&t=212
- ↑ https://www.youtube.com/watch?v=xDU5CwrUVCM&feature=youtu.be&t=265
- ↑ https://www.youtube.com/watch?v=lPtLGgijgTI&feature=youtu.be&t=58
- ↑ https://www.carid.com/articles/how-to-install-rain-guards-in-channel-and-stick-on.html
About This Article
Thanks to all authors for creating a page that has been read 78,742 times.
Reader Success Stories
- "The wind guards I purchased for my wife's Subaru did not come with instructions to install. Your instructions are very helpful for installing them." ..." more
Advertisement
87%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"The wind guards I purchased for my wife's Subaru did not come with instructions to install. Your instructions are very helpful for installing them."
..."
more
