How to Repair a Flat Tire

Download Article

Find the leak and patch the hole to get back on the road

Co-authored by Howard Fleischmann

Last Updated: March 11, 2024 References

Download Article

Finding the Leak

|

Using Puncture Sealants

|

Using a Tire Plug Kit

|

Q&A

|

Tips

Having a flat tire is one of the major inconveniences of driving. When a good spare is unavailable, you either have to call a tow truck or fix the tire yourself. Luckily, the process of fixing it yourself is relatively straightforward and requires only a few tools.

Things You Should Know

Find the leak by listening and feeling for escaping air around the tire. Or, coat the tire in soapy water and look for the spot that bubbles intensely.
Turn the tire so that the leak points upward and remove any foreign objects with pliers. Attach the sealant can to the tire via the air nozzle.
Press the button on the sealant can to release its contents. Detach the can, then drive your car for 5 minutes to distribute the sealant in the tire.

Get Car Support Solve Any Problem

Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!

*

Method 1

Method 1 of 3:

Finding the Leak

Download Article

In order to find a leak the tire must be properly pressurized. You should inflate your tire with air until it reaches the appropriate pressure (measured in psi) specified in your vehicle's service manual.
Before moving on to more time consuming techniques, you should take a moment to look at your tire. If you notice any holes, cuts, or objects protruding from tire then you have found your leak.

Advertisement
Even if you aren't able to see the problem right away you might be able to hear it. A hissing sound is a clear sign that air is leaking from your tire, and can help you locate the leak.
If you run your hands over the tire carefully you may feel the leak even if you can't hear or see it.
If you followed the steps above and you were not able to easily find the leak don't fear. Spraying the tire with a little soapy water or window cleaner may help. If you see bubbling at any place on the surface of the tire then you have found your leak. ^{[1]
X
Research source}
You can use a spray bottle to spray the tire, or if a spray bottle isn't available you can just pour the mixture over the tire.
As air escapes the tire and encounters the soapy water mixture it will form soap bubbles. If you notice the soapy water bubbling at any particular place on the tire, you have found your leak.

Method 2

Method 2 of 3:

Fixing the Leak with Tire Puncture Sealants

Download Article

1
Read the directions on the can of sealant you have brought. Various manufacturers have slightly different steps and required amounts you should put in. However, there are some steps that are generally the same.
- Keep in mind that newer tire models usually have tire pressure monitoring systems. Using tire puncture sealants can sometimes damage or destroy these systems. ^{[2]
  X
  Expert Source
  
  Howard Fleischmann
  Automotive Tire & Repair Specialist
  
  Expert Interview. 4 June 2021.}
This may or may not be necessary depending on why your tire is flat.
Unscrew your valve cap. You will put the sealant in the same way that you would inflate your tire with air.
Once you have it on securely, press a button to release the contents.
You need to drive your car to rotate the tire. This allows the sealant to be distributed evenly inside the tire and prevents it from forming a heavy lump inside the tire.
Tire sealants are great to bail you out in a major crisis. Unfortunately they are only good for 3 days or 100 miles, whichever comes first. You should replace your tire before then to avoid possible problems.

Method 3

Method 3 of 3:

Using a Tire Plug Kit

Download Article

It is important to remember to loosen, or break, the lug nuts before you jack up the vehicle. This way the weight of the vehicle is still on the wheels and it prevents them from spinning dangerously while you turn the lugs.
2
Jack up the car. Once the lugs have been loosened, it will be necessary to jack the car up so that the wheels can be removed. ^{[3]
X
Expert Source

Howard Fleischmann
Automotive Tire & Repair Specialist

Expert Interview. 4 June 2021.} As mentioned above, this should be done on level concrete or some other hard, level surface. Some important things to remember when jacking up the car are:
- Your service manual will recommend jacking points
- The most common way to elevate the car is a floor jack, or trolley jack. If you are unsure how to use one visit Lift a Car Using a Trolley Jack .
- You should use jack stands to stabilize the car. A good tutorial on jack stands can be found at Use Jack Stands .
- If you have access to a hydraulic lift it will save you time.
At this point, the lugs may be loose enough to remove by hand. If not, finish removing the lugs with the lug wrench or impact wrench. Once the lugs are removed, pull the wheel off of the wheelbase. ^{[4]
X
Expert Source

Howard Fleischmann
Automotive Tire & Repair Specialist

Expert Interview. 4 June 2021.} If you are uncomfortable removing a wheel, read about how to Remove Lug Nuts and Tires .
4
Pull out any protruding object with a pair of pliers. It is also good practice to mark the spot with chalk or markers.
- When there's no protruding item, follow the above steps for locating a leak.
This is done by inserting the tool in and out of the hole quickly. This also roughens the area so the fix will hold.
Both of these pieces can be found in your tire repair kit. This is sometimes difficult and requires squeezing down one end to make it fit though the hole first. ^{[5]
X
Research source}
There should be roughly ½” of plug protruding from the tire. ^{[6]
X
Research source} If your kit came with an adhesive, such as rubber cement or glue, apply it to the plug before inserting. This will lubricate the plug, making it easier to push in. The adhesive will also promote a better seal.
Before doing this, you should let any adhesives used dry for at least one minute.
Use a tire gauge to check that the tire is at the manufacturer recommended air pressure.
This will allow you to check the seal to make sure it is holding. If it isn't holding, add a little cement or retry using another plug.
You should slide the wheel back onto the wheelbase and thread the lug nuts on tight enough to hold wheel in place while the car is still on the jackstands.
Use the floor jack to lift the vehicle off of the jackstands. Remove the jackstands and lower the vehicle with the floor jack.
Once the weight is back on the wheels, use a lug wrench or impact wrench to tighten the lugs to the proper torque specifications in your service manual. Be sure to tighten lugs in a star pattern.
14
Replace the tire. While a plug can provide more stability than tire sealants, it is not a forever solution. It is suggested that you replace the tire within the next 20,000 miles. ^{[7]
X
Research source}
- For a fix that's more long-term, have a professional mechanic plug and repair your tire. ^{[8]
  X
  Expert Source
  
  Howard Fleischmann
  Automotive Tire & Repair Specialist
  
  Expert Interview. 4 June 2021.}

Community Q&A

Search

Add New Question

Question

Should I pull out the nail on the drive to the mechanics?

Community Answer

No, absolutely not! Removing the nail or screw allows the air pressure inside the tire to escape much faster, and you will end up driving on a flat tire. Do not remove the puncture item until you are at the place of repair.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 10 Helpful 26
Question

Where can I get air when I'm at home?

Community Answer

Ideally, use an air compressor. Otherwise, you can use a bicycle tire pump, but it will take longer.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 6 Helpful 17
Question

When should I replace my tires?

Community Answer

When there are visual signs of wear and tear, such as cracking on the tires or if the tires are releasing a lot of air.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 9

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Only attempt to plug or seal a tire that has a puncture no more than 1/4-inch (6.350 mm) wide. Gashes and wide or deep punctures cannot be repaired this way.

Thanks
Helpful 0 Not Helpful 2
Both methods described are only temporary solutions until you can get the tire inspected and properly patched by a professional shop. If you subscribe to a roadside assistance service, you may not even have to pay extra for someone to come out to your location and fix the tire for you, or at least help install a "donut" spare tire (if you have one) so that you can get it to a service center.

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Using commercially available sealants can void warranties on your tire. Check your warranty before using one of these products.

Thanks
Helpful 2 Not Helpful 0
Do not continue driving with a flat tire. This can cause irreversible damage to the tire's rubber and steel threads.

Thanks
Helpful 0 Not Helpful 0

Things You'll Need

Commercial tire sealant
Tire plug kit
Jack
Jackstands
Tire wrench
Sponge or rag
Pliers
Chalk or marker
Water
Soap

You Might Also Like

[1]

[2]

Expert Source

Howard Fleischmann
Automotive Tire & Repair Specialist

[3]

[4]

[5]

[6]

[7]

[8]

Log in

How to Repair a Flat Tire

Things You Should Know

Steps

Get Car Support Solve Any Problem

Finding the Leak

Fixing the Leak with Tire Puncture Sealants

Using a Tire Plug Kit

Community Q&A

Video

Tips

Warnings

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories