Download Article
Simple lubrication tips to loosen a sticky lock in minutes
Download Article
Dust, dirt, grime, and other buildup can accumulate on a lock over time. This accumulation can result in a "sticky" lock, which means it becomes difficult to insert and pull out your key. Sticky locks can be frustrating, and it's likely the last thing you want to deal with when you're coming home after a long day. In this guide, Expert Home Specialist Ryaan Tuttle recommends inexpensive products that can lubricate and move your lock smoothly again in just a few minutes!
Easy Ways to Lubricate a Sticky Lock
Use powdered graphite, Teflon, or PTFE-based lubricants like WD-40 Dry Lube to clear away any gunk or debris stuck in the lock. Slide your key in and out of the lock to spread the lubricant around the lock. Reapply lubricate once every season to keep your locks gunk-free.
Steps
Section 1 of 4:
Lubricating the Lock Using Powdered Graphite
Download Article
-
Cut the plastic tip off the end of a tube of powdered graphite . If your lock is so sticky that you can barely get your key in and out, you may need something as tough as powdered graphite, which comes in a tube. Snip the plastic off the end of the nozzle with a sharp pair of scissors so the graphite can flow freely. [1] X Research source
- Powdered graphite is a dry lubricant that encourages smooth movement between two metal surfaces without attracting grime.
- The graphite particles form a fine layer on the surface of the metal, lubricating and "brushing" away dust and dirt.
- In a pinch, you can rub a graphite pencil against the surface of the lock.
-
Place the end of the nozzle up to the opening of the lock. Depending on the bottle size, you can fit the nozzle part of the way inside the opening. If not, hold it flush to the lock. It should still be able to penetrate deep enough to lubricate the locking mechanism. [2] X Research source
- Hold the tube level so that graphite doesn't escape around the opening.
Advertisement -
Squeeze the bottle or tube gently to release a few puffs of graphite. Try not to use an excessive amount—graphite is a potent substance, so a little goes a long way. Wait 1-2 minutes so the graphite can start working its magic on the lock. [3] X Research source
- If possible, wear a pair of disposable gloves to avoid getting graphite all over your hands.
-
Test the lock by inserting and removing your key once or twice. It should be easy to get the key in and out of the lock now. Turn the key in both directions to see how fluidly it moves. [4] X Research source
- Sliding your key in and out of the lock also helps spread the graphite inside the lock.
-
Repeat the application as needed. If the lock still feels sticky, hit it again with a few more blasts of powdered graphite. Test the lock after each application. Once the graphite has spread, it will clear away the gunk hindering the lock's movement, leaving you with a fully functioning, hassle-free door.
- Try squeezing a little graphite onto the door's latch for especially stubborn locks. This is the part of the locking mechanism that moves in and out of the door frame when you turn the knob. Lubricating the latch can help ease the keying action. [5] X Research source
- If you still need help, call a professional locksmith to look at your locks. Sometimes, the problem is with the pins inside the lock slipping down and loosening, which can't be fixed with lubricant.
Advertisement
Section 2 of 4:
Download Article
-
Attach the applicator straw to the nozzle of a can of WD-40 Dry Lube . Expert Home Specialist Ryaan Tuttle suggests using the thin, flexible red applicator straw that fits right over the nozzle where the oil comes out. The straw will allow you to penetrate deep into the lock, lubricating it more effectively. [6] X Expert Source Ryaan Tuttle
Home Improvement Specialist Expert Interview. 13 January 2021.- While WD-40 is a common household item that can be used on nearly everything, it's not recommended for long-term use. It's effective for a quick fix, but dust and debris can still stick to the surface. [7] X Research source
- WD-40 Dry Lube PTFE Spray is dust and dirt-resistant and has long-lasting corrosion protection.
- Avoid using any lubricants that aren't appropriate for home improvement uses, such as cooking, botanical, or sewing machine oil. Most oils will attract dust that forms new layers on the locking mechanism, worsening the problem. [8] X Research source
-
Insert the straw into the lock opening and spray in short bursts. Guide the straw as far as possible to ensure you're hitting every part of the locking mechanism that may be sticking with the WD-40 Dry Lube. Tuttle says to press the button on the rear of the canister to release the lubricant. Don't be afraid to use a liberal amount if you need to. Keep spraying until oil overflows from the lock. [9] X Expert Source Ryaan Tuttle
Home Improvement Specialist Expert Interview. 13 January 2021.- Wear gloves while handling lubricants to prevent a slippery mess.
-
Wait 1-2 minutes and test the lock with your key. Give the lubricant a little time to break down the dust and dirt accumulated inside the lock. Then, slide your key in and out of the lock a few times to see how smoothly it moves. [10] X Research source
- If the lock still sticks, you may need to try a more heavy-duty lubricant like powdered graphite.
Advertisement
Section 4 of 4:
Preventing Sticky Locks
Download Article
-
Regularly clean your locks with multi-use WD-40 . If you're stuck in a pinch and have nothing but oil or regular WD-40, that's okay! These are still effective methods for a quick sticky lock fix. Afterward, apply a generous amount of multi-use WD-40 to dry the lock and remove lingering lubricants. [12] X Research source
- Regular use can limit the amount of dust and dirt accumulating over time, making sticky locks less likely.
-
Lubricate locks at least once every three months. How often you should lubricate your locks depends on the product you're using. However, to prevent your locks from sticking, touch them up once every season, especially for Telfon-based lubricants. However, if you're using WD-40, you may have to go in once a month since it dries out quickly. [13] X Research source
- With stronger lubricants, like graphite, you may only need to lubricate your locks once a year.
-
Update your locks when necessary. If your lock is constantly getting stuck or sticky, it may be time to get a replacement before you break a key. You can get the same model or an updated keypad, so you no longer have to deal with keys; the choice is yours. Contact your local locksmith for advice and further assistance, or take matters into your own hands and DIY your new lockset!
Advertisement
Expert Q&A
Search
-
QuestionHow do I get a key out of a sticky lock?Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.Try to wiggle it back and forth, then grab the key with a vise grip tool and pull.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Always wash your hands if your exposed skin comes into contact with WD-40 or powdered graphite.Thanks
- Keep WD-40 and powdered graphite stored somewhere accessible in your home so you'll have them on hand when your locks start acting up.Thanks
- The problem may only sometimes be with the lock. Inspect your keys for signs of damage and overuse. Have new ones cut if they're worn down. Dull key teeth can have difficulty displacing the pins inside a lock.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Graphite can have a mild corrosive effect on galvanized aluminum. Double-check to ensure no part of your lock or door frame is aluminum before using powdered graphite.Thanks
- Take caution when using knives or scissors to prevent injury.Thanks
- Use powdered graphite sparingly . Graphite tends to be overused and will eventually start to cake onto a lock, making it harder to operate. After a few years, liquid graphite gets gummy, and if you use WD-40 on it, it loosens up the liquid graphite.Thanks
- Be careful not to inhale graphite particles. This could lead to illness or infection.Thanks
- Working with powdered graphite can get messy. Keep this in mind when using it to bust a sticky lock.Thanks
Advertisement
References
- ↑ https://rentpost.com/resources/article/how-to-fix-a-sticky-lock/
- ↑ https://youtu.be/T8KvwfeUB6I?t=4
- ↑ https://youtu.be/kfFzOYQRCko?t=46
- ↑ https://rentpost.com/resources/article/how-to-fix-a-sticky-lock/
- ↑ https://rentpost.com/resources/article/how-to-fix-a-sticky-lock/
- ↑ Ryaan Tuttle. Home Improvement Specialist. Expert Interview. 13 January 2021.
- ↑ https://www.keytek.co.uk/security-tips/is-wd40-good-for-door-locks/
- ↑ http://www.dummies.com/home-garden/home-improvement/doors/how-to-lubricate-a-door-lock/
- ↑ Ryaan Tuttle. Home Improvement Specialist. Expert Interview. 13 January 2021.
- ↑ http://www.dummies.com/home-garden/home-improvement/doors/how-to-lubricate-a-door-lock/
- ↑ https://www.ptlockandsafe.co.uk/blog/how-to-lubricate-a-cylinder-lock
- ↑ https://www.elocal.com/resources/home-improvement/locksmith/faq/wd-40-locks/
- ↑ https://www.squirelocks.co.uk/blog/general-security/lock-maintenance-how-to-lubricate-locks/
About This Article
Article Summary
X
To fix a sticky lock, go purchase a can of WD-40 from your local hardware store. To use it, you may need to attach the applicator straw to the nozzle of the can, if it's not already attached. Put on some gloves before you start spraying it because WD-40 can make a mess. Then insert the straw on the can into the lock and spray in a liberal amount of WD-40. Let it sit for a few minutes and then test your lock with a key to see if it worked. For instructions from our Contractor reviewer on how to use powdered graphite to fix a lock, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 451,931 times.
Reader Success Stories
- "I thought I needed to call a key and lock service! Instead I read this, looked in my garage and found WD-40, followed the instructions and the problem was solved! Thank you!" ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I thought I needed to call a key and lock service! Instead I read this, looked in my garage and found WD-40, followed the instructions and the problem was solved! Thank you!"
..."
more
"Aside from the picture showing 'granite' rather than 'graphite' I figured I'd go buy some graphite from the shop rather than using WD40, which may attract dust. Thank you."
..."
more
"Never heard of powdered graphite, but it works! Good tip!"
"It was very informative. I'm glad I'm not a criminal!"
"My lock kept getting stuck and was quite irritating."
