How to Flush Power Steering Fluid

PDF download Download Article
PDF download Download Article

Flushing power steering fluid refers to the process of circulating the fluid in an automobile's steering system in order to assure proper operation. At slow speeds, power steering allows you to easily turn the big, heavy wheels on your car — as long as you have enough steering fluid. The procedure is not difficult, and with a little knowledge, even someone with a minimal amount of experience in mechanics can perform this task on his or her own.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*
Method 1
Method 1 of 3:

Knowing When to Flush Power Steering

PDF download Download Article
  1. Your power steering system is actually remarkable at staying clean. That said, over time natural wear and tear will cause bits of rubber, plastic, and dirt to enter the fluid, and this can cause problems to the entire system if the fluid is not flushed. Each car has its own suggested interval after which you should change the fluid, so look up your model's time frame.
    • For high-end cars, you should consider replacing the fluid every 35-40 thousand miles. [1]
  2. Your power steering fluid level should barely change from month to month. If it is changing, then you likely have a leak and should bring your car to an auto shop as soon as possible.
    • Your reservoir usually has a labeled cap or a picture of a steering wheel. If you are having trouble locating this semi-transparent plastic tank, check your owner's manual.
    Advertisement
  3. Open the reservoir and use a flashlight to peer down into the fluid. The consistency, color, and smell will tell you whether or not you need to change your fluid:
    • Flush your fluid if it smells burnt, looks dark brown or black, and/or has shiny, metallic bits in it. [2]
    • Refresh your fluid if it is darkly colored, your owner's manual recommends it, and/or if you do frequent towing or high-weight driving.
    • Your fluid is fine if it is lightly colored, dark without metallic bits or chunks, or was replaced in the last two to three years. [3]
  4. This could be the sign of more serious, and expensive, power steering problems. The sooner you take care of the issue, the easier and cheaper the repair will be. [4]
    5. Advertisement
Method 2
Method 2 of 3:

Flushing your Fluid

PDF download Download Article
  1. Lift the vehicle using a jack and assure that the front wheels are raised to a sufficient height, allowing you to slide easily under the car. Since you will be rotating the steering wheel, jack stands are recommended in order to allow free movement of the tires.
  2. Some cars will not have a catch tray. If confused, check your owner's manual. If there is any fluid in this tray it likely means you have a leak and should bring the car in to a mechanic. [5]
    • Place a disposable pan right under the location of the catch tray to capture the fluid as you flush it.
    • If you are extra car savvy, make sure you disconnect the line that goes from the power steering rack to the reservoir. While not strictly necessary, this will remove more fluid and lead to a better flush. [6]
  3. There will be multiple thin (1/2-1" thick) hoses running from your power steering. With your pan ready underneath, unhook this hose and drain the old fluid.
    • Be ready for the fluid to flow as soon as you unhook it. Gloves, eye protection, and long sleeves are recommended.
    EXPERT TIP

    Hovig Manouchekian

    Auto Repair & Design Specialist
    Hovig Manouchekian is an Auto Repair and Design Specialist and the Manager of Funk Brothers Auto, a family-owned business operated since 1925. With over 30 years of experience in the automotive industry, Hovig specializes in the process of auto repair and maintenance. He is also very knowledgeable in common automotive issues and needs including engine repair, battery replacement, and windshield accessory and maintenance. Hovig's knowledge and hard work have contributed to Funk Brothers Auto winning Angie's List Super Service Award for five consecutive years.
    Hovig Manouchekian
    Auto Repair & Design Specialist

    Top up your power steering fluid to ensure a smooth ride. Contaminated power steering fluid is a common cause of a stiff steering wheel, as are low levels of fluid. Fix contaminated fluid with a system flush. If the fluid level is low, there may be a leak in the system. Keep the reservoir filled with fresh fluid.

  4. Unscrew the cap to the power steering reservoir and add roughly 1/2 of the manufacturer's recommended amount of power steering fluid. In order to fully flush the system, you'll need to remove the air bubbles and push out the rest of the fluid in the hoses. Fill it roughly halfway before moving on. [7]
  5. It is often easiest to have a friend turn the car on while you pour. You want to keep your eyes on the draining fluid as well as the current level of the reservoir. When the draining fluid is clearly new fluid, shut the car off.
    • Have your friend turn the wheel back and forth as you pour. This will help remove air from the lines.
    • The fluid will likely bubble as you fill it. This is good, as it represents the air being flushed from the system.
  6. Power steering fluid is not thick, so it should not be hard to close the line up once you're done working. Once the fluid is flushed, shut the car off and reattach everything how you found it.
  7. Once you've got the air out and the line closed, fill up the reservoir to the recommended level.
  8. Listen for a buzzing sound which indicates that there is air trapped in the system. Continue to turn the steering wheel until the fluid is properly circulated throughout the system, releasing any remaining air. [8]
  9. More likely than not, your fluid level will seem to drop after you test the steering wheel. This is because fluid is being drawn out of the reservoir and into the lines. Top off the reservoir with more power steering fluid to finish the job. [9]
  10. Turn the car on and turn the steering wheel back and forth. Ensure that the wheels can turn like normal. If they don't, bleed the system again and refill it.
    11. Advertisement
Method 3
Method 3 of 3:

Refreshing Your Fluid

PDF download Download Article
  1. Many owner's manuals never even mention steering fluid, and despite the urging of some mechanics, there is growing disagreement that a full flush is really needed for most cars. [10] If the fluid doesn't smell burnt and there are no metallic bits in the fluid, you can get by with a simpler "flush."
    • If your fluid is dark or you are losing sleep worrying about your car, this simple procedure will refresh your fluid for the foreseeable future. [11]
  2. This is usually labeled with a steering wheel icon on the cap.
  3. Note the color and consistency of the fluid. If it smells burnt or has bits of metal in it, you'll need to do a full flush of the system. Note the current level of the fluid.
  4. This will take some time, and you will not get everything, but this is a simple and easy way to get old fluid out without a complicated flush. [12]
  5. This simple procedure will protect your car, cheaply, and is just as effective a method as a full flush if you have no other problems. The power steering system is, relatively speaking, rather clean and simple. Unlike other fluids, like oil, the power steering system doesn't even need a filter. This quick "refresher" is likely all you'll need to do to keep your wheels turning easily.
    • Many cars don't even recommend changing this fluid — you'll be ahead of the game if you even do this.
  6. Drive the car around, recirculating the fluid, and repeat a few weeks later if you want a full "flush." This won't get everything out, but more than enough to keep your car running happily. [13]
    7. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Read Video Transcript

      Tips

      • During the air purging process, it is imperative that you don't overfill the reservoir. Filling it to the midpoint between the minimum and maximum levels is ideal.
        Thanks
        Helpful 37 Not Helpful 27
      • It will generally take six separate cycles to complete a power steering fluid flush.
        Thanks
        Helpful 27 Not Helpful 23
      • For safety purposes, be sure to wear suitable clothing and protective eyewear when performing this operation.
        Thanks
        Helpful 11 Not Helpful 7
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Refill Brake Fluid
      How to
      Change the Oil in Your Car
      How to
      Pump Your Own Gas
      How to
      Add Oil to Your Car
      How to
      Add Windshield Washer Fluid to Your Vehicle
      How to
      Add Coolant to Your Car
      What Happens if You Put Too Much Oil in a Car? Your Questions Answered
      How to
      Drain Your Car's Fuel Tank
      How to
      Check Clutch Fluid Level
      How to
      Fill & Use a 2 Types of Gas Cans
      How to
      Change Transmission Fluid
      How to
      Get Gasoline Smell Out of Clothes
      How to
      Cap a Gas Line
      How to
      Make Ethanol Fuel at Home
      Advertisement

      References

      1. ↑ https://www.dvatp.com/bmw/power_steering_flush
      2. ↑ https://gobdp.com/blog/need-power-steering-flush/
      3. ↑ https://www.cars.com/articles/do-you-need-to-change-your-cars-power-steering-fluid-1420663066270/
      4. ↑ https://www.cartalk.com/content/car-talk-service-advice-power-steering-fluid
      5. ↑ https://www.cartalk.com/content/car-talk-service-advice-power-steering-fluid
      6. ↑ https://gobdp.com/blog/need-power-steering-flush/
      7. ↑ https://gobdp.com/blog/need-power-steering-flush/
      8. ↑ https://www.dvatp.com/bmw/power_steering_flush
      9. ↑ https://mobiloil.com/en/article/car-maintenance/car-maintenance-archive/how-to-flush-and-bleed-power-steering-systems
      1. ↑ https://freerepublic.com/focus/chat/3074898/posts
      2. ↑ https://www.cars.com/articles/do-you-need-to-change-your-cars-power-steering-fluid-1420663066270/
      3. ↑ https://www.cars.com/articles/do-you-need-to-change-your-cars-power-steering-fluid-1420663066270/
      4. ↑ https://www.cartalk.com/content/car-talk-service-advice-power-steering-fluid

      About This Article

      Article Summary X

      Before you flush your power steering fluid, put on long sleeves, gloves, and safety goggles to protect your eyes and skin. Jack the front of your vehicle up far enough so that you can easily slide underneath. For your safety, use jack stands as well as a jack to keep the car stable. Locate and remove the catch tray under your vehicle’s power steering system, if it has one. Consult your manual if you’re not sure where to find the tray. Unhook the low-pressure hose from the steering pump at its lowest point and allow the power steering fluid to drain out into the tray. Next, unscrew the cap on the power steering reservoir and pour in about half of the manufacturer’s recommended amount of power steering fluid. This will help push out air bubbles as well as any old fluid that’s still in the system. Turn your car on and keep adding new fluid so that the reservoir stays about half full the whole time the old fluid is draining out. Once you notice clear new fluid draining out of the power steering system, turn your car off. Reattach the power steering hose, then top off the reservoir with fresh fluid and put the cap back on. Start your car again and turn the steering wheel back and forth for about 5 minutes to help distribute the fluid through the system. After you’ve done this, you may need to add a little more power steering fluid to the reservoir to bring it up to the fill line. Turn your car on again and test to make sure that the wheels are turning properly. If not, drain the system again and refill it with fresh fluid. For tips on refreshing a reservoir when it's low on power steering fluid, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 561,192 times.

      Reader Success Stories

      • Glenn Wells

        Sep 15, 2016

        "Thanks for the info on how to change my power steering fluid. It worked a lot better than before. I have been ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement