Download Article
Download Article
Tar is an especially durable and sticky material, so if you accidentally track some onto your carpet, it’s understandable to worry. Luckily, there are several ways to remove tar even from a delicate and absorbent material like carpet. The key is to clean the stain immediately after it happens, blotting and scraping up any excess tar that you can. After that, clean the dark stain using one or multiple powerful cleaning agents that help to dissolve and lift the tar from the fibers of the carpet.
How do you get tar out of your carpet?
Dip a cloth in water and dry cleaning solvent. Blot the tar carefully to remove the stain.
Steps
-
Blot the stain immediately with a paper towel. After the tar stain forms, blot it immediately with a paper towel. Instead of rubbing, pat at the stain using gentle dabbing motions to lift the tar. [1] X Research source- Be sure to blot only the stained area to avoid spreading the tar to clean areas of carpet.
- Make sure to start blotting at the stain as soon as it forms. Keep blotting until no more tar is lifted.
-
Freeze the tar using an ice cube. A powerful way to remove fresh tar is to freeze and harden it so that it’s easy to scrape off. To freeze the tar, hold an ice cube against the stained area of carpet for at least a minute. [2] X Research source- After about a minute, touch the tar and feel whether it has hardened. If it has not, hold the ice cube against the stain until the tar has fully hardened.
Advertisement -
Scrape up any hardened tar with a butter knife or spoon. After you have finished freezing the tar, use a butter knife or spoon to scrape up any tar that may have hardened into the fibers of the carpet. Because the tar has frozen, the tar should come off in crumbles. [3] X Research source- Try not to be too rough as you scrape, as this can damage the carpet further.
- Scraping and blotting should have reduced a significant amount of the stain, but it’s likely that you will need to use a cleaning solvent to get rid of the entire stain.
Advertisement
-
Wet a cloth with water and dry cleaning solvent. Even if blotting and scraping removed most of the chunks of tar in your carpet, your carpet still may be stained a dark black from the pigment of the tar. To begin to target this pigmentation using dry cleaning solvent, pour water over a cloth rag, then add a few teaspoons of dry cleaning solvent to one area of the wetted rag. [4] X Research source- Dry cleaning solvent is a powerful agent that is designed to remove especially stubborn stains from a variety of surfaces, including carpet.
-
Blot the stain with the dry cleaning solvent. After you have applied the water and dry cleaning solvent to the cloth, dab gently at the stain. Be sure to dab the tar with the area of cloth on which you poured the dry cleaning solution.- Just like when you dabbed with the dry cloth, try to pat in soft sponging motions, as opposed to rubbing at the stain.
- If the dry cleaning solvent worked to completely remove the stain, pour a few drops of water onto the area you were working on, then dab using a clean cloth. This will absorb any of the dry cleaning solvent and leave you with a clean carpet.
-
Create a dishwashing detergent solution. If the dry cleaning solvent didn’t work to remove the tar, you can try to clean the stain using a solution of dishwashing detergent and water. To make this solution, pour one teaspoon (4.9 ml) of water into a small bowl along with a teaspoon (4.9 ml) of liquid dishwashing detergent that doesn’t contain lanolin or bleach. [5] X Research source -
Blot the stain using the dishwashing detergent solution. Dip a clean cloth into the dishwashing detergent solution, then blot the stain as you did before, working in small, dabbing motions to lift the stain. [6] X Research source- If you succeed in eliminating the stain, wet a clean cloth with water, then blot at the area of carpet you were working on to completely remove any traces of cleaner.
-
Dab the stain with rubbing alcohol. Rubbing alcohol is a very potent cleaner, so it is best left for especially stubborn stains. To use rubbing alcohol to clean the tar stain, dip a clean cloth in rubbing alcohol, then blot at the stain. [7] X Research source- Be sure not to oversaturate the cloth in rubbing alcohol, or else it may soak through the carpet. When rubbing alcohol bleeds through carpet backing, it can damage the latex bond of the carpet.
- Whether or not the rubbing alcohol worked to remove the stain, clean the area of carpet you are working on by pouring a few drops of water onto a clean cloth, then dabbing at the carpet to remove any traces of rubbing alcohol.
Advertisement
-
Use a commercial tar remover. There are several products on the market designed to lift and remove tar. Before using one of these products, first spot-test it on an inconspicuous area of carpet. If it doesn’t discolor or stain the carpet, follow the instructions on the bottle and use it on the tar stain.- Most tar removers are in the form of a thick liquid that you will apply to the stained area, then dab with a clean cloth.
-
Spray WD-40 on the carpet. Most people don’t realize that WD-40 can act as a powerful stain remover! To use WD-40 on the stain, spray it directly over the stained area. Let the WD-40 sit for around ten minutes so it can penetrate the stained fibers of the carpet, then use a clean cloth to blot at the area using gentle sponging motions. Blot until you stop lifting any stain or until the entire stain is lifted. [8] X Research source- After using the WD-40, make a mixture of one part dish soap and one part water, then dip a clean cloth in the soap solution and dab at the area to remove the WD-40. [9] X Research source
- WD-40 generally does not stain, but if you are worried about it further staining your carpet, spray test an inconspicuous area of carpet with a small amount of WD-40, then let it sit for about five minutes. If you do not notice any discoloration, it is safe to use.
-
Spray brake cleaner on the stain. Brake cleaner is another product that is not designed as a stain remover, but can do a great job breaking down and lifting tar stains. Spot the test brake cleaner before using, then spray it directly over the tar stain. Use a clean cloth to blot and lift any remnants of the stain.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Get the help of a professional cleaner if you still are struggling to remove the stain. [10] X Expert Source Haim Shemesh
Carpet & Rug Cleaning Specialist Expert Interview. 12 May 2020.Thanks - Always blot as much tar as you can with a clean cloth before moving on to other methods. If you don’t get rid of the excess tar at the surface of the stain, you could spread it around to other parts of the carpet.Thanks
- Because tar is such a sticky substance, you may have to try multiple methods of cleaning the stain before it is completely eliminated.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Don’t use any cleaning products that contain bleach or lanolin, as they can stain the carpet further.Thanks
- Try to open the windows and doors while cleaning so that the room is well-ventilated.Thanks
- Remember to blot, not rub, or else you could work the stain deeper into the carpet.Thanks
Advertisement
Things You’ll Need
- Ice cube
- Clean, dry cloths
- Dishwashing Liquid
- Brake cleaner
- WD-40
- Commercial tar remover
- Dry cleaning solvent
- Rubbing alcohol
References
- ↑ https://housecleaningcentral.com/cleaning-tips/floors/carpet-tar-stain-removal/
- ↑ https://housecleaningcentral.com/cleaning-tips/floors/carpet-tar-stain-removal/
- ↑ https://housecleaningcentral.com/cleaning-tips/floors/carpet-tar-stain-removal/
- ↑ https://housecleaningcentral.com/cleaning-tips/floors/carpet-tar-stain-removal/
- ↑ http://cleaning.lovetoknow.com/house-cleaning-tips/carpet-tar-stain-removal
- ↑ http://cleaning.lovetoknow.com/house-cleaning-tips/carpet-tar-stain-removal
- ↑ http://cleaning.lovetoknow.com/house-cleaning-tips/carpet-tar-stain-removal
- ↑ http://cleaning.tips.net/T006564_Removing_Roofing_Tar_from_Carpet.html
- ↑ http://cleaning.tips.net/T006564_Removing_Roofing_Tar_from_Carpet.html
- ↑ Haim Shemesh. Carpet & Rug Cleaning Specialist. Expert Interview. 12 May 2020.
About This Article
Article Summary
X
If you’re trying to get tar out of carpet, start by blotting it with a paper towel. Then hold an ice cube against the stain for a minute. When the tar feels hard, use a butter knife or a spoon to scrape up as much as you can. To remove what’s left, you can try wetting a cloth with water and dry cleaning solvent and gently dabbing the stain. If that doesn’t work, try mixing a little dishwashing detergent with some water and blotting the stain. Got a really stubborn stain? You may need to try a commercial product, like WD-40. If you want to learn how to use rubbing alcohol to get rid of the stain, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 189,177 times.
Reader Success Stories
- "Thank you! I tracked tar onto my carpet - 8 spots! I blotted with a dry paper towel. Then did the 1-1 ratio of water and dishwashing detergent (I used Dawn). Then rinsed using my steam cleaner. Took an hour, but all the tar is out." ..." more
Advertisement
"Thank you! I tracked tar onto my carpet - 8 spots! I blotted with a dry paper towel. Then did the 1-1 ratio of water and dishwashing detergent (I used Dawn). Then rinsed using my steam cleaner. Took an hour, but all the tar is out."
..."
more
"The WD 40 worked wonders getting the tar stain out of my carpet."
"I was amazed didn't even think of using WD-40, thank you!"
"Brilliant, it worked for removing coffee from my carpet!"
"The WD-40 worked like a miracle!"
