PDF download Download Article PDF download Download Article

Border terriers are small, but they’re working dogs and should look understated and unfussy. While their characteristic shaggy appearance makes grooming fairly simple, they do have unique needs. Brush your dog’s dense double coat daily, but bathe it infrequently so the coat retains its ability to repel dirt and water. Instead of trimming your border terrier with electric clippers, preserve its coat's texture and color by plucking out long, dead hair every 5 to 6 months.

Method 1
Method 1 of 3:

Developing a Cleaning Routine

PDF download Download Article
  1. Regular brushing removes dead hair and helps keep your dog’s coat clean. Gently run the slicker brush through the coat in the direction that it grows. If you encounter a mat , spray it with conditioner or mat spray, hold the base of the fur, and work at the mat with a metal comb. [1]
    • Use smooth, slow motions, and be sure not to brush hard or scrape your dog’s skin.
    • A slicker brush is covered with fine wire pins. It’s designed to remove dead hair, mats, and debris from fur, and is the best grooming tool for double-coated dogs. You can buy one online or at your local pet supply store.
    • If you can't brush daily, at least try to do it once a week. [2]
  2. While you brush, check your dog’s belly, bottom, and genital area. Remove any soil from these areas with a damp cloth or a wet wipe.
    • If you use wet wipes, make sure they’re safe to use on dogs. Choose baby wipes or cleansing wipes labeled for dogs instead of harsher wipes meant for household cleaning.
    Advertisement
  3. When you brush its coat, look for buildup in the corners of its eyes, in its eyebrows, and inside of its ears. Check its whiskers, or the fur around its muzzle, for dirt or food residue. If necessary, remove any buildup from these areas with a damp cloth or a wet wipe.
    • Wipe gently toward the corners of its eyes. Avoid coming into contact with the eye itself.
    • Lift an ear and wipe any buildup away from the hairs and the skin inside. Dry the insides of the ears after wiping them with the damp cloth.
  4. Clean your dog’s teeth every day. Use a small pet toothbrush and toothpaste labeled for dogs. Gently lift your dog’s lip and brush its teeth with circular motions. Have patience if it resists, and reassure it with lots of praise. [3]
    • Be sure the toothpaste is marked safe for pets. Your dog will get sick if it swallows toothpaste made for humans.
    • If your dog resists having its teeth brushed, try using a flavored toothpaste. Chicken flavored toothpaste usually does the trick.
  5. When your border terrier’s coat gets wet, you should only need to dry it off with a clean towel. Since its coat is waterproof, you probably won’t need to blow dry it. After towel drying it, run the slicker brush through its coat. [4]
    • If you do need to blow dry your border terrier, use a low, cool or warm setting. [5] Hold the blow dryer at least 1 foot (30 cm) away from your dog, and avoid blowing directly in its face. [6]
  6. Bathe your border terrier only if it’s absolutely necessary. If your dog is filthy, rinse its fur with warm water in a sink or bathtub. Use dog shampoo labelled for terriers or wiry-coated dogs only if warm water isn’t effective. [7] After giving it a bath, dry it with a towel, blow dry it if you want to speed the drying process, and then brush it.
    • A border terrier’s coarse outer coat is waterproof and keeps dirt away from the undercoat and skin. Bathing removes the coat’s oil and softens its texture. Without its oil and wiry texture, the coat loses its repellent properties.
  7. Advertisement
Method 2
Method 2 of 3:

Maintaining Its Paws and Nails

PDF download Download Article
  1. Hold and stroke your dog’s paws daily, and reward calm behavior with praise and treats. Frequent handling and rewards will help it form a positive association with having its paws touched. [8]
    • Most dogs don’t like having their paws handled. Trimming its nails and the fur around its paw pads is delicate, and your dog needs to remain still during handling to avoid accidental injuries.
  2. If you live in a cold climate, add winter care to your daily grooming routine. After each walk, wipe your dog’s paws with a warm, damp cloth or wet wipe, and towel dry its body if it gets wet. [9]
    • Massaging petroleum jelly into your dog’s paw pads can help protect them from snow, salt, and chemicals.
    • Snow, salt, and de-icing chemicals can be irritating or poisonous. When you wipe your dog’s paws after walks, check the pads and lower legs for chafing and redness.
    • If you see signs of irritation, apply witch hazel or soak your dog’s paws in 1 gallon (3.8 L) of warm water and 1 2 to 1 cup (120 to 240 mL) of Epsom salt for at least 10 minutes.
  3. Clip its nails 1 to 2 times per month. Trim your dog’s nails regularly and in small amounts to avoid nicking a quick, or a nail’s sensitive root. [10] As a rule of thumb, trim your dog's nails every 2 to 3 weeks, or whenever you can hear them click when it walks on hard surfaces. [11]
  4. Grasp a paw firmly but gently, and use curved clippers designed for dogs to trim the end of a nail. Clip only the end of the nail, and avoid cutting into the curve. Doing so would risk nicking the quick. [12]
    • If your dog resists, aim to trim only 1 to 2 nails at a time, then give it a break.
    • If you cut the quick , stop the bleeding by gently packing it with baking soda or by holding a bar of soap to the paw for 3 to 4 minutes. Do your best to reassure your dog with calm praise. Bandage the paw when the bleeding stops, and call the vet if you can't control the bleeding.
  5. Use blunt safety scissors to trim the hair that grows between its paw pads and around its nails. Hold the scissors flat against the paw pads instead of pointing them toward the foot. Cut only around the bottom of your dog’s feet; the hair at the top can be stripped by hand. [13]
    • Remove enough hair so that none covers the paw pads. You should be able to see the pads clearly.
    • Trim your border terrier’s feet every 5 to 6 months, or when its hair begins to cover the pads.
    • Excess hair around the paw pads collects grime and makes it harder for your dog to walk without slipping.
  6. Advertisement
Method 3
Method 3 of 3:

Stripping Your Border Terrier’s Coat

PDF download Download Article
  1. Unlike humans and most other dogs, border terriers’ hair stops growing and dies after 5 to 6 months. The old, dead coat should then be hand-plucked so a new coat can grow in its place. Your dog is ready to be stripped when its coat is so long that it forms a part down the center of its back. [14]
    • Stripping is the process of pulling out dead hair by hand. It’s a common grooming practice for wiry, double-coated terriers. Since the hair is dead, it’s easy to pluck out without causing any pain.
    • With practice, you might be able to strip the entire coat in around 30 to 60 minutes. However, it will most likely take several 30 to 60 minute sessions if you’re a beginner.
    • You should not cut a border terrier’s coat with electric clippers. Clipping ruins the coat’s texture and color, and causes it to lose its ability to repel dirt and water.
  2. If you’re confident that your dog won’t try to jump away, place it on a table that’s high enough for you to work comfortably. It’s helpful to have your dog stand on a non-slip mat. If its paw pads are covered with overgrown hair, it might have trouble standing on a smooth tabletop without slipping. [15]
    • Some owners simply strip their border terrier while cuddling on the sofa. This is a good option if you can’t get your dog to stand on a table for 30 minutes. However, you’ll have an easier time seeing its natural lines and stripping it evenly if it’s standing. [16]
    • You’ll probably need to work in several short sessions, especially the first few times you strip the coat. If it’s not used to being stripped, your dog will probably only tolerate 10 or 15 minute sessions.
  3. Use one hand to grasp the skin in the area that you’re plucking. Gently pull the skin flat so it’s tight and won’t move when you pluck the hair. With your other hand, test the coat by pinching at a few hairs with your thumb and index finger. [17]
    • You shouldn't encounter much resistance when you pinch and tug. If dead hair doesn't come out easily, the coat isn't ready to be stripped. If necessary, try again in 1 to 2 weeks.
  4. After testing the coat, pluck a pinch of hair at a time with firm, quick motions. Pluck the hair out in the direction that the coat grows. In general, the coat grows toward the tail. Hair that covers the limbs grows toward the feet. [18]
    • Your dog shouldn't jerk or yelp as if it felt pain. If the hair doesn't come out easily or if plucking seems to hurt your dog, the coat isn't ready to be stripped.
    • It might be helpful to look at a visual reference while you strip. Search online or in a dog breed guidebook for pictures of freshly stripped border terriers.
  5. The easiest place to start is behind your dog’s neck and shoulders. Stand behind it, grasp a patch of skin, and pluck of pinch of old hair toward yourself (toward the dog’s tail). Continue stripping its back in small, even sections. [19]
    • Your dog might be confused or alarmed the first time you strip its coat. Reassure it with generous praise and have its favorite treats handy.
    • Try to pluck for at least 10 to 15 minutes, but don’t force your dog if gets stressed. Take a break, and make another attempt when your dog is mellow.
  6. After stripping your dog's back, move on to the sides of it body, stomach, and rear end. Remember to hold the skin flat, and pluck a few hairs at a time in small sections. These areas are more sensitive than the back, so take breaks whenever your dog gets antsy. [20]
    • While it might be a bit tedious, stripping is relatively simple. Just be patient, and work little by little over the course of a few days if you or your dog get antsy.
    • When you’re finished stripping the body, you should see your dog’s undercoat, and its appearance should be neat and tidy instead of shaggy and unkempt.
  7. Pluck the hair on the front and back side of each limb. Hold the skin flat and pull small pinches of hair downward, or toward the feet. Strip the top of each foot, but leave the hair that grows over the paw pads. [21]
    • Use scissors to trim the hair that grows around the paw pads.
  8. Pluck even smaller pinches from the head and face, as these areas require more attention to detail. Start by removing dead hair from the top of the head, down between the eyes, and around the edges of the eyes. Then carefully pluck tiny pinches of long, dead hair on the outside of its ears. [22]
    • Pluck hair on the ears toward the points of the ears.
    • When stripping the head and face, it’s wise to have a visual reference on hand. For helpful images, search online for “border terrier head study.”
  9. Border terriers shouldn’t have elaborate facial hair like other terrier breeds. However, you should leave short whiskers, or hair that grows around its muzzle. Pinch long, scraggly hairs to tidy the muzzle, then continue plucking along its jawline. [23]
    • Don’t leave a beard or long hair below the jawline.
    • Step back often to make sure you’re stripping the face and muzzle evenly. Whiskers don’t grow as fast as the rest of the coat, so any mistakes will last for months.
  10. One way to taper the tail is strip it over the course of 3 to 4 weeks. When you strip the rest of your dog’s body, pluck the bottom third of the tail, or the base. Let the coat grow for 1 to 2 weeks, then strip the tail’s middle third. Finally, strip the final third, or the tip, 1 to 2 weeks after stripping the middle section. [24]
    • The base, middle, and tip will then grow at different rates, and the tail will come to a point like a carrot.
    • The breed standard specifies a tapered tail. If you’re not worried about meeting the standard, just shape the tail into a point as best you can. Leave some hair at the base and gradually pluck more hair as you get to the tip.
    • Pinch smaller amounts of fur around your dog’s rear end and tail, as these are sensitive areas.
  11. Use blunt safety scissors to carefully trim around the inner thighs, lower abdomen, and genitals. Then hold the scissors flat against the bottom of each foot and trim the hair that grows around the paw pads. [25]
    • The area between your dog’s hind legs is sensitive, and hair there doesn’t grow as long as the rest of its body.
    • Just use scissors on the thin hair that covers the sensitive areas; the upper abdomen and chest should be plucked by hand.
  12. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How can I calm my dog down when they are nervous to take a bath?
    Lancy Woo
    Certified Pet Groomer
    Lancy Woo is a Certified Pet Groomer and the Owner of VIP Grooming, a pet grooming salon based in San Francisco, California. VIP Grooming has served San Francisco for over 35 years. Lancy received her pet grooming certification from the WWPSA (Western Word Pet Supply Association). VIP Grooming has been voted "Best in the Bay" in 2007, 2010, 2011, 2014, 2017, 2018, and 2019 and won Bay Woof’s "Beast of Bay" in 2014. In 2018, Lancy's work contributed to VIP Grooming's acceptance onto San Francisco's Office of Economic and Workforce Development's Legacy Business Registry.
    Certified Pet Groomer
    Expert Answer
    Some people have noticed if they sit on the floor with their dog for a little while and wait for the dog to approach them, it gives the dog time to get comfortable. It also gives you time to read your dog. Are they sound sensitive? Fear based or overwhelmed? Knowing these things about your dog can help you avoid perpetuating fear for your dog.
Ask a Question
      Advertisement

      Tips

      • If you’re not confident about stripping your border terrier’s coat, ask a local breeder or border terrier club for a referral to a good groomer. [26]
      • Make sure any groomer you use is knowledgeable about stripping a border terrier, and tell them that you do not want your dog clipped. [27]
      • Grooming and stripping your border terrier might seem like a lot of work, but you don’t need to worry about making it look pristine. While some terrier cuts require precise lines and elaborate furnishings, border terriers should look shaggy instead of over-groomed.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      • Slicker brush
      • Metal comb
      • Conditioner or mat spray
      • Damp cloth or wet wipes
      • Small pet toothbrush
      • Dog toothpaste
      • Dog shampoo for wiry coats (optional)
      • Dog nail clippers
      • Blunt safety scissors

      About This Article

      Thanks to all authors for creating a page that has been read 51,876 times.

      Did this article help you?

      Advertisement