How to Hang Cabinet Doors

PDF download Download Article
PDF download Download Article

Learning how to hang cabinet doors is a great way to update your home and give your kitchen a facelift. Whether you opt for brand new cabinets or refinishing your existing cabinets, you can save a lot of money by installing them yourself. You can sand and paint or stain old doors. Hanging the doors involves attaching the hinges to the door, determining how the door fits on the cabinet, and aligning the door evenly on the cabinet. For a whole row of cabinets, you can level each one with the first door you hang.

Part 1
Part 1 of 4:

Attaching the Hinges

PDF download Download Article
  1. If you took the hinges off of the door at the start, then you should be able to find the original screw holes. Line the hinges up with those holes and use a hand drive screwdriver to attach them. New doors may or may not have pre-drilled holes for the hinges, so install them 1 1 ⁄ 2 –2 in (3.8–5.1 cm) from the top and the bottom of the door to ensure they support the door properly. [1]
    • When working with new doors that have never had hinges attached, carefully use a power drill to drill holes for the screws. Make the holes very shallow so you don't drill through the front of the door.
    • Look for a mark of some kind, or read the instructions that came with the cabinets, to determine where the hinges need to go.
    • If you are working with hinges that stay together as one piece, attach them to the door before you attach them to the cabinet. Some hinges will come into two pieces and you'll attach one to the door and one to the cabinet itself.
  2. There are at least a few types of cabinet doors, which include overlay doors and partial inset doors. Most doors should overlap the opening by 3 ⁄ 4 inch (1.9 cm), but the type of door and the type of hinges determines the best way to attach it. [2]
    • If the inside of the door is flat, it is probably an overlay door. If there is a ridge on the inside of the door that would rest inside the cabinet, it is a partial inset door. You can hold the door up against the cabinet to see how it fits.
    • For a partial inset door, move it around to see it if fits tightly in the cabinet opening or if there is room to move it around. This will affect how you position it when you hang it.
    • The type of door you have will determine where the hinges go, to an extent. Some hinges will attach to the face of the cabinet, while others will attach inside the cabinet.
    Advertisement
  3. This will help you determine where the hinges attach to the cabinet. If you find holes on the outside or on the inside, that will tell you where the hinges go. If you don't find holes, it's good to consult the instructions if you have them. You may need to drill holes.
    • If you can't find holes anywhere, and you don't have instructions, you'll have to do a little bit of guesswork to determine exactly where the hinges attach.
    • With doors that inset, there is a pretty small margin of error for where you could place the hinges. With overlay doors, your goal is to center the door on the cabinet opening.
    4. Advertisement
Part 2
Part 2 of 4:

Installing the Door

PDF download Download Article
  1. Have someone help you hang the door. If you attach the hinges to the inside of the cabinet, the door will have to be open, so having someone hold it while you insert the screws will help a lot. [3]
    • This is the part where you have to move the door and use your own judgment to align the door straight. Using a small level can help you align the door.
    • It can be helpful to put 1 screw in each hinge and see if the door hangs straight and swings open smoothly. If not, you can remove the screw from one of the hinges, adjust the door slightly, and then replace the screw.
    • When you feel that the door is aligned, insert the rest of the screws into the hinges. Test the door by opening and closing it a few times to see if it moves smoothly.
  2. Some cabinets include a latch which keeps the cabinet door shut. This might be a magnetic piece, a roller, or some other type of latch. These are usually attached to the top corner of the door on the opposite side from the hinges. The second part of the latch should be attached to the corresponding spot on the cabinet. [4]
    • This is an optional step because not all cabinets need a latch to stay closed. Even if your cabinets did not come with latches, you can buy some at a hardware store.
    • The holes on the latch pieces where the screws go are often slotted so you can move the screws around as needed. You have the ability to adjust the placement so the latch pieces connect.
  3. Some cabinets do not have knobs. The type of handle may determine how you attach it to the door. For upper cabinets, be sure to attach the handle near the bottom of the door. For lower cabinets, the handle should go near the top. [5]
    • Cabinets which feature a handle or knob should have pre-drilled holes which show you where the handle goes. You'll most likely attach the screws on the inside of the door.
    • Use a laser level to make a straight line across the cabinets as a guide for where to drill the holes for your handles.
    4. Advertisement
Part 3
Part 3 of 4:

Aligning the Other Doors

PDF download Download Article
  1. Open the door that you already hung up. Stretch a piece of tape from the hinged corner of the door across the lower front edge of the rest of the cabinets. You want roughly half of the tape to be covered by the door and half of the tape to be visible.
    • Make this tape line as level as you can. You can use a level to guide as you stretch it out.
  2. Holding the level against the bottom of the first cabinet door, draw a line under the opening for the second door. This line will give you the proper angle to match the second door up to the first door. [6]
  3. Follow all of the steps from the previous section to hang the second door. Align the bottom of the door with the mark you made along the tape guideline. Once the door is up, place the level along the bottom of both doors to ensure they are aligned. [7]
  4. As you move down the line of cabinets, you can draw a level guideline for each cabinet door. You can also check to make sure that each door you hang stays level with the one before it.
    5. Advertisement
Part 4
Part 4 of 4:

Sanding and Painting the Doors

PDF download Download Article
  1. Use drop cloths to reduce the mess. If the weather is nice and warm, you can work outside, but if you work inside it is best to cover things well. If you are doing a lot of doors, you may want to do a few at a time to reduce the clutter.
    • If you have doors containing glass, it's a good idea to tape some paper over the glass to protect it from stains. You'll also want to be careful as you move these doors around so you don't break the glass. If your doors have a divider, you can usually fit a piece of paper between the divider and glass so you can easily paint the entire area.
  2. You will be sanding and painting the doors, and this is much easier to do with only the wooden door. Use a screwdriver, electric or hand drive, and take off all the hinges and knobs or handles. Set these aside for when you put them back on. [8]
    • These are most likely interchangeable between doors, but you can mark them in some way if you want to put them back with the same door they were on.
  3. Whenever you refinish wood, it is a good idea to give it a thorough sanding first. You can use a few coarseness levels to get the job done. Using a sanding block for all of the flat areas will save you time. Clean the doors with denatured alcohol before you prime them. [9]
    • Sanding serves two main purposes: it removes old paint or stain and roughs the surface up for new paint or stain. Don't go overboard and take a half inch off the doors, but make sure that all of the old paint or stain is gone.
    • When you finish, the doors should have a smooth, dull look to them.
  4. If you want to paint your cabinet doors, it is always good to give them a coat of primer. It helps the paint stick. If you stain them, you don't need any other product, but you may want to put two or three coats on for a full coverage.
    • Be sure to cover any surface that you paint over.
    • Allow the cabinet doors to dry before you hang them up.
    • If you painted the doors, you may want to use a nail or other thin instrument to gently poke all of the screw holes to clean the paint out so it doesn't dry and clog the holes.
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Does it matter which side of a hinge goes on door?
    Eric Shipe
    Home Improvement Specialist
    Eric Shipe is a Kitchen and Bath Designer and the Owner of Bath + Kitchen based in Washington DC. Eric and his team specialize in cabinetry, design, and remodels. They serve homeowners, interior designers, architects, and contractors with a refined process, creative ideas, 4K photo-realistic renderings, and 360 Panoramic views. Bath + Kitchen was featured in Best of Houzz 2017-2020. Eric holds a BA in Economics and Business Administration from Ursinus College.
    Eric Shipe
    Home Improvement Specialist
    Expert Answer
    Install your hinges on the opposite side of the door pulls. For instance, if your door pull is on the right, your hinge should be on the left.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 2
  • Question
    Where do you install cabinet door hinges?
    Eric Shipe
    Home Improvement Specialist
    Eric Shipe is a Kitchen and Bath Designer and the Owner of Bath + Kitchen based in Washington DC. Eric and his team specialize in cabinetry, design, and remodels. They serve homeowners, interior designers, architects, and contractors with a refined process, creative ideas, 4K photo-realistic renderings, and 360 Panoramic views. Bath + Kitchen was featured in Best of Houzz 2017-2020. Eric holds a BA in Economics and Business Administration from Ursinus College.
    Eric Shipe
    Home Improvement Specialist
    Expert Answer
    Place hinges 1.5 to 2 inches (3.8 to 5.1 cm) from the top and bottom edge of each door—you'll need a ruler or straightedge to measure accurately. Decide on the measurement that you'll use and stick to it for all kitchen doors. For greater precision, use the same ruler for all your measurements.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    Where should inlay hinges be placed?
    Eric Shipe
    Home Improvement Specialist
    Eric Shipe is a Kitchen and Bath Designer and the Owner of Bath + Kitchen based in Washington DC. Eric and his team specialize in cabinetry, design, and remodels. They serve homeowners, interior designers, architects, and contractors with a refined process, creative ideas, 4K photo-realistic renderings, and 360 Panoramic views. Bath + Kitchen was featured in Best of Houzz 2017-2020. Eric holds a BA in Economics and Business Administration from Ursinus College.
    Eric Shipe
    Home Improvement Specialist
    Expert Answer
    Place inlay hinges flush with the outer edge of the cabinet door. These hinges are concealed and require extra accuracy during installation.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 1
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Make fine adjustments after you have installed all the doors so you can take a step back and look at them all.
        Thanks
        Helpful 1 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Cabinets and doors
      • Hinges, knobs, latches
      • Screwdriver, screws
      • Drill (optional)
      • Painter's tape
      • Level

      You Might Also Like

      How to
      Pick Locks On Doorknobs: Knob Types & Lockpicking Tutorials
      How to
      Adjust a uPVC Window
      How to
      Install a Door Knob
      How to
      Remove a Door Handle
      5 Ways to Fix a Broken Door Frame
      How to
      Adjust a Standard Door Closer
      How to
      Frame a Door Opening
      How to
      Rethread a Roller Blind Cord
      How to
      Replace a Door Handle
      Easy Fixes for Ring Doorbell Flashing Blue
      How to
      Reset a Ring Doorbell
      How to
      Seal a Door
      How to
      Remove a Ring Doorbell Cover
      How to
      Stop Condensation on Windows
      Advertisement

      References

      1. ↑ Eric Shipe. Home Improvement Specialist. Expert Interview. 11 June 2021.
      2. ↑ Eric Shipe. Home Improvement Specialist. Expert Interview. 11 June 2021.
      3. ↑ Eric Shipe. Home Improvement Specialist. Expert Interview. 11 June 2021.
      4. ↑ Eric Shipe. Home Improvement Specialist. Expert Interview. 11 June 2021.
      5. ↑ Eric Shipe. Home Improvement Specialist. Expert Interview. 11 June 2021.
      6. ↑ http://www.johnsonlevel.com/News/SpiritLevelInformation
      7. ↑ Eric Shipe. Home Improvement Specialist. Expert Interview. 11 June 2021.
      8. ↑ http://www.artofmanliness.com/2010/02/18/toolmanship-how-to-use-a-screwdriver/
      9. ↑ http://www.familyhandyman.com/woodworking/how-to-sand-woodwork-by-hand/view-all

      About This Article

      Article Summary X

      In order to hang cabinet doors properly so they’re evenly and securely attached, you’ll need to attach hinges to the doors before installing them onto the cabinet itself. If there aren't any, you'll need to pre-drill holes for the hinges. Same thing for the cabinet. If there aren’t pre-drilled holes, use your drill to make them where you’ll attach the hinges. Screw the hinges onto the door, then attach the other side of the hinges to the cabinet by screwing them in place. Once the door is attached, you’ll want to install handles or knobs to the outside of the door to finish the project. To learn how to make sure the doors are aligned, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 156,656 times.

      Did this article help you?

      Advertisement