How to Hang MDF Board

MDF board, short for medium-density fiberboard, is a type of composite wood material made from sawdust and glue. It’s a popular product for artwork because its smooth surface doesn't show a wood grain. However, it’s also very heavy, which makes it hard to hang on a wall. Luckily, there are specialized brackets that can support the weight of whatever type of MDF board you’re trying to hang.

Part 1
Part 1 of 2:

Attaching a Bracket to the Board

PDF download Download Article
  1. Search online or at the hardware store for brackets strong enough to support MDF. There are some products designed to hold the extra weight of an MDF board. Since MDF is a popular medium for artists, arts and crafts stores may carry suitable brackets as well. [1]
    • Some brackets might say if they're meant specifically for MDF, but it's more important to check that any brackets you use can support the weight of the board. MDF boards can be over 50 pounds (23 kg). Any product that can hold enough weight will work.
    • Check the board's weight by weighing yourself, then weighing yourself again holding the board. Subtract the first number from the second number to get the board's weight.
    • These sets should come with 2 brackets, 1 for the board and 1 for the wall, and any screws or other hardware you need. If they don't, use wood screws 1 ⁄ 2  in (1.3 cm) long.
  2. Use a ruler or tape measure and measure the width of the board. Divide that measurement in half to get the center point. Put a mark at that point 1 inch (2.5 cm) from the top of the board. [2]
    • If the board is 10 inches (25 cm) wide, 10 divided in half is 5. Put a mark at the 5 in (13 cm) point.
    Advertisement
  3. MDF can split if you drive screws into it directly. Start by using a sharp drill bit 85-90% as wide as the screw root diameter. Hold the screw up to the bit to confirm the sizing. Drill slowly until you’ve reached the distance that the screw will go. Make as many holes as you need to attach the bracket. [3]
    • If you're using 1 ⁄ 2  in (1.3 cm) screws, then drill pilot holes that deep. Try holding the screw against the drill bit for a reference on how far you should drill.
    • Don’t drill holes closer than 1 inch (2.5 cm) from the edge of the board. MDF edges are weak and the board could splinter or break under the weight. The board will be strong enough in any spots that are at least 1 inch (2.5 cm) from the edge.
    • You should always pre-drill any kind of material before drilling it, whether it's MDF, wood, or plastic.
  4. Hold the bracket against the board and line it up with the pilot holes. Insert a screw into each hole slowly. [4]
    5. Advertisement
Part 2
Part 2 of 2:

Mounting the Board

PDF download Download Article
  1. Find a stud where you want the top of the board to sit. Find the general area that you want the board to hang in. Use a stud finder to locate the nearest stud in the area. Then find the height along that stud where you want to place the bracket. Remember that wherever you place the bracket is where the top of the board will sit. [5]
    • Don’t try to hang MDF without finding a stud. It’s too heavy for regular drywall to hold. [6]
    • You can also find a stud by tapping on the wall. A hollow sound means that there is no stud in that spot, and a solid sound means you found one.
    • If you're mounting the board on brick or concrete, don't worry about finding a stud. The masonry will support the board's weight.
  2. Hold the bracket against the stud at the correct height. Make sure the bracket is straight. Then, drill screws through the support holes to attach the bracket to the wall. [7]
    • If you're attaching the bracket to brick or concrete, use a masonry drill bit and screws so they don't break. Drill pilot holes first, then hold up the bracket and insert the screws. [8]
  3. Before mounting the MDF, hold a level up against the bracket. If the bracket is level, then go on hanging the board. If not, remove the screws and reattach the bracket so it’s level. [9]
    • Removing screws is easy. Just run the drill in reverse.
    • You can fill old drill holes with spackle and repaint them, or just let the board cover them.
  4. Lift the MDF board and bring it up to the wall bracket. Slide the brackets together to mount the board onto the wall. [10]
    • Since the MDF board is so heavy, you might need someone to help you lift it.
    • Let go of the board slowly so you know that the bracket is supporting it.
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you attach MDF board to a wall?
    Ryaan Tuttle
    Home Improvement Specialist
    Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with wikiHow and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses.
    Ryaan Tuttle
    Home Improvement Specialist
    Expert Answer
    Put 100% clear silicone or liquid nail on the back of it and glue it to the wall. Then, shoot it with some finished nails until it dries.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Things You’ll Need

      • MDF wall brackets
      • Drill
      • Screws
      • Level
      • Pencil
      • Tape measure

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Get Suction Cups to Stick
      How to
      Hang Sawtooth Picture Hangers
      14 Ways to Hang or Stick Things on Walls Without Damage
      How to
      Hang Decorations from a Ceiling
      How to
      Hang the American Flag on a Wall
      How to
      Hang a Whiteboard
      How to
      Hang an American Flag Vertically
      How to
      Hang Things on Plaster Walls
      How to
      Hang a Mirror with Wire
      The Best Way to Hang a Dartboard
      How to
      Hang a Heavy Mirror
      The Best Way to Hang a Frameless Mirror With a Flat Back
      How to
      Hang Heavy Objects from the Ceiling
      How to
      Hang a Poster Without a Frame
      Advertisement

      Expert Interview

      Thanks for reading our article! If you'd like to learn more about working on your home, check out our in-depth interview with Ryaan Tuttle .

      References

      1. ↑ https://youtu.be/ADq37Qd_msU?t=5
      2. ↑ https://youtu.be/ADq37Qd_msU?t=35
      3. ↑ https://www.woodworkingnetwork.com/best-practices-guide/gluing-laminating-veneering/why-cant-i-screw-mdf
      4. ↑ https://youtu.be/ADq37Qd_msU?t=35
      5. ↑ https://youtu.be/ADq37Qd_msU?t=66
      6. ↑ https://www.woodmagazine.com/materials-guide/lumber/medium-density-fiberboard
      7. ↑ https://www.woodmagazine.com/materials-guide/lumber/medium-density-fiberboard
      8. ↑ https://todayshomeowner.com/how-to-hang-anything-on-anything/
      9. ↑ https://youtu.be/ADq37Qd_msU?t=80
      1. ↑ https://youtu.be/ADq37Qd_msU?t=80

      About This Article

      Thanks to all authors for creating a page that has been read 30,368 times.

      Did this article help you?

      Advertisement