PDF download Download Article PDF download Download Article

If you have a large canvas painting or picture that you can't wait to display, you may be wondering the best way to hang it in your home. You will need to prepare your canvas and take some measurements to figure out the best placement for your new lovely piece of art. When you’re done, your friends may think you had help hanging it from a gallery professional!

Part 1
Part 1 of 3:

Preparing Your Canvas and Gathering Supplies

PDF download Download Article
  1. Check the quality of the frame and wire on the back of the canvas by holding the canvas by the wire and lifting it up and down a few times, as if lifting weights. If you don’t hear any creaking or feel any give to the wire, it should be secure to hang. [1]
  2. If your canvas doesn’t come with hanging wire, or if you need to replace it, you can do so by attaching two D-rings with screws to both sides of the back of the canvas. With a ruler, measure 1/3-1/4 down the back of the canvas from its top and make a mark in pencil. Use the exact same measurement on both sides. Attach the D-rings with screws at the pencil marks.
    • Measure your wire across the width of the canvas and cut it so that it is 8 to 10 inches (20 to 25 cm) longer than the D-rings on both sides. You need it longer to have enough wire for twisting. Twist the wire around each D-ring and underneath itself several times so that it is knotted and secure. Clip any excess wire.
    • Use a wire gauge that can withstand the weight of your canvas. Most picture wire packaging will display how much weight the wire can hold, but ask a hardware store employee if you are unsure.
    • You can also use sawtooth hangers to hang up a large canvas. Position a sawtooth hanger about 3 inches (7.6 cm) in on either side of the top of the canvas for best results. [2]
    Advertisement
  3. Painting hooks are available at most hardware stores, and they come in 10 pounds (4.5 kg) up through 75 pounds (34 kg) varieties. You can double them up for heavier canvases. Floreat hangers are a popular brand because the nails are tempered, they go in at the appropriate 30 degree angle, and are relative easy to remove in case of error. [3]
  4. For pieces over 120 pounds (54 kg), you will want to install drywall anchors at your hanging point. The best type to use are expanding metal screws that are driven into the wall with a hammer and then screwed in to create a flange behind the drywall.
    • Follow all directions carefully on the packaging when installing drywall anchors.
    • For hanging a canvas on other wall material such as brick or concrete, you will need to use mortar or concrete anchors. [4]
  5. Advertisement
Part 2
Part 2 of 3:

Measuring the Placement for Your Canvas

PDF download Download Article
  1. This will give you the halfway height, or midpoint, of your canvas, which is important in determining how high up on the wall your canvas should go. Use a tape measure to measure the height, divide by 2, and write this number down. [5]
  2. Your ideal height is how high on the wall you want the center of your canvas to be. Most galleries place the center of a canvas at average eye level, or 58 to 60 inches (150 to 150 cm) from the floor. If you are hanging the canvas above furniture, it still looks best with the center at this height; you will just want to leave 8 to 12 inches (20 to 30 cm) between the bottom of the canvas and the top of the furniture. This works for most pieces except especially tall ones.
    • Try holding the piece with the center at 58 to 60 inches (150 to 150 cm) from the floor, and if the canvas bottom is closer than 8 inches (20 cm) to the top of your couch (or table, etc.), you may want to find a different space for the canvas.
    • For instance, if the halfway height of your canvas is 10 inches (25 cm), and your ideal height is 60 inches (150 cm) from the floor, the number you’ll write down is 70 inches (180 cm). [6]
  3. Measure the distance between the top of your canvas and the highest point in the wire on the back, if it is stretched up to its highest point. Subtract this number from the number in the previous step. This will give you the distance from the floor that you will mark your hanging point.
    • For instance, using the same size canvas as the previous example, if the distance between the top of the canvas and the highest point on the picture wire is 8 inches (20 cm), you’ll subtract 8 inches (20 cm) from 70 inches (180 cm). This point, 62 inches (160 cm) from the floor, is where your mounting hook will go into the wall. [7]
  4. Measure from the floor the number that you got in the last step. This is where your hook(s) will hang on the wall. [8]
  5. Advertisement
Part 3
Part 3 of 3:

Hanging and Leveling Your Canvas

PDF download Download Article
  1. A single hook or nail will go directly onto the point that you marked on the wall. For heavier pieces, or if you want to be extra sure that your canvas will not shift with vibrations, use two hooks spaced 4 to 5 inches (10 to 13 cm) from each other. From the central point, measure 2.5 inches (6.4 cm) to the left, and 2.5 inches (6.4 cm) to the right, and mark two new spots to hammer in two hooks.
    • To be sure that multiple hook points are the exact same height, measure the distance from them to the floor and adjust if needed before hammering the hooks into place. [9]
  2. Carefully set the wire onto the hook(s) attached to the wall. Adjust the canvas to look as straight and level as you can from where you are standing. [10]
  3. Gently place a level at the top of your canvas. If the bubble in the tube is in the center of the two lines, then your canvas is level. If the bubble slides more to one side or the other, your picture is slanted. Adjust the canvas as needed until the bubble falls in the center of the level’s tube. [11]
  4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    The canvas picture I have is 24" x 36", and has 2 black square type hangers on it that look like claws along the bottom of the square. What do I use to hang this canvas picture?
    Community Answer
    You should probably go the safe route and hang it with a nail. If there isn't something like a rope or a string attached to the top of the canvas, you can glue one on yourself so that you can hang it onto the nail.
  • Question
    What is the best way to hang a canvas?
    Drew Hawkins1
    Community Answer
    Nails and wall hooks are the easiest and most effective way to hang up a canvas. Mark the spot where you want to hang the canvas and use a hammer to install a single hook and nail at that point. For heavier pieces, or if you want to be extra sure that your canvas will not shift with vibrations, use two hooks spaced 4 to 5 inches (10 to 13 cm) from each other. From the central point, measure 2.5 inches (6.4 cm) to the left, and 2.5 inches (6.4 cm) to the right, and mark two new spots to hammer in two hooks. Then, carefully set the wire on the backside of the canvas onto the hooks and adjust it so it looks straight. If you want to be absolutely sure the canvas is straight, place a level at the top of your canvas. If the bubble in the tube is in the center of the two lines, then your canvas is level.
  • Question
    How do you hang a large canvas without nails?
    Drew Hawkins1
    Community Answer
    If the canvas isn't too heavy, you can use adhesive hooks such as Command hooks. Use a ruler or tape measure to measure and mark the locations where you want to attach your hooks. Make sure you've marked even points so your canvas won't look lopsided. Peel off the paper backing to expose the sticky adhesive underneath. Press and hold the adhesive hooks against your wall for 10 seconds so it firmly attaches. Then, gently place your canvas onto the hooks and adjust it so it looks straight.
See more answers
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      Things You’ll Need

      • 2 D-rings and 2 screws (optional)
      • Picture hanging wire and wire cutters (optional)
      • One or two pieces of picture mounting hardware (ex. Floreat hooks)
      • Tape measure or ruler
      • Pencil and paper
      • Hammer
      • Drywall, mortar, or concrete anchors (optional)
      • A level

      About This Article

      Article Summary X

      To hang a large canvas, start by checking the mounting hardware on the canvas. If your canvas doesn’t come with hardware or hanging wire, attach two D-rings with screws to both sides of the back of the canvas and add heavy-duty wire. You will also need to buy a picture mounting hook that can handle the weight of your canvas. Once you’ve determined where the hook needs to go on the wall, mark the spot with a pencil. Use a hammer to insert the hook into the wall exactly where the mark is. Then, hang the canvas on the hook and use a level to make sure the canvas is straight. To learn more about measuring placement for the mounting hook, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 180,260 times.

      Reader Success Stories

      • Meg Tsvetkova

        Jul 5, 2018

        "I used this article explicitly to learn how to hang a large framed abstract piece for the first time!"
      Share your story

      Did this article help you?

      Advertisement