PDF download Download Article
Increase PS5 storage and boost load times
PDF download Download Article

One of the advantages that PS5 has over previous consoles is its high-speed, M.2 SSD that allows faster data transfer and quicker load times. The drawback is that the PS5 only comes with a meager 825 GB of storage space, which isn't a whole lot in an era when many AAA games require 100+ GB of storage space. Luckily, you can purchase an additional SSD card to expand your PS5's storage space. This wikiHow article teaches you how to install an SSD expansion in a PS5.

Install an SSD in a PS5

  1. Remove the bottom panel of your PS5.
  2. Remove the expansion slot cover.
  3. Remove the screw holder.
  4. Insert SSD card.
  5. Reinsert screw holder at the end of the SSD.
  6. Replace the expansion cover and bottom panel.
  7. Power on your PS5 and format the SSD.
Section 1 of 2:

Installing and SSD

PDF download Download Article
  1. Not all M.2 SSD cards are compatible with PS5. When shopping for an M.2 SSD card for your PS5, try to get one that is officially endorsed by Playstation. An SSD card must meet the following requirements to be compatible with a PS5: [1]
    • Interface: PCI-Express Gen4x4 supported M.2 NVMe SSD.
    • Storage Space: Between 250 GB to 8 TB.
    • Form Factor: 2230, 2242, 2260, 2280, 22110.
    • Width: Up to 25 mm.
    • Length: 30/40/60/80/110 mm.
    • Thickness: Up to 11.25 mm (up to 8.0 mm from above the board, up to 2.45 mm from below the board).
    • Read speed: 5,500 MB/s or faster.
    • Socket type: Socket 3 (Key M).
  2. Before installing your PS5, make sure your PS5 is running the latest firmware. Some outdated versions of the PS5 firmware do not support an M.2 SSD expansion. Use the following steps to update your PS5: [2]
    • Open the Settings menu.
    • Select System .
    • Select System software .
    • Select System Software Update and Settings .
    • Select Update System Software .
    Advertisement
  3. Once your PS5 has the latest software updates, go ahead and turn it off and disconnect the power cable and the HDMI cable.
  4. Place your PS5 on a flat surface with the logo facing down and the power button facing away from you. Grab the lower-right corner of the bottom panel with your right hand and the upper-right corner with your left hand. Left with your right hand and slide to the left with your left hand. The bottom panel should slide off.
  5. The expansion slot cover is the white panel along the side just below the fan. It is held in place by a single screw. Remove the screw and then remove the expansion slot cover.
  6. Use a Philips screwdriver to remove the screw holder and the round spacer from the 110-hole at the top of the expansion slot. Set them aside for now.
  7. To do so, align the notch on the SSD card with the terminal insert. Insert the SSD card at an upward-diagonal angle. Then press the other end of the SSD down.
  8. Place the round spacer in the hole that aligns with the size of your SSD card at the end. Then screw it down using the screw holder. Make sure it is holding the SSD card down.
  9. Insert the notch for the expansion slot cover under the notch on the right side. Then screw the other end down using the screw that holds it in place.
  10. Place the white plastic panel cover just slightly away from the bottom edge and then slide it back in place. You should hear it click into place.
  11. Plug your PS5 back in using the power cable and reconnect it to your TV using an HDMI cable. Press the PS button on the controller or the power button on the front of the console to power it on.
  12. When you power your PS5 back on, you should see the formatting guide upon startup. Select Format M.2 SSD on the screen and follow the instructions to format the SSD. Once it is complete, you can use your new M.2 SSD as expanded storage for your PS5.
  13. Advertisement
Section 2 of 2:

Why Choose an M.2 SSD

PDF download Download Article
  1. Unlike older hard disk drives (HDDs) that store data on magnetic disks, solid-state drives (SSDs) store data on interconnected flash-memory chips. This means that SSDs have no moving parts, they are much more compact and much more efficient. [3]
  2. In addition to being an SSD, the PS5's internal storage uses an M.2 SSD. M.2 SSDs are a small form factor type of SSD that support non-volatile memory express (NVMe). This allows for extremely fast data transfer speeds. The reason PS5 uses an M.2 SSD instead of a more traditional hard drive is the fast transfer speeds allow for very quick loading times. [4]
  3. While the PS5 does support external hard drives, the transfer speed of an external hard drive is not fast enough to play PS5 games. You can play PS4 games off of an external hard drive. You can also use an external hard drive to store PS5 games. However, you cannot play PS5 games directly from an external hard drive. For that, you need an M.2 SSD. [5]
  4. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      About This Article

      Thanks to all authors for creating a page that has been read 782 times.

      Is this article up to date?

      Advertisement