PDF download Download Article PDF download Download Article

Applejack and apple-infused brandy are liqueurs that you can make at home with a little bit of effort and a lot of patience. Applejack is a fermented and later distilled apple cider, whereas infusing brandy with apples gives the brandy a sweet, spicy, apple pie-like taste. Though not technically applejack, the apple-infused brandy is a less time-consuming alternative. Regardless of which you are in the mood for, you can do the majority of the work to make it in an afternoon at home!

Things You Should Know

  • Heat a gallon of apple cider, adding 5 pounds of brown sugar when the temp hits 110 °F and a packet of brewer's yeast when the temp hits 115-120 °F.
  • Add the remaining 4 gallons of apple cider, seal the container's lid, and store the mixture away for 6-10 days.
  • To make apple-infused brandy, heat a mixture of apples, cinnamon, and sugar over medium heat.
  • Combine white wine, brandy, and your apple mixture in a glass container, then seal the container and store it away for 3 weeks.

Ingredients

Applejack

  • 5 gallons of fresh apple juice with no preservatives or added sugar
  • 5 pounds of brown sugar
  • A packet of brewer’s yeast
  • A sealable five-gallon container
  • A fermenting airlock
  • A large pan

Apple-Infused Brandy

  • 2 Cups red apples, peeled and chopped
  • 3 Cinnamon sticks, each 3 inches (7.62 cm) long
  • 2 Tablespoons (30 mL) of water
  • 2 1/2 Cups sugar
  • 2 Cups (480 mL) brandy
  • 3 Cups (720 mL) white wine, dry

Method 1
Method 1 of 2:

Making Applejack

PDF download Download Article
  1. Since the fermentation process for applejack requires activating the proper bacteria, you want to make sure that only those bacteria are in the mixture. Therefore, you want to sterilize all of your equipment, especially the five-gallon container. [1]
    • You can use an iodine solution, known as an iodophor, to sterilize everything. The solution is readily available from most home brewing outlets. [2]
  2. Watermark wikiHow to Make Applejack
    You want to make sure that all of the apple cider you use is free of preservatives and has no sugar added, especially since you will add your own sugar. Pour the first gallon of apple cider into the large pan and heat over medium heat. [3]
    Advertisement
  3. Once the gallon of apple cider reaches approximately 110 °F (43.3 °C), begin stirring in all five pounds of brown sugar. Keep stirring in the sugar until all five pounds have fully dissolved in the apple cider. [4]
  4. Watermark wikiHow to Make Applejack
    Once all of the sugar has been stirred into the gallon of cider, you also want to add the packet of brewer’s yeast. If the apple cider has reach over approximately 115–120 °F (46.1–48.9 °C), then let it cool to this temperature before added the yeast. [5]
    • Temperatures over 130 °F (54.4 °C) will kill the yeast instead of activating it, and temperatures under 105 °F (40.6 °C) won’t activate the yeast at all, so it’s very important to add with the cider in the correct temperature window. [6]
    • Follow the directions on your particular packet of brewer’s yeast for the amount of time the yeast should be kept at the activation temperature.
  5. Once you’ve added the yeast at the proper activation temperature and kept if there for the correct amount of time, you can remove the cider from the heat source. It needs to cool enough so that you can add it to the airtight five-gallon container without causing pressure issues as it cools. [7]
    • Since the cider wasn’t overheated to begin with, this will only need to cool for five-to-ten minutes.
  6. Watermark wikiHow to Make Applejack
    While waiting for the yeast and brown sugar cider to cool, you can add the rest of the apple cider to the sterilized five-gallon container. [8]
    • Only add a little bit of the fourth gallon because the additions to the heated cider will result in a bit more than five total gallons, and you don’t want to overflow the container.
    • If you have a five-gallon container meant for brewing, that’s great. If you don’t, you can even use a five-gallon water jug. However, you have to make sure that you still have the cap if you use a water jug, and you have to make sure that it seals properly. [9]
  7. Once the heated cider has cooled for ten minutes, you can add it to the rest of the apple cider in the five-gallon container. Then add a bit more of the final gallon of cider, but not all of it. The five-gallon container should still have several inches of room left at the top of it.
    • As the yeast feeds on the sugar in the mixture, it will foam and create pressure. If the container is too full, then you can end up with a mess on your hands. [10]
  8. A brewer’s airlock is a device that allows pressure to escape the container without allowing any outside air in. Attach the airlock to the cap by following the instructions for the specific unit you purchased.
    • You’ll easily be able to find the device at the same home brewer’s store where you found your yeast.
    • The airlock will also require about an ounce of water inside it. This allow the gas to escape up through the water without allowing any outside air to pass down in. [11]
  9. You now want to allow the applejack to ferment for a minimum of six days. However, the longer you allow the yeast to feed, the higher the alcohol content of the applejack will be. [12] Closer to ten days is going to give the applejack more bite.
    • Especially if you’re using a clear water jug, you want to store the container in a dark place because too much sunlight can kill the yeast.
    • Give the container a tap once a day. You don’t want to shake it hard—just give it a tap or a rattle to send any gas in the liquid up to the surface to vent to keep from building too much pressure. [13]
  10. Once you’ve waited your six-to-ten days for the yeast to do its job, it’s time to bottle the applejack. Begin by sterilizing the original gallon jugs in which your apple cider came. You can sterilize them with the same iodophor as the larger container. You also want to sterilize the small hose or piece of tubing you have to move the applejack.
  11. Watermark wikiHow to Make Applejack
    You will see a layer of sediment from the yeast at the bottom of the larger container. Insert the sterilized tube to a level just above the sediment so you won’t get any of it, and siphon the applejack out of the five-gallon container and into the smaller, sterilized one-gallon containers.
    • Make sure that you still have the caps in order to seal the one-gallon containers.
    • Realistically, you can simply refrigerate the mixture at this point to kill the yeast, and you’ll have an apple wine that is in the neighborhood of 40 proof—20% alcohol. However, you can freeze off some of the water in the current mixture to increase the alcohol content further and possibly even double it. [14]
  12. Once you have all of the applejack sealed in the smaller containers, freeze them. You want the contents of each container to be frozen solid before moving on to the next step. [15]
  13. After you have frozen the containers solid, open them, tip them upside down and let them drip into mason jars. Since water freezes at a much lower temperature than alcohol, the liquid that drips into the jars will be concentrated applejack as it separates from the still frozen water above. [16] You will fill several jars as the content continues to melt and release more alcohol.
    • You will visibly see the frozen portion losing its caramel color as the alcohol drains and leaves behind the ice.
    • The process can take an hour and a half or two hours, so be patient.
    • If you truly want to separate the water out as much as possible, then pour the contents of the jars back into the jugs once you’ve dumped out the melted water and freeze them again. After two or three times through the distillation process, you’ll notice that the contents don’t freeze at all. Your applejack will be closer to 80 proof—40% alcohol—when this happens. [17]
  14. Once you have removed much of the water and impurities from your applejack, it is ready to drink. Always enjoy in moderation!
  15. Advertisement
Method 2
Method 2 of 2:

Making Apple-Infused Brandy

PDF download Download Article
  1. Though not technically applejack, apple and brandy pair well together, and infusing brandy with natural apple flavoring is a fun alternative to making homemade applejack. In order to infuse the brandy with natural apple flavoring, you will need to begin by peeling and chopping from fresh apples. Two cups worth is enough for this recipe. [18]
  2. Watermark wikiHow to Make Applejack
    To give your infused spirit some extra spice and cider-flavored goodness, try adding three cinnamon sticks to the apples and water. [19]
  3. To help release all of the natural flavors and to kill any germs that you don’t want to add to your infusion, you should heat the mixture for ten minutes on medium heat. [20]
    • The mixture should be covered during heating.
  4. Watermark wikiHow to Make Applejack
    Once you have heated the mixture, add the 2 1/2 cups of sugar. Stir in the sugar and continue stirring over heat until the sugar has dissolved in the mixture. [21]
  5. After the sugar has fully dissolved in the mixture, remove it from the heat and allow it to cool. It doesn’t have to cool to room temperature, but it needs to cool enough that placing it in an airtight bottle won’t create any pressure problems as the liquid cools further.
  6. Once the mixture has cooled to warm but not scalding, add it to a large glass container. [22]
    • It’s very important to make sure that the container can be sealed airtight.
    • Add the entire mixture, not just the apples and liquid.
  7. Watermark wikiHow to Make Applejack
    Now that you have finished the process for prepping the mixture, you can combine the brandy with the apples and sugar. [23]
  8. The final ingredient for this recipe is the three cups of dry white wine, which you should now add to the mixture. [24]
  9. Watermark wikiHow to Make Applejack
    Once you have combined all of the ingredients and given them a good mixing, it is time to seal the container. Once sealed, you want to store the container in a cool dark place to get the most out of the infusion. [25]
  10. Being patient is an important element in knowing how to make apple brandy. The infusion process takes time, and you should wait at least three weeks before opening the container. [26]
    • Every 3 days, shake the container to stir up any sediment and combine the ingredients. [27]
  11. Watermark wikiHow to Make Applejack
    Once the three full weeks has past, it is time to open the container, but don’t drink your apple brandy just yet. Strain the mixture through a double layer of cheesecloth to remove any sediment. [28]
  12. Though it was time to remove the infusion mixture from the liqueur, the apply brandy is not quite ready yet. Add the mixture to a glass bottle that you can seal. [29]
  13. Again, patience is an important part of knowing how to make apple brandy. Like last time, you should store the bottle in a cool dark place. However, you do not need to worry about shaking the contents of the bottle after they have been strained. [30]
  14. All of your time and patience has now paid off. Once the two-week window has past, you are free to open and enjoy your apple brandy by itself or mixed in a cocktail.
  15. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Do I need to keep applejack in a fridge?
    Community Answer
    No, you just need to keep it in a cool, dry place.
  • Question
    Can I use pasteurized cider to make applejack?
    Matthew Ferguson
    Community Answer
    Yes, as long as there are no preservatives added to the cider; preservatives may kill your yeast and should never be added to your fruit/juice when making a fermented product.
  • Question
    How much yeast do I use for 5 gallons of applejack?
    Joseph Baurys
    Community Answer
    Two grams of a good brewer's yeast per gallon is standard. I recommend Home Brew Stuff (~$18/lb), which can be found on Amazon and most brew stores.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      • The distinctive flavor of apple brandy makes it a popular addition to many meals. It can be used to add extra zing to desserts like cake, ice cream, or pie, or added to glazes that add a special flavor to ham or pork chops.
      • Brandy usually has 35-60% alcohol by volume.
      • Apple brandy is often used as an ingredient in many popular cocktails, like a Manhattan or an Old Fashioned, that call for a distilled spirit.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Too much applejack or apple-infused brandy can be highly intoxicating; enjoy this drink in moderation.
      Advertisement

      About This Article

      Article Summary X

      To make applejack, start by heating apple cider, brown sugar, and brewer's yeast in a large pot. Then, pour the mixture into a container along with some more apple cider and then seal the container shut with a brewer's airlock. Store the mixture somewhere dark for a week and then siphon it out of the original container into a new container so there's no yeast sediment. Once you've done that, put the new container in the freezer and leave it in there until the mixture is frozen solid. Finally, separate the applejack from the water in the container and enjoy. If you want to learn how to infuse brandy with apple flavors, keep reading the article!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 244,892 times.

      Reader Success Stories

      • Anonymous

        Oct 22, 2016

        "Good instructions. More complicated than expected, but realistic. Already make apple pie liqueur. More to add to ..." more
      Share your story

      Did this article help you?

      Advertisement