How to Make Ash Soap

PDF download Download Article
PDF download Download Article

Ash soap is made from lye derived from hardwood ash. Once you concentrate the lye water, you can turn it into soap by cooking it with fat. Traditional colonial recipes used animal fat, but you can use other types of fat too. Because of the unique type of lye used to make it, ash soap does not produce much lather. It is also much softer than other types of soap. This does not make it any less effective than other types of soap, however!

Ingredients

Lye

  • 10 cups (1.44 kg) white hardwood ashes
  • 1 1 ⁄ 2 to 2 gallons (5.7 to 7.6 L) soft water

Soap

  • 3 ⁄ 8 cup (89 mL) concentrated lye
  • 1 cup (240 mL) melted fat (lard, coconut oil, etc.)
Part 1
Part 1 of 4:

Extracting the Lye

PDF download Download Article
  1. Lye made from wood ash (potassium hydroxide) is less caustic than store-bought lye (sodium hydroxide), but it can still cause severe burns. It is vital that you keep your skin and eyes protected. [1]
    • Use rubber gloves that go up to your elbows. A pair of rubber boots would also be a good idea.
    • Don’t take the old clothes, gloves, and goggles off until after you have finished making and pouring the soap.
  2. Burn some hardwood until the fire goes out. Gather the ashes and shift them through a sieve into a container. Keep the white ashes in the container and discard the black ashes caught in the sieve. [2]
    • Black ashes contain too much carbon to produce good lye.
    • Ash, hickory, and maple are all great choices for hardwood, but you can also use others. Avoid softwood, like pine; it won't make good lye for bar soap.
    • You may be able to buy the ashes online instead of burning them yourself. Make sure that they come from hardwood and don't contain any pieces of black charcoal.
    Advertisement
  3. Turn a 5 US gal (19 L) plastic bucket upside-down, then drill a finger-thick hole into the bottom. You can also use a wooden barrel or a clay pot instead of a bucket. [3]
    • A large planter with a drainage hole in the bottom is a great option for this, because the hole will already be the right size. You don’t have to drill anything.
  4. Cover the bottom 1 to 2 inches (2.5 to 5.1 cm) of the bucket with rocks. Add a thick layer of straw on top, then place 10 cups (1.44 kg) of white hardwood ash on top. Use enough straw so that the ash sits at least 1 to 2 inches (2.5 to 5.1 cm) below the top edge of the bucket. [4]
    • If you can't find dried grass, hay or pine needles will also work.
    • Pack the ash down as much as possible. This will make it thinner and take up less space.
    • The grass layer should be the thickest, followed by the stone layer.
  5. Set a stainless steel pot on the ground, then stack some bricks to either side of it. Lay a couple of boards across the bricks so that they cover the pot, then set your bucket on top. Leave a crack between the boards so that the drainage hole is exposed. [5]
    • Make sure that the stainless steel pot is big enough to hold at least 1 gallon (3.8 L) of water.
    • You can use a different setup, as long as water can flow through the bucket and into the pot. For example, if the bucket is big enough, you could set it on top of the pot.
    • Do not use aluminum pots, or the lye will corrode it. Use only stainless steel or enamel. A crock pot may also work.
    6. Advertisement
Part 2
Part 2 of 4:

Extracting and Concentrating the Lye

PDF download Download Article
  1. Rainwater would be the best, but you can also use distilled water. Do not use regular tap water, even the filtered kind, as it contains too many minerals and chlorine. [6]
    • You don’t have to use a stainless steel pot to boil the water since you won’t be putting the lye into this pot.
    • The water needs to be hot in order to extract the ash, so keep it at a constant boil. Alternatively, boil the water in smaller, 1 ⁄ 2 gallon (1.9 L) batches instead.
  2. Measure out 1 ⁄ 2 gallon (1.9 L) of boiled soft water, then carry it over to the bucket containing the ashes. Pour the water into the bucket. [7]
    • Don’t pour all 1 1 ⁄ 2 to 2 gallons (5.7 to 7.6 L) of water into the bucket. You want to do this in small increments.
  3. Be aware that it may take a little longer for the water to drain through. You will also end up with a little less than 1 ⁄ 2 gallon (1.9 L) water in the pot, because some of the water would have been absorbed by the grass and stones. [8]
    • Instead of looking at the amount of water, pay attention to the dripping. Once the water has stopped dripping, it's time to add more water.
  4. Keep adding the water in 1 ⁄ 2  US gal (1.9 L) increments until you have 1 gallon (3.8 L) of lye water in the pot. Wait 30 minutes for each batch of water to drain through. [9]
    • The water needs to be boiling-hot when you pour it into the bucket. Re-heat it if needed.
    • If you don't have 1 gallon (3.8 L) of lye water, repeat the whole process using more ashes and water.
    • Test the pH of the lye water with pH strips, if desired. The pH should be 13. [10] It is not absolutely necessary, however.
  5. Place the pot on the stove and turn the heat up to medium-high. Let the lye water come to a boil. As the lye boils, it will thicken. Once it reduces to 3 ⁄ 8 cup (89 mL), you’re ready to move on. [11]
    • Be patient. This can take 3 to 4 hours.
    • Keep a close eye on the pot once the lye water reduces to 1 quart (0.95 L). You don’t want to overcook it.
    • If you go below 3 ⁄ 8 cup (89 mL), just add more soft water.
    6. Advertisement
Part 3
Part 3 of 4:

Making the Soap

PDF download Download Article
  1. Choose a fat or oil, such as lard, tallow, coconut oil, or olive oil. Measure out 1 cup (240 mL) and place it into a small saucepan. Heat it over medium heat until the fat liquifies and turns warm. [12]
    • You should do this even if you are using a liquid fat, such as olive oil; you need the fat to be warm.
    • Keep in mind that the type of fat you use will have an affect on the ratio. It would be a good idea to check out an online soap-making calculator .
    • You can combine fats. For example, you can use olive oil and shea butter. Check the proportions using an online soap-making calculator.
  2. If the lye cooled down, heat it back up over medium heat until it is warm again first. Slowly pour the warm lye into the melted fat. Give the mixture a stir, then let it cook for 3 minutes until it thickens and turns smooth. [13]
    • If you took off your safety gear earlier, make sure that you put it back on for this step in case the lye splashes.
    • Ash soap tends to be very soft. If you want a harder bar of soap, add ¼ teaspoon of salt.
  3. Lower the heat so that the soap is no longer bubbling, but so that it is still warm. You need it to be around 100 °F (38 °C) at this point. Stir the soap with a long-handled wooden spoon for 1 minute. [14]
    • Use a candle-making or soap-making thermometer to keep track of the temperature.
  4. Let the soap cook on the stove for 10 to 15 minutes. Next, stir the soap continuously for 1 minute with your long-handled wooden spoon. [15]
    • Get used to this process because you will be repeating it a few times.
  5. Be sure to stir the soap for 1 minute each time you stir it. How many times you repeat this waiting and stirring process will vary each time you make the soap. It can take as little as 30 minutes to as long as 3 hours. The soap is ready when it turns golden brown and you can draw a streak through it with a spoon. [16]
    • Once the soap turns golden brown, pull the tip of a non-metal spoon across the top. If the streak stays, the soap is ready. If you don't see a streak, the soap's not ready.
  6. Refer to a soap recipe for this step or make up your own combination. If you choose the latter, however, refer to a soap-making calculator or an existing recipe with similar ingredients to find out how much of each ingredient you should use. [17]
    • Dried lavender is very popular in soap, but you can also experiment with lemon zest, loose-leaf tea, and chamomile.
    • Coffee is a great exfoliant, but you can also try coarse sea salt, ground walnut shell, or ground apricot seeds.
    • Essential oils are a great way to add fragrance to your soap. You can also use soap-making fragrance oils.
    7. Advertisement
Part 4
Part 4 of 4:

Pouring and Curing the Soap

PDF download Download Article
  1. This is not essential, but it will make the demolding process easier. Tear off a strip of wax paper that’s longer than your mold, then tuck it inside, making sure to make the corner creases nice and neat. [18]
    • You can use other soap-making molds as well. If you can use the mold for traditional hot- or cold-process soap, then you can use it here.
  2. Hold the pot over the mold, then gently tip the soap into it. Move the pot back-and-forth from 1 end of the mold to the other. Work quickly but carefully. You don’t want to spill the soap, but you also don’t want it to cool down too fast. [19]
  3. This is important because it will slow down the cooling process. If you let the soap cool down too fast, it may turn brittle and develop cracks. During this time, keep the soap some place warm and dry where it won't get bumped or moved around. [20]
    • Don’t stop at just 1 towel. You can layer several towels or blankets on top of the mold as well!
  4. Continue to store the soap some place warm and dry where it won't be disturbed. Once the soap has hardened, take it out of the mold. How you do this will depend on how your mold is constructed. [21]
    • Some molds need to be taken apart in order to get to the soap. Other molds simply have to be turned upside-down, like a cake pan.
    • You can cut the soap a few days earlier while it is still in the mold. It will be soft and thus easier to cut.
    • If you lined the mold with wax paper, it may get stuck to the soap. In this case, just peel it off.
  5. You can use a special soap cutting knife for this, or you can use a regular knife instead. If you pour the soap into individual molds, then you don't have to cut them since they are already a convenient size.
  6. Halfway through the curing process, about 1 to 3 weeks, flip the soap bars over. This will help ensure that they cure evenly on all sides. [22]
  7. Wrap the soap in plastic wrap or store it in an airtight container. Keep the soap in a cool, dry place. Too much warmth or moisture may cause the soap to melt. Homemade soap, including ash soap, can last indefinitely, although it may shrink and harden over time.
    • If you used essential oils, you may notice the fragrance fading after about 1 year. This does not affect the soap itself, however.
    8. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How much fat is used for the 12oz of lye?
    Community Answer
    Different oils will need differing amounts of lye to saponify. For example, olive oil will need a very different amount than lard or tallow. Use an online saponification calculator to correctly calculate how much of each to use.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 11
  • Question
    What kind of preservatives should I use?
    Community Answer
    Soap doesn’t need preservatives; it should be cured for 4 - 6 weeks, which helps the water evaporate and makes the bar harder.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 4
  • Question
    What is responsible for the brown or tan color of the soap?
    Community Answer
    The amount of sugar in the batter causes heat. The more heat, the darker the color can be. The age of the soap is can also change the color.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 7
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Ash soap does not produce as many suds as traditional soap. If you really want the suds, use a loofah with it. [23]
        Thanks
        Helpful 0 Not Helpful 0
      • Ash soap may develop a white film. Simply wash it off and use the soap. This typically happens if the soap cooled too quickly while in the mold. [24]
        Thanks
        Helpful 0 Not Helpful 0
      • If the soap is turning too greasy, raise the temperature and mix it again. If that doesn't help, use more lye next time. [25]
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Do not use tin, aluminum, Teflon, or copper soap molds as they will react with the lye.
        Thanks
        Helpful 9 Not Helpful 1
      • Never handle lye without proper safety gear. It will burn through your skin.
        Thanks
        Helpful 2 Not Helpful 0
      • Do not use candle-making fragrance oils. These are not the same as essential oils or soap-making oils; they are not skin-safe.
        Thanks
        Helpful 1 Not Helpful 0
      Advertisement

      Things You’ll Need

      • Sieve (for separating the ashes)
      • 5 US gal (19 L) wood or plastic bucket
      • Stainless steel or enamel pot
      • Soap mold(s)
      • Glass measuring cup
      • Long-handled wooden spoon
      • Safety gloves
      • Safety goggles
      • Old clothes
      • Rubber boots
      • Dried herbs, exfoliants, and essential oil (optional)


      You Might Also Like

      How to
      Make Handmade Soap
      How to
      Melt Soap & Remold It into a New Bar
      How to
      Make a Soap Bar at Home without Handling Lye
      How to
      Melt a Soap Bar
      How to
      Make Your Own Soap
      How to
      Make Glycerin
      How to
      Make Lye
      How to
      Make Natural Organic Soap: A Beginner-Friendly DIY
      A Guide to Making Vegetable Glycerin At Home
      How to
      Cut Soap
      How to
      Make Liquid Castile Soap
      Easy DIY Turmeric Soap Recipes
      How to
      Make Glycerin Soap
      How to
      Make Black Soap
      Advertisement

      References

      1. ↑ https://www.primalsurvivor.net/wood-ash-soap/
      2. ↑ https://www.primalsurvivor.net/wood-ash-soap/
      3. ↑ https://www.primalsurvivor.net/wood-ash-soap/
      4. ↑ http://www.soap-made-easy.com/make-lye.html
      5. ↑ https://www.primalsurvivor.net/wood-ash-soap/
      6. ↑ https://farmingmybackyard.com/homemade-soap-from-ashes/
      7. ↑ https://farmingmybackyard.com/homemade-soap-from-ashes/
      8. ↑ https://farmingmybackyard.com/homemade-soap-from-ashes/
      9. ↑ https://farmingmybackyard.com/homemade-soap-from-ashes/
      1. ↑ https://www.primalsurvivor.net/wood-ash-soap/
      2. ↑ https://farmingmybackyard.com/homemade-soap-from-ashes/
      3. ↑ https://www.primalsurvivor.net/wood-ash-soap/
      4. ↑ https://farmingmybackyard.com/homemade-soap-from-ashes/
      5. ↑ https://www.primalsurvivor.net/wood-ash-soap/
      6. ↑ https://www.primalsurvivor.net/wood-ash-soap/
      7. ↑ https://farmingmybackyard.com/homemade-soap-from-ashes/
      8. ↑ https://www.primalsurvivor.net/wood-ash-soap/
      9. ↑ https://www.primalsurvivor.net/wood-ash-soap/
      10. ↑ https://www.primalsurvivor.net/wood-ash-soap/
      11. ↑ https://www.primalsurvivor.net/wood-ash-soap/
      12. ↑ https://www.primalsurvivor.net/wood-ash-soap/
      13. ↑ https://farmingmybackyard.com/homemade-soap-from-ashes/
      14. ↑ https://www.primalsurvivor.net/wood-ash-soap/
      15. ↑ https://www.primalsurvivor.net/wood-ash-soap/
      16. ↑ https://www.primalsurvivor.net/wood-ash-soap/
      17. ↑ https://www.primalsurvivor.net/wood-ash-soap/

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 134,978 times.

      Reader Success Stories

      • Polly Lathrop

        Dec 29, 2016

        "This is an excellent article for people just starting out on a soap making venture. We should all learn basic ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement