How to Make Black Leather Dye

Co-authored by Mallika Sharma

Last Updated: March 21, 2024 References

Dark black leather has a distinctive, sophisticated look. If you have undyed, vegetable-tanned leather you want to turn black, you don’t have to buy black leather dye at the store. You can make it at home from cheap materials, most of which you probably already have lying around. You’ll just need some vinegar and some steel wool to make the dye, and some baking soda to make a neutralizer. This particular kind of black leather dye is called vinegaroon, and it will turn your leather a rich, dark black color.

Part 1

Part 1 of 2:

Preparing the Dye and Neutralizer

Download Article

1
Soak some steel wool in a bucket with a bottle of acetone for 2 hours. Place the steel wool in the bucket first and then pour in the acetone, to avoid splashing acetone. Soaking in acetone will make the steel wool more susceptible to oxidation. This way the steel wool will rust more easily when you add the vinegar. ^{[1]
X
Research source}
- Steel wool that's graded #0000 will work the best, but feel free to use whatever you have around the house.
- Acetone is often sold as nail polish remover. ^{[2]
  X
  Research source}
2
Put some steel wool into a glass jar. Make sure to use a glass jar, and not a metal container. Vinegar corrodes metal, so it would eat up a metal container! Separate the steel wool with your hands before placing it in the jar to make sure it has as much surface area as possible. ^{[3]
X
Research source}
- Steel wool can be sharp when you separate it, so consider wearing gloves to protect your hands.
Advertisement
3
Warm up several cups of distilled white vinegar on the stove. Pour the vinegar into a pot and heat on the stove for a few minutes, until it reaches about 100 Fº (38 Cº). The warmth of the vinegar will help speed up the reaction. ^{[4]
X
Research source}
- You can check the temperature of your vinegar while it’s heating by placing a kitchen thermometer into the pot.
4
Pour the vinegar into the jar and cover the jar with saran wrap. Fill the jar until it is almost at the top. Seal the jar with saran wrap and a rubber band. Punch some holes in the saran wrap so that gases can escape. After a few days, the vinegar will rust the steel wool. ^{[5]
X
Research source}
- Covering the jar most of the way will prevent debris from getting in. ^{[6]
  X
  Research source}
5
Let the jar sit for 3 days to a week. Every day, open the jar, stir the solution, and check the color. When the liquid has an opaque, light brown color, it is ready to use. The longer you wait, the darker it will get. ^{[7]
X
Research source}
- Don’t worry if your solution smells bad, that means it’s working!
Aim for a ratio of 1 part baking soda to 16 parts water. Baking soda will make a neutralizer that cuts the smell of the vinegar solution. It will also prevent the black leather dye from rubbing off your leather and getting onto other surfaces once it has set. ^{[8]
X
Research source}
7
Fill the baking soda jar with water and stir. Use room temperature water. The water will dissolve the baking soda to make your neutralizer. Stir until all the baking soda has dissolved. The baking soda should be barely visible in the water. ^{[9]
X
Research source}
- Once the baking soda has dissolved, set aside the neutralizer solution.

Part 2

Part 2 of 2:

Dyeing Your Leather

Download Article

1
Test the dye by painting it on a small scrap of leather. Avoid touching the solution with your hands. Check to see if the leather has a dark matte color. If not, try adding more steel wool and letting the solution soak for several more days. If the scrap of leather comes out black, the dye is working! You’re ready to use it on whatever you want to dye. ^{[10]
X
Research source}
- If your solution has sludge on top, you can strain it through a strainer to leave the sediment behind. ^{[11]
  X
  Research source}
Use a paintbrush or a dauber to apply the vinegar solution. Don't worry if the dye appears clear when you first apply it, or if the leather doesn’t look dark at first. After a few minutes, it will turn dark. ^{[12]
X
Research source}
As the dye gradually seeps into the leather, it will turn the leather into a rich, dark black. If after 3 minutes, the leather is the color you want it to be, move on to neutralizing your leather. If not, you can apply a second coat. ^{[13]
X
Research source}
Again, apply the dye with a paintbrush or dauber. Wait 3 minutes for the dye to seep in, and check the color. Repeat until your leather is the desired darkness. ^{[14]
X
Research source}
5
Neutralize the leather with the baking soda solution. Once your leather is dark enough, it’s time to neutralize the acid from the vinegar. Apply the neutralizer with a paintbrush. ^{[15]
X
Research source}
- Leave the neutralizer on the leather for at least 20 minutes. This will give time for the baking soda solution to seep into the leather and remove the acidity.
- If a residue of baking soda remains after 20 minutes, dab the leather with a damp cloth to clean.
6
Condition the leather with leather conditioner. Put some conditioner onto a soft cloth. Rub the cloth over the leather gently. This will prevent the leather from cracking. Now your leather is dyed and finished!
- The vinegar smell might linger for a few weeks, but with plenty of airing out, it should dissipate.

Community Q&A

Search

Add New Question

Question

I want to change the color of a pair of boots from brown to black, will this work for this purpose?

CrazyGirl4

Community Answer

If the boots are leather it should. It depends on the boots. It may be cheaper/easier/safer to buy a new pair of boots.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 1

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Things You'll Need

1 bottle of acetone
2 glass jars
Saran wrap
1 rubber band
1 package of #0000 steel wool
1 bottle of white vinegar
1 box of baking soda
Leather conditioner

Tips

This dye also works on oak! If you have a piece of oak wood you’d like to dye black, paint it with this black leather dye. ^{[16]
X
Research source}

Thanks
Helpful 1 Not Helpful 0
Remember, this dye only works on vegetable-tanned leather!

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Vinegar is slightly caustic and can cause irritation to the skin. Make sure to rinse your hands if you come in contact with vinegar.

Thanks
Helpful 0 Not Helpful 1
Wear glasses or goggles to prevent vinegar getting in your eyes.

Thanks
Helpful 0 Not Helpful 0

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

Log in

How to Make Black Leather Dye

Steps

Preparing the Dye and Neutralizer

Dyeing Your Leather

Community Q&A

Video

Things You'll Need

Tips

Warnings

You Might Also Like

References

About This Article

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories