How to Make Clay Beads

Co-authored by Sarah Stearns

Last Updated: November 21, 2024

Clay beads are simple and fun to make. They make great statement jewelry, charms, and key chains. You can make them using air-dry clay or polymer clay.

Method 1

Method 1 of 2:

Using Air Dry Clay

Download Article

1
Protect your work surface. Air-dry clay can get messy, it's a good idea to protect the table you will be working on. You can simply spread out some newspaper or a cheap, plastic tablecloth. If your project is very small, you can even work on a tray or baking sheet. This will make cleaning up much easier.
- This method will work for stone clay, natural clay, and paper clay.
2
Cut off however much clay you need and wrap the rest of the clay back up. Most air-dry clays come in big blocks. You likely won't need the entire block, so just cut off a small amount and wrap the rest of the clay back up in its packaging. This way, the rest of clay won't dry out.
- Most air-dry clays will come wrapped in plastic. If yours came in a tub, simply put the lid back on.
- Is it better to cut off less clay than you think you might need. A little bit goes a long way, and you can always cut more clay off later.
Advertisement
3
Cut the clay into cubes or roll it into a tube. If you are going to make ball-shaped beads, cut the clay up into small, evenly-sized cubes. It will be easier to shape them later on. If you are going to make tube or disc-shaped beads, roll your clay out into a tube; try to make it between the thickness of a pencil and your finger.
- Make the clay cubes between the size of a pea and a blueberry. Larger, grape-sized beads may take too long to dry.
- If your clay is difficult to work with, dip your fingers into a cup of water and smooth them over the clay. The water will help soften it.
4
Start shaping the clay. If you are making round beads, roll the cubes between your palms. If you are making tube or disc-shaped beads, cut the clay roll to the length you need using a sharp knife.
- For discs, try to make them about ¼ inch (0.64 centimeters) thick.
- For tubes, try to make them between ½ and one inch (1.27 and 2.54 centimeters) thick. You can leave the cut edges as they are or taper them using your fingers.
Dip your finger in water and run it over the bead's surface until it is smooth. Keep doing this until you get the texture you want. Remember, once the clay dries, it will be very difficult to change or repair it.
6
Poke holes into the beads using a tapestry needle or a toothpick. Use a tapestry needle for smaller beads, and a toothpick for larger beads. Be careful not to smooth the beads.
- If you made tube-shaped beads, poke the hole from top to bottom—the flat parts, not the curved.
- If you made disk-shaped beads, poke the hole from the side—the narrow edge part. This way, when you string the beads, they will look like circles.
How long it takes will depend on how warm or humid it is. It will also depend on how large your beads are; larger/thicker beads will take longer to dry. Most beads will need about a day to dry fully. The clay will lighten in color as it dries. For example, most grayish clays will turn white when they dry, and red/brown clays will turn a lighter shade.
8
Paint the beads using acrylic paint and let them dry. Stick them back onto the needle/toothpick, and place the needle/toothpick between two level objects. This will allow the beads to hang freely and allow you to paint them from all sides. If you wish to add designs to your beads, paint the beads a solid color first, let the paint dry, then add your designs. Here are some ideas to get you started:
- Dots
- Stripes
- Simple flowers
- Swirls
This will not only give the beads a nice finish, it will also protect the paint. You can spray the beads with an acrylic sealer, or paint them with a clear acrylic sealer. For a glazed look, choose something with a glossy or high-gloss finish. For a natural look, choose a matte, semi-matte, or satin finish.
You can string them onto beading cord or elastic, and wear them as jewelry. You can also use them to make key chains, charms, and bookmark dangles.

Method 2

Method 2 of 2:

Using Polymer Clay

Download Article

Polymer clay is very good at picking up dirt and specks of dust. Wash your hands with soap and water. Wipe down your work surface with some household cleaner and a paper towel.
Some colors, such as red, stain skin very easily. Other colors, such as white, pick up stains. If you are working with several different colors, wipe your hands clean with the baby wipes.
3
Cut off a small amount of clay and knead it. Most polymer clays will be hard when you first get them, but they will soften up the more you work with them. In general, the solid colors will require more kneading than the glittery or pearly colors.
- If your clay is too hard to work with, consider working in some clay conditioner or clay softener. You can usually buy it in the same aisle that sells polymer clay.
4
Shape your clay. Polymer clay is great in that it does not require water to be smoothed. It also does not harden or dry unless you bake it in the oven. Take your time to create your beautiful beads. Here are some shaping ideas to get you started:
- To create a sphere: roll a small amount of clay between your palms until it is smooth and round.
- To create discs: roll your clay into a thin cylinder or tube shape, about the thickness of a pencil. Use a sharp blade to cut the cane into discs.
- To create tapered tubes: roll your clay into a thin cylinder, about the thickness of a pencil. Cut the cane into ½ to one inch (1.27 to 2.54 centimeters) pieces. Use your fingers to pinch the ends of each mini-tube.
- Consider making a little animal shaped bead. Keep the design simple.
Polymer clay will soften the more you work with it. Sometimes, it may even become sticky and mushy. When this happens, the best thing to do is to set it aside for 10 to 15 minutes. You can also let the clay cool down in the fridge.
If the clay is too soft and starts to lose its shape as you poke the needle through it, set it aside or stick it in the fridge. Let the clay sit for about 15 minutes until it firms up again. Once the clay is firm, you can try poking the holes again.
Polymer clay picks up fingerprints very easily. These can be sanded out once you bake the clay, or they can be brushed out with a soft paintbrush. Simply brush the surface of the beads until the finger prints disappear. You do not need to use water.
Different brands will require different baking times. Refer to the packaging or the manufacturer's website for exact baking times. Most polymer clays will bake at 275 °F (135 °C) for 15 minutes per ¼ inch (0.64 centimeters) thickness.
After you take the clay out of the oven, it will be very hot. Let the clay cool down before you touch it. If you see any sharp or jagged edges, smooth them away with some fine-grit sandpaper. The clay may turn chalky when you do this. This is just dust. Simply rinse the clay under running water, and pat it dry with a paper towel.
Slide the beads back onto the toothpick or tapestry needle. Set the toothpick or tapestry needle down between two objects, so that the bead hangs freely. You can either spray or paint the beads with a clear glaze. Let the glaze dry and cure fully before you move the beads; if you use them too soon, the glaze may turn sticky. This may take two to four hours.
You can string them onto clear beading elastic to make jewelry. You can also use them to make bookmark tassels or key chains.

Community Q&A

Search

Add New Question

Question

What if I need to take a break and work the next day?

Community Answer

If you are working with air dry clay, place the beads on a tray, spritz a sheet of plastic wrap with water, then cover the tray with it. Th plastic wrap will try moisture and keep the clay from drying out. If you are working with polymer clay, simply cover it with some plastic wrap, a bowl, a cup, or anything else to keep it dust free.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 10
Question

Do I need a kiln for polymer clay?

Community Answer

No. You can use your home oven.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 8
Question

Will polymer clay ever harden like air dry clay?

Community Answer

No. Polymer clay does not harden until you bake it. It may become brittle if you do not use it for several years, however.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 8

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Reader Videos

Submit a Video Tip!

Share a quick video tip and help bring articles to life with your friendly advice. Your insights could make a real difference and help millions of people!

Submit a Video

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Things You'll Need

Using Air Dry Clay

Air dry clay
Tapestry needle or toothpick
Water (recommended)
Craft knife
Acrylic paint
Acrylic sealer
Paint brushes

Using Polymer Clay

Polymer clay
Tapestry needle or toothpick
Baby wipes (optional)
Craft knife
Sandpaper (optional)
Acrylic sealer
Paint brushes

Log in

How to Make Clay Beads

Steps

Using Air Dry Clay

Using Polymer Clay

Community Q&A

Reader Videos

Tips

Things You'll Need

Using Air Dry Clay

Using Polymer Clay

You Might Also Like

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories