PDF download Download Article
Learn how to make your own ferrofluid and discover how it works
PDF download Download Article

Looking for a cool science experiment you can do at home? Look no further! Ferrofluid, or ferripaste, is an easy, fun-to-make magnetic oil that only needs 2 ingredients: motor oil and iron oxide powder. When you mix these 2 things together, it creates a special “fluid” that almost behaves like a solid, especially in the presence of a magnet. So what are you waiting for? To make your very own ferrofluid to play around with, read this article!

Things You Should Know

  • Mix 10 grams (0.3 oz) of motor oil with 10 grams (0.3 oz) of iron oxide powder in a petri dish .
  • Use a magnet to manipulate the ferrofluid to make peaks and valleys.
  • Because the iron oxide is magnetic and suspended in the oil, a magnet can manipulate it.
  • Store ferrofluid in an airtight container. When you’re done, dispose of the ferrofluid in the trash.
1

Pour 10 grams (0.3 oz) of motor oil into a dish.

PDF download Download Article
  1. Measure out the motor oil using an electronic scale . Then, pour the oil into a shallow dish made of thin plastic, like a petri dish . [1]
    • The viscosity of the motor oil doesn’t matter here. As long as it’s motor oil, it will work!
    • Petri dishes are ideal, because they’re thin enough for a magnet to penetrate.
    • Some people have also had success using vegetable oil instead of motor oil. However, vegetable oil is very thin, and may not combine with the iron oxide as well.
  2. Advertisement
2

Add 10 grams (0.3 oz) of iron oxide powder.

PDF download Download Article
  1. Iron oxide powder creates the magnetism in ferrofluid. Use your electronic scale again to measure your iron oxide. Then, pour the iron oxide into the motor oil. [2]
    • You may have heard about harvesting iron oxide from cassette tapes using acetone. If you’d like to try this method, break apart cassette tapes and soak the tape in acetone for 1 hour outside. Then, use a knife to gently scrape the iron oxide off the tape into a dish. Just keep in mind that many people have tried this method with little success, so it’s a better idea just to buy iron oxide outright.
    • You can also make ferrofluid with magnetic ink developer or ferric chloride, but these are very expensive. Iron oxide is much more affordable.
4

Place a magnet under the shallow dish.

PDF download Download Article
  1. Use a magnet to manipulate the ferrofluid. Since iron oxide is magnetic, it will automatically gravitate toward the force of a magnet. Place your magnet underneath the petri dish and move it around. Have fun playing with your ferrofluid! [4]
    • When the iron oxide mixes with the oil, the iron particles stay suspended in the fluid rather than mixing entirely. When you introduce a magnet to the ferrofluid, the magnet pulls the particles apart, forcing the fluid into interesting shapes, peaks, and valleys.
    • Try moving your magnet to the side and the top of the dish, too. Just be careful not to dip it in the ferrofluid, or things could get messy!

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      Warnings

      • Iron oxide will stain clothes and surfaces. Be careful not to get it on your clothing or countertops during your experiment. [8]
      • Ferrofluid is highly flammable, and while it’s not toxic, it can cause skin irritation. If ferrofluid gets on your skin, rinse well with warm water for 15 minutes. [9]
      Advertisement

      Things You’ll Need

      About This Article

      Thanks to all authors for creating a page that has been read 18,559 times.

      Did this article help you?

      Advertisement