How to Make Off the Shoulder Tops

Off the shoulder tops are simple and versatile. They can be loose, flowing, and romantic, or they can be fitted, trendy, and chic. While you can always buy one from the store, you can make one at home for much less money. If you are an experienced seamstress, you can sew one from scratch. If you are a beginner, or if you'd like to save time, then consider altering an existing shirt instead.

Easiest Way to Make an Off the Shoulder Top

Grab a fitted T-shirt that fits you well and draw a line across the fabric an inch above where you want the shoulder hem. Cut across the line through both layers of fabric. Fold the edges down 1 ⁄ 2 inch (1.3 cm) and press them flat with an iron. Then, sew the hem down using a matching thread color.

Method 1
Method 1 of 3:

Modifying a Fitted T-Shirt

PDF download Download Article
  1. The shirt must be fitted, otherwise it will sag around your shoulders when you wear it. It can have long sleeves or short sleeves.
  2. Watermark wikiHow to Make Off the Shoulder Tops
    Spread the shirt on a flat surface and decide where you want the top hem to be. Use a chalk or pen to draw a line across the shirt, 1 inch (2.5 cm) above that spot. Make sure that you are drawing across the entire shirt, from 1 shoulder to the next. [1]
    • You need that extra 1 inch (2.5 cm) for the hem.
    Advertisement
  3. Watermark wikiHow to Make Off the Shoulder Tops
    Use a sharp pair of fabric scissors to cut straight across the shirt. Make sure that you cut through both layers of fabric. [2]
  4. Watermark wikiHow to Make Off the Shoulder Tops
    Fold the top cut edge down by 1 ⁄ 2 inch (1.3 cm), and press it flat with an iron. Repeat this step 1 more time to get a clean hem. [3]
    • Work your way around the shirt. Use sewing pins to hold the hem down if you have to.
    • Make sure that you are folding the hem inside the shirt.
  5. Watermark wikiHow to Make Off the Shoulder Tops
    Choose a thread color that matches the fabric. Sew as close as possible to the inside folded edge of your hem. Use a stretch stitch, if possible. You can also use a straight stitch and pull on the fabric as you are sewing it. This will allow the thread to stretch while you are wearing the shirt. [4]
    • Another option is to sew the hem with a zigzag stitch instead.
    • A stretch stitch is a special stitch used for stretchy fabrics. Not all sewing machines have this.
    6. Advertisement
Method 2
Method 2 of 3:

Modifying a Button-Up Blouse

PDF download Download Article
  1. Whether or not the blouse has sleeves is up to you; you won't be altering them. The shirt must be baggy enough so that you can take it on and off without opening the buttons. [5]
  2. Watermark wikiHow to Make Off the Shoulder Tops
    Put the shirt on and close the top few buttons. Insert a sewing pin in the front of the shirt and through each sleeve where you want the top hem to be. Most off the shoulder blouses start just above the armpits. [6]
    • You only need a pin on each sleeve and a pin in the front where the buttons are.
  3. Watermark wikiHow to Make Off the Shoulder Tops
    Take the shirt off, close the buttons, and spread it on a flat surface. Use a ruler, measuring tape, or straight edge to ensure that the pins are aligned. If they are not aligned, move the pins up or down until they are. [7]
    • The pins don't need to be in a straight line. They can be curved like a U, but make sure that the 2 outer pins are aligned.
  4. Watermark wikiHow to Make Off the Shoulder Tops
    If you need to, use a fabric pen or chalk to draw a cutting line first. Use a pair of fabric scissors to cut through both layers of the shirt, 1 inch (2.5 cm) above your pins. Remove the pins when you are done. [8]
    • If your top hem is curved, cut 1 ⁄ 2  in (1.3 cm) slits into the cut edge where the curves are.
  5. Watermark wikiHow to Make Off the Shoulder Tops
    Fold the top cut edge into the shirt by 1 ⁄ 2 inch (1.3 cm). Press it flat with an iron, then fold it down by another 1 ⁄ 2 inch (1.3 cm). Press it flat with an iron once more. This will create a clean, neat hem on the inside of your shirt. [9]
    • Do not open the shirt when you reach the buttons. Pretend that the buttons are not there, and treat the overlapping fabric as a single layer.
  6. Watermark wikiHow to Make Off the Shoulder Tops
    Begin sewing in the back of the shirt, as close as possible to the inside folded edge. Leave a 1 in (2.5 cm) gap between your first and last stitches so that you can insert the elastic. Backstitch when you start and finish sewing. [10]
    • Use a straight stitch and match the thread color to the fabric as best as possible.
    • You need to sew over the buttons in the front of the shirt. The opening in the top of the shirt should be big enough for you to fit through.
  7. Watermark wikiHow to Make Off the Shoulder Tops
    Cut a piece of elastic that is long enough to wrap around your shoulders. Clip a safety pin to the elastic, then insert it into the 1 in (2.5 cm) gap in the top hem of your shirt. Use the safety pin to pull the elastic through the top hem until it comes out of the gap again. [11]
    • Be careful not to lose the tail end of the elastic inside the hem of the shirt. Hold it tightly, or secure it to the hem with a pin.
  8. Watermark wikiHow to Make Off the Shoulder Tops
    Overlap the ends of the elastic by 1 to 2 inches (2.5 to 5.1 cm), then secure them with a safety pin. Try the shirt on and see if you like the fit. Take the shirt off and make the elastic tighter or looser, if needed. [12]
  9. Watermark wikiHow to Make Off the Shoulder Tops
    Secure the elastic with a sewing pin and remove the safety pin. Sew across the elastic 3 to 5 times using a zigzag stich on your sewing machine, then remove the sewing pin. Tuck the elastic back into the 1 in (2.5 cm) gap. [13]
  10. Watermark wikiHow to Make Off the Shoulder Tops
    The top hem will be scrunched up thanks to the elastic. Pull on the top hem until it is straight and the fabric lays smoothly. Sew across the gap as close as possible to the inside folded edge. Use a straight stitch and a matching thread color.
    • Remember to backstitch when you start and finish sewing.
    11. Advertisement
Method 3
Method 3 of 3:

Sewing from Scratch

PDF download Download Article
  1. Watermark wikiHow to Make Off the Shoulder Tops
    Fold a sheet of lightweight, woven fabric in half. Draw a rectangle using a piece of chalk or a pen. The rectangle needs to be about 1 inch (2.5 cm) longer than what you want your top to be. The width needs to match your bust circumference. [14]
    • When you sew the 2 rectangles together, your shirt will be twice your bust circumference. This will allow you to gather the shirt with elastic.
    • Great types of fabric for this include cotton and linen.
    • To get your bust circumference: wrap a cloth measuring tape around the widest part of your bust, then record the measurement.
  2. Watermark wikiHow to Make Off the Shoulder Tops
    Draw a curve in each top corner. Make the top of the curve 3 inches (7.6 cm) from the corner, and the bottom of the curve 6 inches (15 cm) from the corner. [15]
    • Alternatively, you can trace the armpits from a tank top that fits you onto the corners of the rectangle.
  3. Watermark wikiHow to Make Off the Shoulder Tops
    Make sure that you use sharp fabric scissors and that you cut through both layers of fabric. There is no need to add seam allowances since your pattern already includes them. [16]
  4. Watermark wikiHow to Make Off the Shoulder Tops
    Pin the 2 rectangle pieces with the right sides facing in. Sew along the left and right side edges using a straight stitch and a 1 ⁄ 4 to 1 ⁄ 2  in (0.64 to 1.27 cm) seam allowance. Backstitch when you start and finish sewing. Finish the raw edges with a serger or zigzag stitch, if desired. [17]
    • Match the thread color as closely as possible to the fabric.
    • Only sew the straight side edges of the rectangle. Do not sew the curved armpits together.
  5. Watermark wikiHow to Make Off the Shoulder Tops
    Fold the edges of the armpits down by 1 ⁄ 4 inch (0.64 cm). Press the fabric with an iron, then fold them by another 1 ⁄ 4 inch (0.64 cm) and press again. Sew the hems down as close to the inside folded edge as possible. Remember to backstitch when you start and finish sewing. [18]
    • Make sure that you are folding the fabric towards the wrong side, not the right side.
  6. Draw a rectangle on your fabric that is 8 1 ⁄ 2 inches (22 cm) tall and twice your shoulder circumference. Cut the rectangle out; you only need 1 piece. This will make a ruffle for your top. [19]
    • The ruffle will act as a decorative element as well as a casing for the elastic. It will also double-up as flowing "sleeves" for the shirt.
    • To get your shoulder circumference: hold a cloth measuring tape behind your back, then wrap it around your shoulders and take the measurement in the front.
  7. Watermark wikiHow to Make Off the Shoulder Tops
    Bring the narrow ends of the rectangle strip together so that the right sides are facing out. Sew them together using a straight stitch and a 1 ⁄ 2  in (1.3 cm) seam allowance. Finish the seam with a serger or zigzag stitch, if desired. [20]
    • Remember to backstitch when you start and finish sewing.
  8. Watermark wikiHow to Make Off the Shoulder Tops
    Fold the bottom edge of the ruffle piece by 1 ⁄ 4 inch (0.64 cm), and press it flat with an iron. Fold the edge by another 1 ⁄ 4 inch (0.64 cm) and press it again. Sew the hem down as close as possible to the inside folded edge. Repeat this step for the bottom edge of the shirt. [21]
    • Make sure that you are folding the edges towards the wrong side of the fabric.
  9. Watermark wikiHow to Make Off the Shoulder Tops
    Make sure that the shirt and ruffle are both turned inside out. Tuck the top of the shirt into the ruffle so that the top raw edges are aligned. Make sure that the seam on the ruffle is centered in the back of the shirt. Pin the back of the shirt to the back of the ruffle, and the front of the shirt to the front.
    • The tube is wider than the shirt. The excess material needs to be hanging off to either side of the armpits.
  10. Watermark wikiHow to Make Off the Shoulder Tops
    Use a straight stitch and a 1 ⁄ 2  in (1.3 cm) seam allowance. Sew the back side first, then sew the front. Don't sew the excess ruffle material to the armpits. This gap will allow you to insert your arms. [22]
  11. Turn the shirt right-side-out first. Fold the ruffle down so that it hangs in front of the shirt, also right-side-out. Fold the top, raw edge of the ruffle down by 1 ⁄ 2 inch (1.3 cm) so that it matches up with the rest of the shirt. [23]
    • The left and right edges of the ruffle should be hanging off to the sides. You won't be sewing them to the shirt.
  12. Watermark wikiHow to Make Off the Shoulder Tops
    Start sewing in the back of the shirt, where the back seam of the ruffle is. Sew your way around the top edge of the shirt and ruffle, then stop when you are 1 inch (2.5 cm) from where you started. [24]
    • Sew as close as possible to the inside edge of the hem on the ruffle and shirt.
  13. Watermark wikiHow to Make Off the Shoulder Tops
    Secure a safety pin to a piece of elastic that's long enough to wrap around your shoulders. Push the elastic through the 1 in (2.5 cm) gap in the top of your shirt. [25]
    • Choose an elastic that is a little bit narrower than your top hem.
  14. Overlap the ends of the elastic by 1 inch (2.5 cm), making sure that it is tight enough to hold the shirt up around your shoulders. Sew the elastic using a zigzag stitch. Tuck it into the gap, then sew the gap using a straight stitch. [26]
    15. Advertisement


Community Q&A

Search
Add New Question
  • Question
    Do I have to sew in between the arm and the body for the elastic band?
    T. Chinsen
    Top Answerer
    The elastic band is only for the uppermost part of the garment that will allow you to wear the top as an off-the-shoulder garment. The instructions from scratch for the garment has a elasticized ruffle that rests off the shoulder with an opening under to allow the arms to pass through. The ruffle would function like straps if they are not pushed off the shoulders. If you are unsure of how it will fit before sewing, use safety pins to hold it together and try it on. Make your adjustments then repin/baste for sewing.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 2
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Make your shirt larger than you think you want it to be. You can always sew it smaller if it is too big, but you can't make a too-small shirt bigger.
        Thanks
        Helpful 0 Not Helpful 0
      • Wash, dry, and iron your fabric before you sew with it to remove shrinkage.
        Thanks
        Helpful 1 Not Helpful 0
      • Trim off all loose or hanging threads for a more professional-looking finish.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Modifying a Fitted T-Shirt

      • Fitted shirt
      • Matching thread
      • Chalk or pen
      • Fabric scissors
      • Sewing pins
      • Sewing machine

      Modifying a Button-Up Blouse

      • Button-Up blouse
      • Matching thread
      • Chalk or pen
      • Fabric scissors
      • Sewing pins
      • Sewing machine
      • Measuring tape
      • Elastic

      Sewing from Scratch

      • Lightweight cotton fabric
      • Matching thread
      • Chalk or pen
      • Fabric scissors
      • Sewing pins
      • Sewing machine
      • Measuring tape
      • Elastic

      You Might Also Like

      How to
      Make a Shirt Smaller
      2 Ways to Cut a V-Neck into a T-Shirt
      9+ Super Cute DIY Ways to Cut a T-Shirt
      How to
      Make a 80s Style Tee Shirt
      How to
      Stretch a Polyester Shirt
      How to
      Make a DIY Sleeveless T-Shirt
      4 Easy Ways to Cut a Large T Shirt So It Looks Better on You
      How to
      Make a Halter Top
      The Best DIY Cutoff T-Shirt
      How to
      Modify Your T Shirt
      How to
      Cut a Shirt
      How to
      Alter a Shirt
      How to
      Make a Slit Sided T Shirt
      How to
      Make Your Own Distressed Shirt
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about sewing, check out our in-depth interview with Shaelynn Haning .

      References

      1. ↑ https://www.youtube.com/watch?v=JH9CDEokHeU&feature=youtu.be&t=43s
      2. ↑ https://www.youtube.com/watch?v=JH9CDEokHeU&feature=youtu.be&t=1m
      3. ↑ https://www.youtube.com/watch?v=JH9CDEokHeU&feature=youtu.be&t=1m31s
      4. ↑ https://www.youtube.com/watch?v=S7HACTrrcYY&feature=youtu.be&t=2m27s
      5. ↑ https://www.trinketsinbloom.com/diy-off-the-shoulder-top/
      6. ↑ https://www.trinketsinbloom.com/diy-off-the-shoulder-top/
      7. ↑ https://www.trinketsinbloom.com/diy-off-the-shoulder-top/
      8. ↑ https://www.trinketsinbloom.com/diy-off-the-shoulder-top/
      9. ↑ https://www.trinketsinbloom.com/diy-off-the-shoulder-top/
      1. ↑ https://www.trinketsinbloom.com/diy-off-the-shoulder-top/
      2. ↑ https://www.trinketsinbloom.com/diy-off-the-shoulder-top/
      3. ↑ https://www.trinketsinbloom.com/diy-off-the-shoulder-top/
      4. ↑ https://www.trinketsinbloom.com/diy-off-the-shoulder-top/
      5. ↑ https://weallsew.com/diy-off-shoulder-ruffle-top/
      6. ↑ https://weallsew.com/diy-off-shoulder-ruffle-top/
      7. ↑ https://weallsew.com/diy-off-shoulder-ruffle-top/
      8. ↑ https://weallsew.com/diy-off-shoulder-ruffle-top/
      9. ↑ https://weallsew.com/diy-off-shoulder-ruffle-top/
      10. ↑ https://weallsew.com/diy-off-shoulder-ruffle-top/
      11. ↑ https://weallsew.com/diy-off-shoulder-ruffle-top/
      12. ↑ https://weallsew.com/diy-off-shoulder-ruffle-top/
      13. ↑ https://weallsew.com/diy-off-shoulder-ruffle-top/
      14. ↑ https://weallsew.com/diy-off-shoulder-ruffle-top/
      15. ↑ https://weallsew.com/diy-off-shoulder-ruffle-top/
      16. ↑ https://weallsew.com/diy-off-shoulder-ruffle-top/
      17. ↑ https://weallsew.com/diy-off-shoulder-ruffle-top/

      About This Article

      Article Summary X

      If you want to modify a fitted T-shirt to make an off-the-shoulder top, draw a line from shoulder to shoulder, about 1 inch above where you want the neckline to be. Use a sharp pair of scissors to cut through both layers of fabric, straight across the shirt. Fold the top edge of the shirt down by about 1/2 of an inch and press it flat with an iron, then fold it one more time, making sure to fold the hem inside the shirt. To finish the shirt, sew the hem down with a stretch, straight, or zigzag stitch. If you’d like to learn how to turn a button-down blouse into an off-the-shoulder shirt, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 80,724 times.

      Did this article help you?

      Advertisement