Download Article
Download Article
The iPhone speaker is pretty weak. Sometimes you just need a little more volume. Luckily, you can amplify the sound of your iPhone using some paper cups. They won't be as good as store-bought speakers, but they will do in a pinch. If you don't have an iPhone, don't worry, this project will work on most other types of phones as well.
Steps
-
Find two paper cups and an empty toilet paper roll. If you can't find an empty toilet paper roll, you can use an empty paper towel roll instead. Consider cutting the paper towel roll in half to make your speakers more compact and sturdy.
-
Trace the base of your iPhone onto the paper roll. Set the roll down horizontally in front of you. Place the base of your iPhone on top of the roll, right in the center. Make sure that your phone is facing you. Use a pen or pencil to trace around the base of your phone. When you are done, set your phone aside.
- This method will also work on other phones and music players, such as iPods.
Advertisement -
Cut out the rectangle you drew partway using a craft knife or box cutter. Using the knife, cut out the front and sides of the rectangle. Leave the back edge uncut.
-
Fold the rectangle up at a 90 degree angle. This will create a sort of tab for your phone to rest against.
-
Use a pen or pencil and the paper roll to trace a circle onto the side of each cup. Position the circles close to the base of the cup. If you make the circles too high up, the speakers won't amplify very well.
-
Cut the circles out using a craft knife or box cutter. Try to cut just inside the lines you drew. This will allow the paper roll to fit snugly inside the holes.
-
Push the cups onto the ends of the paper roll. Don't push the cups all the way onto the per roll. 1 to 2 inches (2.54 to 5.08 centimeters) on each side should be plenty. If the cups wobble too much on the paper tube, draw a line of hot glue around the joint/seam. This will close the gap a little, and make your speakers more stable.
-
Insert the phone into the slot. If you are using another type of phone, ensure that the speaker part is inside the slot. Hit the play and speaker buttons, and enjoy the music.
Advertisement
-
Find a paper cup wide enough to fit your iPhone. You will be placing the phone towards the back of the "speaker" so make sure that the base of the cup is wide enough. This method will also work on other types of phones as well as iPods and similar music players.
-
Use a pen or pencil to trace the base of your phone onto the side of a cup. Try to get as close to the bottom of the cup as you can. The back of the phone needs to be parallel to the base of the cup.
-
Cut the rectangle out partway using a craft knife or box cutter. Cut the sides and the front of the rectangle with your knife. Leave the back edge uncut.
-
Fold the rectangle up at a 90 degree angle. This will create a small tab for your phone to rest against. If you need to, cut a vertical slit down the center of the tab.
-
Place the phone into the rectangle hole, and set the cup down on its side. Hold the cup steady so that your phone is standing upright.
-
Hot glue a pencil to either side of the cup to keep it from rolling around. While holding the speaker stead, place a pencil down to either side of the cup. Push the pencils towards the cup until it no longer rolls around. Secure the pencils to the cup with a hot glue gun. When the glue sets, let go of the speaker. The pencils will hold it steady.
-
Decorate the speaker, if desired. Paint the speaker using spray paint or acrylic paint. Wait until the paint dries before adding more designs. You can also wrap colored washi tape around the rim, or decorate the sides with stickers.
-
Stick the phone into the slot. If you are using another type of phone, be sure that the speaker is inside the slot. Press the play and speaker buttons on your phone, and enjoy the music.
Advertisement
-
Find two paper cups that are the same size. You will be putting the two cups together to make a tapered speaker, so they need to be the same size. If one cup is bigger than the other one, your speaker won't work.
-
Cut the bottom off of each cup using a craft knife or box cutter. Position the knife against the side of the cup, right against the bottom edge. Poke the knife through the wall of the cup. Then, using a sawing motion, cut around the base of the cup until the bottom falls off. Do this for both cups.
-
Draw a rectangle onto the side of each cup, right against the bottom edge. The rectangle needs to be the same thickness as your phone, but only half the width. Align one of the narrow ends of the rectangle with the bottom edge of the cup. These two rectangles will eventually make a slot for your phone to go into.
- This method will also work for other types of phones as well as iPods and similar music players.
-
Cut the rectangle. You can use a craft knife, box cutter, or a pair of scissors to do this. You can cut the rectangles out a few millimeters longer than they actually are; you will be overlapping the cups later, so the slot will shrink.
-
Slide the bottom of one cup into the other, and align the two rectangles. Overlap the twp cups by a few millimeters; if you overlap them too much, your phone may not fit inside. Twist the cups until the rectangles match up.
- Consider sliding your phone into the slot, to make sure it is not too small.
-
Secure the two cups with a piece of tape. Wrap the tape all the way around the seam between the two cups. Fold the ends of the tape into the rectangle slot.
-
Place the speaker on the table and insert your phone into the slot. If you need to, widen the slot a little with a craft knife or box cutter until the phone fits. Hold the speakers until you get the angle you like.
-
Glue a bottle to the front and back of the speaker to hold it steady. Still holding your speaker at the angle you want, place a bottle cap in front of the speaker, and another one behind the speaker. Make sure that they are aligned with the seam. Secure the bottle caps to the speakers with hot glue. Once the glue sets, let go of the speaker. The bottle caps should now hold it steady.
- If you don't have bottle caps, you can use other items, such as Lego bricks or small rocks.
-
Decorate your speakers, if desired. Paint the speakers a using spray paint or acrylic paint. Wait until the paint dries, before adding more designs. You can also wrap colored washi tape around the cup rims and slot edges. For a more playful speaker, decorate it with stickers, such as stars or lightning bolts.
-
Place the phone into the slot. If you are using another type of phone, make sure that the speaker is inside the slit. Hit the play and speaker buttons on your phone, and enjoy the music.
Advertisement
Community Q&A
Search
-
QuestionHow does putting my phone in a cup amplify the sound?Carole BrockCommunity AnswerPutting your phone in a cup compresses the waves of sound a little. This makes them louder.
-
QuestionDoes it sounds like real speakers?Community AnswerIt won't be as loud or clear as real speakers, but it will amplify the sound more than playing the music directly out of your phone.
-
QuestionHow long would this take to make?Community Answerif you are not decorating, then this will take about 3-4 minutes. If you are decorating, it will take about 5- 10 minutes. If you're painting, add 5 minutes of drying time.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
-
Thanks
- Placing an iPhone or iPod into a cup will also help amplify its sound. Some people find that paper cups work better than glass or ceramic. [4] X Research sourceThanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- These speakers aren't as good as store-bought speakers, but they will help amplify the sound of your iPhone. [5] X Research sourceThanks
Advertisement
Things You'll Need
Using Paper Cups and Paper Rolls
- 2 paper cups
- 1 empty toilet paper roll/paper towel roll
- Craft knife or box cutter
- Pen or pencil
- Paint (optional)
- iPhone, iPod, or cellphone
Using a Paper Cup
- 1 paper cup
- Craft knife or box cutter
- Pen or pencil
- 2 pencils or short dowels
- Hot glue
- Paint (optional)
- iPhone, iPod, or cellphone
Using Two Paper Cups
- 2 identical paper cups
- Craft knife or box cutter
- Pen or pencil
- Tape
- Hot glue
- 2 bottle caps
- iPhone, iPod, or cellphone
References
- ↑ http://www.pinkstripeysocks.com/2014/02/diy-ipod-speakers-from-cardboard-roll.html?m=1
- ↑ http://allfortheboys.com/home/2014/6/12/theme-week-diy-speakers.html
- ↑ http://allfortheboys.com/home/2014/6/12/theme-week-diy-speakers.html
- ↑ http://lifehacker.com/5912474/the-best-free-diy-smartphone-volume-boosts
- ↑ http://www.collegetimes.com/college-life/how-to-make-awesome-iphone-speakers-22124
About This Article
Article Summary
X
To boost your iPhone’s sound with a simple speaker, all you need are two paper cups and an empty toilet paper roll. Lay the paper roll on its side and place the base of your iPhone against it, then trace around the base of the iPhone. Use a craft knife to cut out one of the long sides and both short sides of the outline, then fold up the flap at a 90-degree angle. Trace the open end of the toilet paper roll onto one side of each of the cups, near the base. Then, cut out the circles you traced. Push the ends of the roll into the holes in the cups. If you want, decorate the speaker by painting it or drawing designs on it. Insert the base of your iPhone into the slot on the roll and enjoy the amped-up sound.
Did this summary help you?
Thanks to all authors for creating a page that has been read 215,281 times.
Reader Success Stories
- "I've had to put earbuds in a bowl to share music on an ipod (which doesn't have a speaker) and I was trying to think of a way to amplify sound on my phone when I didn't have a bowl or a speaker with me. This info will be a great help next time I find myself required to DJ unprepared, thank you!" ..." more
Advertisement
"I've had to put earbuds in a bowl to share music on an ipod (which doesn't have a speaker) and I was trying to think of a way to amplify sound on my phone when I didn't have a bowl or a speaker with me. This info will be a great help next time I find myself required to DJ unprepared, thank you!"
..."
more
"I tried this method with the toilet paper roll and it worked fine. Now I am thinking of making one out of PVC pipe and seeing if it will work. I will let you know."
..."
more
"It was very nice and very practical for my boy who wants to be an electronic expert in the future. Thanks."
"Thanks for giving this information. I'm very keen to search for some new products to make."
"Man, it's awesome! It just makes the sound higher by about 20% to 30%!"
