How to Make Sea Glass Using a Rock Tumbler

Download Article

Make your own sea glass at home with this fun DIY guide

Co-authored by Douglass Brown and Aly Rusciano

Last Updated: August 2, 2024 Fact Checked

Download Article

Loading the Tumbler

|

Tumbling the Glass

|

Decorating with Sea Glass

|

Expert Interview

|

Expert Q&A

Have you ever been to the beach and seen a frosty, opaque-colored stone? Chances are, that was sea glass (also called beach glass)! But did you know that you don’t have to travel to the beach to see it? Sea glass is a rare mineral created when beach sand becomes weathered by salty waves and wind. It takes many years for a single piece of sea glass to be made in the wild, but only 4 to 5 days to make at home. In this article, we’ll teach you how to make sea glass with a rock tumbler. Weathering pieces of scrap glass at home is easy, and only a few minutes of work will make it look like you’ve scoured the shore for hours.

Things You Should Know

Fill the barrel of the rock tumbler ⅔ of the way full with glass pieces. Then, pour in 2 level tablespoons (25 g) of coarse grit.
Pour cool water into the barrel until it begins filtering up through the glass pieces underneath the coarse grit. Then, seal the tumbler and set it in its base.
Leave the tumbler running for 4-5 days. Then, turn off the tumbler and check your progress.

Method 1

Method 1 of 3:

Loading the Rock Tumbler

Download Article

1
Select a handful of raw glass pieces to tumble. Raw glass is known as “rough,” and will go on to assume the cloudy, weathered finish characteristic of sea glass. Pick out pieces that are at least ¹ ⁄ ₄ inch (0.64 cm) thick and about as big around as a quarter (or slightly larger). Glass that’s too thin will be worn away until there’s virtually nothing left.
- Landscaping glass or “cullet” (recycled industrial glass) is perfect for making sea glass.
- Sea glass is mostly known for its blue, turquoise, and green shades, but you can tumble any color of glass you’d like.
- It’s not recommended to break glass yourself for tumbling. Not only is this dangerous, but it’ll produce small shards of uneven sea glass.
2
Fill the barrel of the rock tumbler ⅔ of the way full with glass pieces. Remove the lid from the barrel and add the glass directly to the bottom. For the best results, it should be mostly full but still have enough room inside for the rough to shift around.
- If you have a large quantity of rough you want to transform into sea glass, it may be necessary to tumble it in multiple batches.
- Always start with a clean tumbler, making sure all traces of grit or leftover fragments from the previous batch are gone before you add new materials. ^{[1]
  X
  Research source}
Advertisement
3
Pour in 2 level tablespoons (25 g) of coarse grit . To tumble glass, use silicon carbide grit or ceramic pellets as a filler. The coarse grit will spread through the empty space around the rough to weather it in all directions. ^{[2]
X
Research source}
- Without filler, the raw glass pieces would smash into one another inside the tumbler barrel and become shattered or scratched.
- Avoid filling the barrel more than ⅔ of the way. If it’s too full, the materials inside won't have anywhere to go, which means any time you spend tumbling will be wasted.
4
Add water to the top of the rough. Run cool water into the barrel until it just begins to filter up through the glass pieces underneath the coarse grit. A little moisture is needed to smooth the glass as it tumbles. This process is similar to the one that causes sea glass to form naturally, as the moisture from the water helps smooth the glass. ^{[3]
X
Research source}
- Be careful not to overfill the barrel, or you could end up with a big mess on your hands.

Method 2

Method 2 of 3:

Tumbling the Glass

Download Article

1
Seal the tumbler tightly. Once all the individual components are inside the barrel, put the lid in place and twist it until it’s secure. If your tumbler barrel features any additional seals, clamps, or clasps, double-check that these are fastened as well.
- Turn the barrel over to inspect for leaks before you begin tumbling.
2
Set the barrel in the electric tumbler base. Turn the barrel sideways and fit it into the open slot in the unit's center. Make sure the knobs on either end are lined up with the vertical supports on the base. Once the barrel is oriented correctly, press it until it sits flush against the belt or rollers.
- Most rock tumblers feature a horizontal construction, but some revolve in a more upright position. These types of tumblers may need to be inserted onto a separate spoke to secure them.
- When you activate the tumbler, the mechanism beneath the barrel will create continuous traction, causing the barrel to spin.
3
Let the tumbler run for 4 to 5 days. Switch on the tumbler unit. The barrel will begin revolving at a slow speed. Inside, you’ll be able to hear the various materials colliding with one another over and over again. Keep the tumbler running like this for at least 4 days. ^{[4]
X
Research source}
- Record the exact time and date you begin running the tumbler, so you’ll know when you need to stop it. ^{[5]
  X
  Research source}
- The constant movement inside the barrel will be a little loud. Try placing the tumbler in a basement, garage, or somewhere else where noise won’t be an issue.
4
Add ¼ tablespoon (3.6 g) of baking soda if gas builds inside the barrel. Some types of glass release gaseous byproducts when they’re ground up. After a few hours or days, it’s possible for these gases to build up inside the barrel, which could cause glass particles to spray out when you remove the lid later. Wear safety glasses to protect your eyes, and add baking soda to absorb the gases and limit the pressure inside the tumbler. ^{[6]
X
Research source}
- Keep an eye on your rock tumbler as it turns. If the barrel looks like it’s bulging, remove the lid momentarily to let the excess gas escape.
- Baking soda isn’t essential for making sea glass; however, it’s good to have on hand as it could help prevent an inconvenient mishap.
5
Check the progress of the glass after at least 4 days. Turn off the tumbler and remove the lid. Select a couple of pieces of tumbled glass and hold them up to the light to evaluate their new physical characteristics. They should be much smoother and have a soft, cloudy quality to them. ^{[7]
X
Research source}
- The longer you weather the glass, the smoother it will become. As a result, overly refined sea glass won’t look as authentic.
6
Rinse off the tumbled glass. The combination of moisture and grinding minerals will produce a watery mud inside the tumbler barrel that can alter the appearance of the glass. Transfer the glass pieces to a colander or mesh strainer and wash them over a bucket so you can inspect them properly. ^{[8]
X
Research source}
- Do not pour the muddy water down the drain. It will quickly re-solidify inside the pipes, clogging them and wreaking havoc on your plumbing. ^{[9]
  X
  Research source}
- To dispose of the liquid grit leftover from tumbling, take the bucket outside and dump it in the grass.
7
Continue tumbling the glass until it achieves the desired appearance. If you’re satisfied with the look of your artificial sea glass, dry off the pieces and put them on display. If you’d prefer your glass to have a clearer, more polished look, load it back into the tumbler and run it for an additional day. ^{[10]
X
Research source}
- Natural sea glass is somewhat rough and murky, with a sort of “frosting” along the outer surface.
- Adding ½ a tablespoon (7.2 g) of TXP aluminum oxide to your final load can lend your tumbled glass a more brilliant, polished finish. ^{[11]
  X
  Research source}

Method 3

Method 3 of 3:

Decorating with Sea Glass

Download Article

1
Make mesmerizing jewelry with large or small sea glass pieces. With its frosty color and unique shape, sea glass is the perfect “jewel” for a necklace, bracelet, earring, or ring. Drill holes in smaller pieces of glass to string together to make a bracelet, or use a larger glass piece as the focal point of a long necklace.
- If jewelry’s not your thing, try stringing pieces of sea glass together to make a keychain.
2
Embellish a picture frame with sea glass. Your colorful tumbled glass can add a bit of beach pizazz to an ordinary picture frame. All you have to do is line a frame with craft glue , arrange the sea glass on the edge of the frame, and let it dry. Now you can display your beach vacation pictures in a beachy frame! ^{[12]
X
Research source}
- No piece of sea glass is the same, meaning no crafted sea glass piece is the same.
- Embrace the odd angles and shapes of the sea glass by arranging them randomly on the frame—just make sure you leave enough window space to see the picture.
3
Create a beachy centerpiece with your sea glass. Fill a glass container, bowl, or vase with sea glass, sea shells, and sea stars to add some beach decor to your living space. This is a beautiful centerpiece for a coffee or dining table and lets you display the treasures you’ve made and/or found. ^{[13]
X
Research source}
- Put pieces of sea glass of all shapes, sizes, and colors in the jar or container to add depth to your centerpiece.
EXPERT TIP

Douglass Brown
Glassblowing Expert
Douglass Brown is a Glassblowing Expert based in Half Moon Bay, California. He has over 25 years of experience as a glass artist, and is the owner and operator of 2 glass blowing studios in the San Francisco Bay Area, Half Moon Bay Art Glass and Mare Island Art Glass. Douglass believes in sharing hot glass experiences with anyone who wants to learn about the processes of blowing and sculpting glass. When not teaching, Douglass creates glass art that is a mix of his takes on nature and functional glassware. He has also created the Glass Troubadours, which is a mobile glass blowing studio that hosts parties, events, and visits craft shows.

Douglass Brown
Glassblowing Expert

It is rare to find two pieces of sea glass of the same size or shape. Sea glass is a type of discarded glass smoothed by tidal actions and exposure to sand. Due to the sand shaping it, sea glass pieces are inconsistent.
4
Place sea glass at the bottom of a vase of flowers. Cleaned sea glass can be the perfect addition to a flower bouquet. Simply set a handful of glass at the bottom of a glass vase, fill the vase with water, and then add your flowers. The sea glass works similarly to pebbles and gives your flower arrangement a bit of whimsy.
- Try matching the sea glass color to your flowers to tie everything together.
5
Build a sea glass mosaic. Each piece of sea glass is unique, like a puzzle piece. Creating mosaics is a great way to use and display sea glass, as all you’ll need is a little imagination and glue . Arrange your sea glass in a shape, picture, or scene. Then, glue each piece in its corresponding place on a piece of paper, wood, or glass. ^{[14]
X
Research source}
- Try drawing or outlining your image first. This way, you can arrange the sea glass inside the picture before gluing.

Expert Q&A

Search

Add New Question

Question

How can I tell if sea glass is natural or manufactured?

Douglass Brown
Glassblowing Expert
Douglass Brown is a Glassblowing Expert based in Half Moon Bay, California. He has over 25 years of experience as a glass artist, and is the owner and operator of 2 glass blowing studios in the San Francisco Bay Area, Half Moon Bay Art Glass and Mare Island Art Glass. Douglass believes in sharing hot glass experiences with anyone who wants to learn about the processes of blowing and sculpting glass. When not teaching, Douglass creates glass art that is a mix of his takes on nature and functional glassware. He has also created the Glass Troubadours, which is a mobile glass blowing studio that hosts parties, events, and visits craft shows.

Douglass Brown

Glassblowing Expert

Expert Answer

To distinguish between natural sea glass and man-made glass, observe the inconsistencies in the surface texture. Sea glass, collected from the beach, often exhibits irregularities caused by the impact of sand, resulting in varying sizes of small chunks on its surface. When examined under a microscope, these inconsistencies become apparent. In contrast, glass that has undergone sandblasting for processes like creating etched glass tends to display a more uniform and consistent texture in the affected areas, making it distinguishable from sea glass.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 1
Question

Can you use salt to make sea glass?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

No, it's recommended to use a medium grit or ceramic pellets to tumble sea glass, as they will give the glass the polished, frosty appearance of natural sea glass.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 3
Question

I would like my tumbled sea glass to be as close to the real thing as possible. Could I use coarse sand from the ocean floor and water from the ocean?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

Coarse sand from the ocean floor can be used in a rock tumbler, but it's not recommended as a grit substitute. The sand particles may not produce enough abrasion to smooth the glass, which can lead to inadequate results.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 5 Helpful 5

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Rock tumblers can cost anywhere from $50 to $300 and come in a variety of sizes. The higher the barrel's capacity, the more you’ll be able to tumble at once. ^{[15]
X
Research source}

Thanks
Helpful 0 Not Helpful 1
Use a pair of tile nippers to trim imperfections and sculpt your sea glass into a more attractive shape.

Thanks
Helpful 0 Not Helpful 0
Wash out your tumbler barrel with water and a drop of soap after each use. Try using a toothbrush to scrub away dirt from the rim.

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Occasionally, the tumbling process will produce glass pieces with sharp, jagged edges. Always be careful when unloading and rinsing the rough.

Thanks
Helpful 2 Not Helpful 0

Things You'll Need

Raw or landscaping glass
Rock tumbler
Coarse grit , silicone carbide grit , or ceramic media pellets
Water
Baking soda (optional)
Colander or mesh strainer
Large bucket

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

Log in

How to Make Sea Glass Using a Rock Tumbler

Things You Should Know

Steps

Loading the Rock Tumbler

Tumbling the Glass

Decorating with Sea Glass

Expert Q&A

Tips

Warnings

Things You'll Need

You Might Also Like

Expert Interview

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories